• 한국비블리아학회지
• /
• 제2권1호
• /
• pp.66-87
• /
• 1974

It is the prime importance of the information and the reference-librarians to better understand the communication functions of the library since they are the ones to whom the library users come first with their informational needs. Reference librarians often have the problem of providing information to those who may have little experience with, or interest in the library. There is also a problem of finding out what the person really wants, not what he says he wants. Therefore, the interaction between the librarian and the user involves a highly complex activity of communication with each other even before the actual search begins. Reference librarians cannot perform to any degree of success without comprehension of the general patterns and processes of communication in information seeking. Nonverbal as well as verbal transmittal process on the part of both librarians and patrons should not be overlooked. Some of the difficulties and barriers of library communication are brought so that possible cures and improvement may be sought. The basic purpose of the reference interview through which this interpersonal communication takes place is for the reference specialist to enable to link the needs of the patron with potential resource of the library. The writer firmly believes that this importance of the process be taught as well as the materials in reference service regardless of the level of the course offered in library science department.

• 열처리공학회지
• /
• 제27권4호
• /
• pp.180-184
• /
• 2014

In order to make clear relationship between high temperature tensile properties and fine microstructure of rapidly solidified cast-type Ni-base superalloys without heat treatment required for consolidation process, tensile test was carried out by changing strain rate from $5{\times}10^{-5}s^{-1}$ to $2{\times}10^{-2}s^{-1}$ and test temperature from $900^{\circ}C$ to $1050^{\circ}C$ using IN738LC and Rene'80 melt-spinning ribbons by twin roll process which were superior to ribbons by single roll process from the viewpoint of structure homogeneity. The dependence of tensile strength on strain rate and test temperature was studied and strain rate sensitivity, m, were estimated from tensile test results. From this study, it was found that tensile strength was influenced by ${\gamma}^{\prime}$ particle diameter, test temperature and strain rate, and m of ribbons exhibited above 0.3 over $950^{\circ}C$.

• 패션비즈니스
• /
• 제15권4호
• /
• pp.43-54
• /
• 2011

Printing process has been a major sector in the textile industries for a long period of time. With the advent of digital textile printing, the complex procedures of printing preparations and after-treatment processes have been streamlined. For the design of the motives of images to be printed, the use of image handling software, e.g. Photoshop(Adobe), has been of prime importance. Even though the software is extremely useful and functionally versatile, there are many laborious steps involved for the specific textile printing process. The use of a CAD-based textile printing function may help the textile printing process in streamlining the complex processing stages. The image qualities of the output designs have been compared objectively with the aid of several image similarity evaluation schemes including the SSIM, and FSIM Index methods.

• 펄프종이기술
• /
• 제36권4호
• /
• pp.16-24
• /
• 2004

The reduction of paper machine water usage is precursor to the water system closure of any mills. This reduction in water consumption reduces the loss of solids; especially fine particulates and their surface adsorbed chemical additives, from mills, which causes an inevitable increase of fine materials in papermaking systems. Also the reduction of paper machine water usage causes substantial increase of organic and inorganic substances in process water. The deterioration of the papermaking process water quality accompanying the reduction of papermaking system closure can be a prime source of the aggravation of paper quality and process efficiency. It is of great importance for paper mills to investigate the influence of the level of papermaking system closure on the paper properties and process runnabililty before implementing process closure. To predict the changes in paper properties at different levels of system closure, highly cotaminated white water was prepared using reverse osmosis technology and used to prepare handsheets from fine paper and newsprint stocks. Results showed that the quality of process water affects the strength. Preparation of highly contaminated process water and handsheet forming with headbox stocks provided important criteria to determine the relationship between the qualities of process water and paper products.

• 열처리공학회지
• /
• 제11권2호
• /
• pp.99-110
• /
• 1998

The effects of pre-heat treatment(Q/T) on microstructure and hardness of SCM435 structural steel nitrided by micro-pulse plasma was investigated. The quenching and tempering temperatures for obtaining matrix hardness of SCM435 steel on range of HRC30 to HRC40 desired for machine parts were about $860^{\circ}C$ and $500^{\circ}C$ respectively. The case depth of SCM435 nitrided at $480^{\circ}C$ for 5 hours was independent of pre-heat treatment condition and was approximately $150{\mu}m$. However, hardness and compactness of nitrified layer on Q/T treated specimen were more heigher than annealed specimen. The case depth increased linearly with the increase of nitriding temperature, however, the hardness of nitrified layer decreased with the temperature. Phase mixture of ${\gamma}^{\prime}$-phase($Fe_4N$) and ${\varepsilon}$-phase($Fe_3N$) were detected by XRD analysis in the nitrified layer formed at optimum nitriding condition, and only single ${\gamma}^{\prime}$-phase was detected in the nitrified layer formed at higher nitriding temperature such as $540^{\circ}C$. The optimum nitriding temperature was approximately $480^{\circ}C$ which is lower than tempering temperature for preventing softening behavior of SCM435 matrix during nitriding process and the surface hardness of nitrified layer obtained by optimum preheat treatment condition was about Hv930.

• Journal of the Korean Wood Science and Technology
• /
• 제36권6호
• /
• pp.96-104
• /
• 2008

본 연구에서는 고대 칠 기법을 규명하기 위하여 4가지 그룹의 표준칠편을 제작하여 광학현미경(투광, 낙사광, 편광)을 이용한 관찰을 실시하였다. 그룹 I 은 투명한 적갈색을 띠며 일부 층의 구분이 불명확하였고 연마가 된 층은 구분이 쉽게 되었다. 그룹 II는 대부분 투명 황갈색을 띠며 목재표면에 먼저 흑색안료를 메운 후 칠한 칠층과 흑색안료를 혼합하여 칠 한 칠층은 구분이 가능하였다. 그룹 III은 칠이 경화되는 과정에서 상층 부분이 먼저 막을 형성하고 내부는 칠과 불포화지방산이 산화 건조되어 상층의 칠층이 분리되어 관찰되었다. 그룹 IV의 칠도 막은 편광에서 관찰시 철 성분이 검은색과 붉은색으로 혼합되어 보이며 토분은 실리카 결정이 빛의 반사에 의하여 구분되어 졌다. 또한 석간주 칠층은 붉은색을 띠고 주칠과 석간주가 혼합된 칠은 윗부분과 아랫부분이 짙은 붉은 색을 띠며 가운데는 밝은 붉은색으로 구분되어 졌다.

• 한국분말재료학회지
• /
• 제20권4호
• /
• pp.264-268
• /
• 2013

Nickel-based superalloy IN 713C powders have been consolidated by hot isostatic pressing (HIPing). The microstructure and mechanical properties of the superalloys were investigated at the HIPing temperature ranging from $1030^{\circ}C$ to $1230^{\circ}C$. When the IN 713C powder was heated above ${\gamma}^{\prime}$ solvus temperature (about $1180^{\circ}C$), the microstructure was composed of the austenitic FCC matrix phase ${\gamma}$ plus a variety of secondary phases, such as ${\gamma}^{\prime}$ precipitates in ${\gamma}$ matrix and MC carbides at grain boundaries. The yield and tensile strengths of HIPed specimens at room temperature were decreased while the elongation and reduction of area were increased as the processing temperature increased. At $700^{\circ}C$, the strength was similar regardless of HIPing temperature; however, the ductility was drastically increased with increasing the temperature. It is considered that these properties compared to those of cast products are originated from the homogeneity of microstructure obtained from a PM process.

• 한국산학기술학회논문지
• /
• 제17권2호
• /
• pp.378-385
• /
• 2016

전기 분 배전반의 내부 회로 인 부스 바는 충전부의 노출로 인해 전기 사고의 원인이 되며 이로 인한 감전 사고와 단락 사고가 발생된다. 또한 동물 및 이물질 침투로 인한 전기 화재 사고가 발생되는 원인이 되기도 한다. 또한 확장이 불가능한 구조로 무리하게 연결하여 사용하므로 접촉 저항 증가 발생으로 과열 사고를 유발시키기도 하며, 절단과 절곡 등의 제조 공정상의 어려움을 가지고 있기 때문에 주문생산방식을 택할 수밖에 없는 현실이며, 긴급전기 사고 발생시 복구하는데 지연되는 원인이 되기도 한다. 본 논문에서는 이와 같은 문제점을 개선하기 위해서 분 배전반의 모선을 절단하여 개별 블록으로 절연 난연 케이스와 격벽 구조화로 안전성을 높여 모듈 블록화 하였으며, 확장성과 유연성을 구현하였으며, 쉽게 확장이 가능한 구조이며, 또한 쉽게 분 배전반을 조립할 수 있다는 것이며, 이와 같이 전기적 위험 요소를 제거한 전기 분 배전반의 내부 구조는 블록형 부스 바 구조를 가지고 메인차단기와 분기차단기간의 회로 형성 구현 방식의 분 배전반를 제안하고 공인시험기관의 시험을 통해 그 유용성을 입증 하였다.

• 열처리공학회지
• /
• 제11권4호
• /
• pp.305-314
• /
• 1998

This study has been performed to investigate into some effects of various amounts of $CO_2$ and CO gas added to the $50%NH_3-N_2$ based gas atmosphere on microstructure, hardness, chemical analysis and residual stress in the compound and diffusion layer of AISI H13 treated by gaseous nitrocarburising process. The compound layer formed in the surface is composed of mainly ${\varepsilon}-Fe_3$(N,C) and small amount of ${\gamma}^{\prime}-Fe_4N$ and cementite. The maximum hardness value obtainable from H13 steel is shown to be 1200 Hv and the effecvtive hardening depth increases with increasing CO content from 1% to 4%. In the case of CO content over 4%, however, it decreases with increasing CO content. The composition profiles of nitrogen and carbon are found to be within the ${\varepsilon}$-phase field located above the ${\varepsilon}+{\gamma}^{\prime}$ phase field in the Fe-N-C diagram. It is shown that the maximum value of compressive residual stress of H13 steel treated in atmospheres of $50%NH_3-(2,4)%CO_2-N_2-CO$ gas mixture is $48kg/mm^2$ and the depth to which residual stress is in Compressive state is $90{\mu}m$ for the atmosphere $50%NH_3-45%N_2-4%CO_2-1%CO$ gas mixture. It is consequently important to control the maximum value and size of compressive residual stress region in order to obtain desirable mechanical properties.

• 동남아시아연구
• /
• 제23권1호
• /
• pp.45-87
• /
• 2013

This paper aims to study Thai democratic deepening and the constitutional engineering with the analytical concepts of 'power sharing' and 'accountability' focusing on the 1997 and 2007 Constitution. With regard to power sharing, the 1997 Constitution had the characteristics of majoritarian principle including a two-party system, strengthening of prime minister and the executive's power etc. It enhanced significantly the aspects of accountability compared with the previous constitutions. The institutions such as Constitutional Court, Commission on Election, Administration Court, Commission on Human Right, Ombudsman, Commission on Anti-corruption, and the Measure for Anti-money Laundering were established by the 1997 Constitution. However, such empowered accountability system were often abused by the political power groups in the political process. The 2007 Constitution has the characteristics of consensual principle including a multiparty system, proportional representation system, weakened prime minister's power, balancing of cabinet and parliament's power, pushing ahead with decentralization. However, the consensual principle of the 2007 Constitution came, in part, from the factional interests. It is similar to the 1997 Constitution in terms of accountability system, which enhanced in law but abused often in practice. One of the critical reasons for the failure of the 1997 and 2007 constitutions to consolidate democratic system was the political game played around the so-called network for the monarchy composed by the military, the civilian bureaucracy, Constitutional Court and the privileged classes. The future of the Thai democratic deepening depends on the constitutional engineering in which the factional interests should be excluded, and the rules of power sharing and accountability which traditionally played around the network for the monarchy should be effectively institutionalized.