• The Transactions of the Korean Institute of Power Electronics
• /
• v.23 no.2
• /
• pp.101-105
• /
• 2018

Shortage of electric power occurs frequently along with increased electric power demand. ESS is a precaution to solve this issue. Household ESS has a capacity of approximately 3 kW/7 kWh. Household ESS batteries are typically designed with nominal voltages between 40 and 50 V. To connect household ESS with a 220 V AC system, low battery voltages in power conditioning system (PCS) should be boosted. To boost low battery voltage and match it with AC grid voltage, the use of a transformer for a commercial frequency can be considered. To attenuate switching harmonics of the household single-phase ESS-PCS, LC filter can be installed in two positions: on the primary side or on the secondary side of a transformer. A method has been used generally in single-phase inverters for the ESS-PCS. In another method, however, the output efficiency of the ESS-PCS may be decreased. Parasitic components of the transformer can affect voltage losses, when the square wave with the switching frequency in the ESS-PCS is passed through the transformer windings. In this work, the characteristics of the transformer according to the position of an LC filter are investigated for household single-phase ESS-PCS.

• Nuclear Engineering and Technology
• /
• v.41 no.6
• /
• pp.841-848
• /
• 2009

A simple model to analyze non-linear density-wave instability in a sodium-cooled helically coiled steam generator is developed. The model is formulated with three regions with moving boundaries. The homogeneous equilibrium flow model is used for the two-phase region and the shell-side energy conservation is also considered for the heat flux variation in each region. The proposed model is applied to the analysis of two-phase instability in a JAEA (Japan Atomic Energy Agency) 50MWt No.2 steam generator. The steady state results show that the proposed model accurately predicts the six cases of operating temperatures on the primary and secondary sides. The sizes of three regions, the secondary side pressure drop according to the flow rate, and the temperature variation in the vertical direction are also predicted well. The temporal variations of the inlet flow rate according to the throttling coefficient, the boiling and superheating boundaries and the pressure drop in the two-phase and superheating regions are obtained from the unsteady analysis.

• Advances in nano research
• /
• v.13 no.4
• /
• pp.407-416
• /
• 2022

In this study, the gravitating mechanical stir casting method was used to fabricating the Nb₂O₅/AZ31 magnesium matrix nanocomposites. Niobium pentoxide (Nb₂O₅) used as reinforcement with two different weight percentages (3 wt % and 6 wt %). The influence of Nb₂O₅ on microstructure and mechanical properties has been investigated. The microstructure analysis showed that the composites are mainly composed of the primary α-magnesium phase and phase β-Mg₁₇Al₁₂ secondary phase. The secondary phase was dispersed evenly along the grain boundary of the Mg phase. The Nb₂O₅/AZ31 nanocomposites revealed that the grain size and its lamellar shape (β-Mg₁₇Al₁₂) were gradually refined. Different strengthening mechanisms were assessed in terms of their contributions. Results showed that composite material properties of hardness, yield strength, and fracture study were directly related to Nb₂O₅ as a reinforcement. The maximum values of the mechanical properties were achieved with the addition of 3 wt% Nb₂O₅ on the AZ31 alloy.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.1
• /
• pp.31-39
• /
• 2014

In this paper, two calibration methods for angular vibration pickups using a precision rotary encoder are proposed. The KRISS (Korea Research Institute of Standards and Science) primary angular vibration calibration system and the calibration procedures are briefly explained. The rotary encoder is shown to be calibrated in two methods: The one is to use the laser interferometer to calibrate the rotary encoder under test and the other is to exploit the certificate of the encoder supplied. Complex sensitivities measured from the first are shown to be less than 0.1 % difference in magnitude and $0.01^{\circ}$ difference in phase shift in reference to those of the primary calibration system. Their expanded uncertainties were observed to be less than 0.6 % in magnitude and $0.4^{\circ}$ in phase shift over the range of 0.4 to 200 Hz. Under the same calibration conditions, complex sensitivities evaluated by the second method are shown be 0.1 % difference in magnitude and $0.6^{\circ}$ difference in phase shift in reference to those of the primary calibration system. Their expanded uncertainties were seen to be less than 4.8 % in magnitude and $2.8^{\circ}$ in phase shift.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.29 no.5
• /
• pp.434-442
• /
• 2015

The purpose of this review was to survey the Korean Medicine related papers about women with primary dysmenorrhea in order to develop the clinical protocol of the diagnostic medical device. We searched the literature from 2000 through April 2015 using 5 online databases including Oriental Medicine Advanced Searching Integrated Sysptem (OASIS), Research Information Sharing Service (RISS), DataBase Periodical Information Academic (DBpia) and Korean Medical Database (KMBase). We selected papers to meet the following inclusion criteria: the papers involved dysmenorrhea (excluding secondary dysmenorrhea), published papers (excluding textbook, educational materials, conferences, etc.) and the papers matched search keywords or scope, but excluded papers to meet the following exclusion criteria: the duplicative papers, get out of the keywords and scope and not in english or korean language. Finally we found 17 papers and classified the papers according to the three search purposes which were diagnostic tools for evaluating the menstrual pain, dysmenorrhea' pattern identification and menstrual phase. Out of the 16 studies, 4 studies were focused on the diagnostic tools including Visual Analogue Scale (VAS), Measurement of Menstrual Pain (MMP) and etc. Other 5 studies were aimed at menstrual phase, and the other 7 studies were studied for pattern identification. The VAS has been widely used in research and in clinical practice for the detection of the menstrual pain. Treatments for patients with primary dysmenorrhea can be prescribed in consideration of their patterns of sasang constitution or body constitution as following: Qi stagnation-Blood deficiency, cold dampness, Qi deficiency-blood deficiency and liver-kidney deficiency etc. This results of research will be used as a useful material during plan a clinical study of primary dysmenorrhea and acquisition of good clinical data.

• Korean Journal of Veterinary Research
• /
• v.31 no.4
• /
• pp.355-365
• /
• 1991

This study was conducted in order to observe the changes in cellular association of seminiferous tubules from 16 to 24 weeks of age and to obtain the cycle and relative duration of the seminiferous epithelia from 28 to 44 weeks of age in Korean native dogs. The results were summarized as follows; 1. Gonocytes were seen at 16 weeks of age, however they were not observed as from 20 weeks of age. Both type A and type B-spermatogonia occurred from 20 weeks, while primary spermatocytes were found from 20 weeks. Secondary spermatocytes and spermatids appeared from 28 weeks. Spermatozoa were observed at first at 28 weeks of age. 2. Type A-spermatogonia appeared approximately 1.6 times as many at stage II compared to stage I, while the same numbers of cells were seen in both stage I and VII, showing the least number among VIII stages of the cycle of the seminiferous epithelia. The type B-spermatogonia were found from stage VI to VIII, Leptotene phase of the primary spermatocyte divided from type B-spermatogonia in stage VII observed at the stage VIII. Pachytene phase of the primary spermatocytes were shown the least in number at stage IV. The secondary spermatocyte could be seen only at stage IV. 3. The relative frequency of each stage from stage I to VIII of the cycle of the seminiferous epithelia was 30.3, 12.0, 9.8, 4.2, 8.5, 10.5, 11.4 and 13.4% respectively. Thus the establishment of spermatogenesis in Korean native dog was completed from 28 weeks of age.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.6
• /
• pp.410-418
• /
• 2012

Parametric stereo(PS) and MPEG surround(MPS) are major spatial audio coding(SAC) tools. In this paper, the problem of the inter-channel correlation(ICC) synthesis in the conventional SAC is analyzed. Conventional methods assume that ambient components mixed to two output channels are anti-phased, while the primary components are assumed to be in-phased. This assumption can cause excessive ambient mixing for a negative-valued ICC. As a remedy to this problem, we propose a new ICC synthesis method based on an assumption that the primary components are anti-phased each other for a negative ICC. The proposed method is also applied to the approximation which works in practice. The performance of the proposed method was evaluated by computer simulations and the subjective listening tests verified that the proposed method is effective in not only headphones but also loudspeakers playback.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.18 no.2
• /
• pp.131-137
• /
• 2013

In this paper, the phase-shift full-bridge DC/DC converter with fixed-phase operation inverter is proposed. The proposed circuit consists of two full-bridge inverters which are connected in parallel. While one full-bridge inverter operates as the fixed-phase, it regulates the output voltage by adjusting the phase of the other inverter. During the normal operation period, the proposed circuit makes the less amount of conduction loss of the primary switches and secondary synchronous rectifiers, as well as the less amount of the current ripple of the output inductor, than the conventional phase-shift full-bridge DC/DC converter does. Also, it achieves high efficiency by reducing the snubber loss of the secondary synchronous rectifier. To sum up, the present inquiry analyzes the theoretical characteristics of the proposed circuit, and shows the experimental results from a prototype for 450W power supply.

• Journal of Welding and Joining
• /
• v.21 no.2
• /
• pp.89-96
• /
• 2003

The change of microstructures in the base metal during transient liquid phase bonding process of directionally Ni base superalloy, GTD-111 was investigated. Bonds were fabricated using a series of holding times(0-7.2ks) at three different temperatures(1403, 1418 and 1453K) under a vacuum of 13.3mPa. In raw material, ${\gamma}$- ${\gamma}$' eutectic phases, platelet η phases, MC carbide and PFZ were seen in interdendritic regions or near grain boundary and size of primary ${\gamma}$' precipitates near interdendritic regions were bigger than core region. The primary ${\gamma}$' precipitates in dendrite core were dissolved early in bonding process, but ${\gamma}$' precipitates near interdendritic regions were dissolved partially and shape changed. The dissolution rate increased with increasing temperature. Phases in interdendritic regions or near pain boundary continually changed with time at the bonding temperature. In the bonding temperature of 1403K, eutectic phases had not significantly changed, but η phases had transformed from platelet shape to needle morphology and PFZ region had widened with time. The interdendritic region and near pain boundary were liquated partially at 1423k and fully at 1453k by reaction of η phases and PFZ. In the bonding temperature of 1453K, interdendritic region and near pain boundary were liquated and then new phases which mixed with η phases, PFZ and MC carbide crystallized during cooling. Crystallized η phases transformed from rod shape to platelet shape with increasing holding time.

• Journal of Korea Foundry Society
• /
• v.21 no.4
• /
• pp.239-245
• /
• 2001

Microstructure and mechanical properties of Sn-3.1 wt.%Ag-6.9 wt.%Bi system solders on Cu-substrate were studied. The Sn3.1 wt.%Ag-6.9 wt.%Bi alloy was designed by phase diagram and chemical properties and was prepared by melting in argon atmosphere. The mechanical properties of solder/Cu joints were examined by shear strength test, and also creep test. The microstructure of Sn-3.1 wt.%Ag-6.9 wt.%Bi alloy consists of Bi-rich phase and $Ag_3Sn$ precipitate in {\beta}-Sn$ matrix phase. The shear strength of the joint was decreased with aging treatment. Crack path under shear test was through the solder. Similar crack path change mode was observed at the creep test of solder/Cu joint. The creep behavior of Sn-3.1 wt.%Ag-6.9 wt.%Bi alloy represented the inverse primary creep behavior at all test condition. It is suggested that the inverse primary creep behavior is induced from Bi solute atoms in Sn-matrix. The creep resistance of Sn-3.1Ag-6.9Bi alloy is better than that of Sn-3.5 wt.%Ag alloy at all test conditions.