• Radiation Oncology Journal
• /
• v.3 no.2
• /
• pp.145-151
• /
• 1985

The peripheral dose distributions of wedge fields of Co-60 $\gamma-ray$ and 1 OMV x-ray were measured by the solid state detector controlled by means of semiautomatic water phentom system. The measurements were made on the principal plane parallel to the cross section of wedge filter (blade and ridge direction). For parallel motion of the detector to the beam axis the distance from the margin of radiation field at suface were 3, 5 and 10cm. For tranverse motion the depth of measurement were dm, 5, 10 and 15cm. The followings were drawn from the measurement. 1. The peripheral dose of the blade side of wedges was generally higher than that of the ridge side at symmetric point about beam axis. 2. In the superficial region phenomena of dose build-up appeared. 3. For Co-60 $\gamma-ray$ field, the peripheral dose did not monotonously decrease with the distance from the field margin but increase in some range, consequently showing a peak dose. 4. The peripheral dose did not only depend on radiation quality and field size, but also on wedge angle and wedge direction.

• The Journal of Engineering Geology
• /
• v.28 no.3
• /
• pp.465-473
• /
• 2018

The application of singular value decomposition (SVD) filtering is examined for attenuation of the ground-roll in land seismic data. Prior to the SVD computation to seek singular values containing the highly correlatable reflection energy, processing steps such as automatic gain control, elevation and refraction statics, NMO correction, and residual statics are performed to enhance the horizontal correlationships and continuities of reflections. Optimal parameters of SVD filtering are effectively chosen with diagnostic display of inverse NMO (INMO) corrected CSP (common shot point) gather. On the field data with dispersion of ground-roll overwhelmed, continuities of reflection events are much improved by SVD filtering than f-k filtering by eliminating the ground-roll with preserving the low-frequency reflections. This is well explained in the average amplitude spectra of the f-k and SVD filtered data. The reflectors including horizontal layer of the reservoir are much clearer on the stack section, with laminated events by SVD filtering and subsequent processing steps of spiking deconvolution and time-variant spectral whitening.

• Journal of Distribution Science
• /
• v.13 no.2
• /
• pp.63-73
• /
• 2015

Purpose - Satisfaction with service is evaluated according to customers' subjective judgment. The expected value of customer service and its evaluations depend on the customers' position. The customer recognizes two different forms of service levels. One is satisfaction and the other is dissatisfaction. Customers who are satisfied want to receive the service in future. However, those dissatisfied try to change the service. The service provider tries to improve the service. There are two different service cycles. One is the successful cycle and the other is the failure cycle. This study aimed to empirically determine the effects of the justice and authenticity of service recovery on customer behavioral intention through an integrated approach to cognitive justice and psychological authenticity. Research design, data, and methodology - Based on a literature review, justice of service recovery was categorized into three types: distributive, procedural, and interactive. Then, authenticity was added to obtain four independent variables, along with recovery satisfaction as a parameter. Behavioral intention, as an outcome variable, was divided into the repurchase intention and positive word-of-mouth. The model and hypotheses were created and measurement items were developed. A questionnaire survey of items concerning the service recovery experience at family restaurants was conducted on college students and residents in Gwangju from September 30 to October 31, 2013. A total of 400 copies of the questionnaire were sent out and 385 were returned. Respondents answered questions about the importance of, and satisfaction with service recovery on a 5-point Likert scale. Excluding 174 copies without service failure experiences and 7 inappropriate copies, 204 copies were analyzed using SPSS 21.0 for Windows and AMOS 20.0 to determine the reliability and validity of measurements. The hypotheses were tested through a goodness-of-fit analysis. Results - First, distributive justice positively affected recovery satisfaction. Second, procedural and interactive justice had no impact. Third, authenticity positively affected recovery satisfaction. Fourth, distributive justice had relatively stronger effects on recovery satisfaction than authenticity. Fifth, recovery satisfaction significantly affected repurchase intention and positive word-of-mouth and it proved effective in mediation. Finally, additional analysis was performed for descriptive statistics of the principal variables by various demographic characteristics and significant differences were found in gender, occupation, and so on. Conclusions - This study has academic significance as the fairness and authenticity of service recovery were investigated to reveal the effects on behavior. The findings could be applied to a wide range of service recovery strategies. However, there are some limitations. First, data was collected only from the residents of Gwangju and most respondents were aged 20-30. Future studies should target a wide range of areas and age groups. Second, because the questionnaire used in this study targets only convenience family restaurants, the results of this study cannot be generalized to all services companies. Future research should be done on a wide range of industries such as hotels, airlines, and hospitals, and perform a comparison between sectors.

• Journal of the Korean association of regional geographers
• /
• v.19 no.2
• /
• pp.301-323
• /
• 2013

The government of the UK since the 1990, especially under the new Labour Party, has pursued sustainable development or carbon control as a core strategy for its national development. The seemingly prominent environmental policy for 'greening the government' of the UK as well as considerable achievements in energy and environment indices have attracted much attentions of policy makers and researchers for the 'low carbon green growth' in Korea. This paper tries to see the character of carbon control and environmental policy in the UK not merely as the integrating or mainstreaming policy but a new strategy for national development, that is, for the 'ecologically modernized' state, eco-state, or green state. It defines the environmental policy for carbon control in the UK as the strategy for the green state which has provided it as a principal guide for integrating national policies as a whole, and which has pursued it through market-dependent neoliberal measures. From this point of view, this paper introduces the development process of carbon control and environmental policy mainly under the new Labour Party government in the UK, and gives a reappraisal of both its policy and of energy-environment indices.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.46
• /
• pp.133-158
• /
• 2010

Independent guarantee is a creation of the need from the both sides, i.e. the applicant (principal debtor) and the beneficiary (creditor). The former used to have to deposit cash in favor of the beneficiary in case of his default, which laid a burden on his liquidity while the latter still wanted to have the equivalent to cash. Independent guarantee satisfied the both parties by freeing the applicant of a deposit and maintaining the beneficiary's right at the same time. The fact that independent guarantee has three payment mechanisms is not widely known to the public. They are (i) payment on first demand, (ii) payment upon submission of third-party documents, (iii) payment upon submission of an arbitral or court decision. From the applicant's point of view, the order in his favor is (iii), followed by (ii) and (i). As there shouldn't be a case where one party is at a disadvantage against the other, useful insight is being sought for the benefit of the applicant. First, the applicant can offer his intention to provide a payment mechanism (ii) or (iii) rather than (i) if he must deliver it. Second, if the beneficiary still wants to have (i) and the applicant is in a position not to reject it, the latter should thoroughly check any provisions that may work against him later. Third, the applicant could use counterbalancing provisions in underlying contract to cope with protective clauses in the guarantees. Forth, the applicant should review the beneficiary's sincerity to prevent unfair calling risks. The applicant may use an ECA(Export Credit Agency) in his country to which he can transfer not only unfair calling risks, but also political risks. On the other hand, a bank needs to keep the following advice in mind. The foremost important thing for the bank not to forget is that it provides a guarantee as a service provider, not as a responsible party for the feasibility of the project, etc. Credit risk of the applicant should require the greatest attention when issuing a guarantee: the bank should look into the possibility that it can procure immediate reimbursement from its customers after payment to the beneficiary. Second, the applicant's ability to complete the project should be reviewed by checking its track records, techniques and reputation, etc. Third, the bank may also use an ECA to cover the beneficiary's unfair calling risks as well as political risks. In the case of Korea, as Korea Export Insurance Corporation(KEIC) can cover all the risks mentioned above, the bank could use its service called 'Export Bond Insurance.' What's better for the bank is that ECA cover can enhance the bank's asset quality by putting it zero on its risk weighted asset.

• Journal of Distribution Science
• /
• v.10 no.10
• /
• pp.25-33
• /
• 2012

Purpose - The Garak agricultural wholesale market ('Garak Market') plays a central role in the distribution of agricultural products in Korea and is important in connecting consumers with producers. However, problems regarding inefficiencies and the high-cost structure of the wholesale market's distribution/logistical system are being raised in relation to severe competition among retailers. Furthermore, the service needs of retailers and market users are not being fulfilled due to the inconsistency of the wholesale market's functions and facilities, thus reducing the competitiveness of the market. In this regard, innovative changes are being requested of the agricultural wholesale market according to changes in the agricultural product distribution environment. In particular, the lack of unloading facilities and the outdated unloading system of the wholesale market must be improved to enhance system efficiency. Research design, data, and methodology - This study observed the problems of the unloading system of the agricultural wholesale market in order to present relevant measures for improvement. The need for unloading auctions was also researched in this study. The survey of 70 forwarders belonging to the producing district distributor association of the Garak market was conducted by post. Additionally, 20 auction dealers and 59 shippers and transporters were individually interviewed. The survey on the need for unloading auctions used five-point Likert Scales. The statistical analysis was conducted with SPSS WIN 12.0 software. Results - First, the wholesale market must employ members of the unloading labor union to allow these employees to directly manage the unloading process. Second, it is crucial to revise regulations to ensure that the principal agent pays the unloading cost according to the standard unloading cost system. Third, the vehicle auction carried out for certain vegetable products must be converted to the unloaded auction system. According to the related interviews with the wholesale market's distribution agents, whereas shippers and transporters recognized the need for unloaded auctions, auction dealers tend to have a negative view of this system. Furthermore, the stated reasons in favor of unloaded cabbage, radish, and other vegetable auctions were prevention of constraint, creation of transparent trade conditions, and reduction of corrected seller tickets. Many of the respondents answered that the transport cost reduction rate in unloaded auctions must be below 20%. Fourth, the unloading system must be mechanized and a detailed, reasonable plan must be provided to settle the existing conflict with the unloading labor union. Conclusions - The proposals in this study are expected to play an important role in improving the cargo handling system of the wholesale agricultural product market in the future. Improving the system is expected to help shore up the competitiveness of the industry. If all the related bodies closely cooperate with each other and work harder, taking advantage of the synergies created by the facility modernization project, the Garak market will play a pivotal role in the distribution of agricultural products.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.5
• /
• pp.43-50
• /
• 2012

The Green Infrastructure Framework refers to an interconnected network formed by greenways that links gardens, parks, green spaces, streams, wetlands, agricultural lands, and green belts. Green infrastructure supports diverse functions to environment, provides various benefits to people, and helps in the community's health and viability. It can store stormwater runoff and abate its non-point source pollutants. Due to its advantages and profits, advanced countries in environment policies have adopted green infrastructure in planning and implementing urban and regional development. The Korean government and municipalities have focused upon grey infrastructure investment in the past, which causes occurrence of natural disasters such as draught, flood, and landslides, degradation of water and air quality, decline of biodiversity, and even inhibition of economic activities. In order to alleviate these problems, it is requested to formulate and implement policies for green infrastructure at the national government level. USA and Korean situation of green infrastructure were investigated; forty components of green infrastructure were drawn. Nine policies utilized in the USA cases were identified, which are applicable to Korea. Among them, five policies can be implemented in public sector and four in private one. The green infrastructure law needed in Korea was suggested. The amendments of laws regarding green infrastructure and alternatives expending it were proposed.

• Journal of Navigation and Port Research
• /
• v.35 no.1
• /
• pp.57-62
• /
• 2011

On the view point of renewable energies as energy sources of district heating and cooling plant, the purpose of this study is to develop, classify and map the 500m${\times}$500m mesh, of which is treated as normal size in DHC regulations for evaluation process. Followings are the results. Various building and geographical informations including 13 districts and 108 counties are re-defined to create 500m${\times}$500m meshes, and it is find out that 3,289 meshes among 8,463 meshes have meaningful floor areas. Only 59 meshes(1.8%) are evaluated as mesh which has more than 50% of building volume ratio per mesh. 5 clusters classified by principal analysis and cluster analysis with building needs' characteristics are defined. Gwang-an Dong is representative of cluster 1 characterized as commercial area, and the cluster 4, 5 which has mainly residential needs are distributed in Yong-ho dong. Because there are a lot of cluster 3 meshes, which has complex needs area based on residential, cluster 3 could be defined as representative of Busan metropolitan city.

• International Commerce and Information Review
• /
• v.16 no.1
• /
• pp.45-68
• /
• 2014

Since the introduction of AEO certification in South Korea in 2008, 516 areas have been AEO certified based on a report dated December 31st, 2013. The number is expected to increase drastically as more and more companies strive to obtain the AEO certification. In this regards, this study is designed to contribute to the further invigoration of the AEO certification system as well as to propose directions to improve companies' performance in a practical point of view. To do so, the writer reviewed the past studies done in the relevant subjects in order to 1) grasp the principal subject, 2) catch the areas with insufficient information/lacking points, and to 3) get a focus on future directions on how additional research should be conducted. An analysis of the past studies proved that prior to the introduction of the AEO certification, the focus of the studies were to present the reasons as to why AEO should be introduced, the benefits of AEO, and a comparative analysis of countries already in wide usage of the AEO system. Studies done after the introduction of AEO (that is, after 2008) focused mainly on invigorating the system into the market. Compared to the previous studies, this study will present a distinct conclusion by breaking down the major points of each study on a year-by-year basis and studying them in total in order to provide an even more practical direction in the future of AEO in South Korea.

• The korean journal of orthodontics
• /
• v.14 no.1
• /
• pp.75-92
• /
• 1984

This study attempted to analyze the distribution of stress, to examine the bending effect in the mandible according to the pulling directions and determine on which pulling directions are adequate when an orthopedic force was applied to the mandible. An orthopedic force, 500gm, was applied to the gnathion, one point of the chin area, in three directions. The three directions were ; high puli' from gnathion to the center of condyle head, and vertical pull, from gnathion to a parallel line with the posterior border of the ramus, and medium pull, from the gnathion to a parallel line with the lower border of mandible. The distribution of principal stress, bending moment and amount of displacement within the mandible was analyzed by a 3-dimensional finite element method and that of the various portions of mandible were computed and compared according to the pulling directions. The results were as follows : 1. The bending moment of each part of a mandible has been found to be markedly larger in case of vertical pull than in case of either high pull or medium pull. In vertical pull the bending moment turned out to largest at the condyle head and neck portion, the gonial angle portion, the coronoid portion and the ascending ramus portion, respectively, while comparatively large at the cuspid and bicuspid portion and the first molar portion. In case of high pull it was largest at the gonial angle portion and becoming smaller at the coronoid portion, the ascending ramus portion, the condyle head and neck portion, and the cuspid and bicuspid portion, in that order. In case of medium pull, however, the bending moment was largest at the condyle head and neck portion, becoming smaller at the first molar portion, the ascending ramus portion, the coronoid portion, the cuspid and bicuspid portion, and gonial angle portion, in that order. 2. As for the bending effect it was calculated to be mostly oriented downward at the mandibular body and backward at the mandibular ramus in both high pull and vertical pull. In case of medium pull it was oriented upward at the mandibular body and forward at the mandibular ramus. 3. The bending effect also turned out to be mostly oriented outward in case of high pull and medium pull, and inward in vertical pull. 4. At the mandibular body and ramus, the bending effect in the upward-downward direction and that in the forward-backward direction were found to be larger than in the inward-outward direction. 5. If and when we expect any correcting effect on the mandibular protrusion by means of the chin cup appliance, we can say sure as conclusion that high pull and vertical pull are more effective than medium pull.