• 전력전자학회논문지
• /
• 제23권2호
• /
• pp.101-105
• /
• 2018

Shortage of electric power occurs frequently along with increased electric power demand. ESS is a precaution to solve this issue. Household ESS has a capacity of approximately 3 kW/7 kWh. Household ESS batteries are typically designed with nominal voltages between 40 and 50 V. To connect household ESS with a 220 V AC system, low battery voltages in power conditioning system (PCS) should be boosted. To boost low battery voltage and match it with AC grid voltage, the use of a transformer for a commercial frequency can be considered. To attenuate switching harmonics of the household single-phase ESS-PCS, LC filter can be installed in two positions: on the primary side or on the secondary side of a transformer. A method has been used generally in single-phase inverters for the ESS-PCS. In another method, however, the output efficiency of the ESS-PCS may be decreased. Parasitic components of the transformer can affect voltage losses, when the square wave with the switching frequency in the ESS-PCS is passed through the transformer windings. In this work, the characteristics of the transformer according to the position of an LC filter are investigated for household single-phase ESS-PCS.

• Nuclear Engineering and Technology
• /
• 제41권6호
• /
• pp.841-848
• /
• 2009

A simple model to analyze non-linear density-wave instability in a sodium-cooled helically coiled steam generator is developed. The model is formulated with three regions with moving boundaries. The homogeneous equilibrium flow model is used for the two-phase region and the shell-side energy conservation is also considered for the heat flux variation in each region. The proposed model is applied to the analysis of two-phase instability in a JAEA (Japan Atomic Energy Agency) 50MWt No.2 steam generator. The steady state results show that the proposed model accurately predicts the six cases of operating temperatures on the primary and secondary sides. The sizes of three regions, the secondary side pressure drop according to the flow rate, and the temperature variation in the vertical direction are also predicted well. The temporal variations of the inlet flow rate according to the throttling coefficient, the boiling and superheating boundaries and the pressure drop in the two-phase and superheating regions are obtained from the unsteady analysis.

• Advances in nano research
• /
• 제13권4호
• /
• pp.407-416
• /
• 2022

In this study, the gravitating mechanical stir casting method was used to fabricating the Nb₂O₅/AZ31 magnesium matrix nanocomposites. Niobium pentoxide (Nb₂O₅) used as reinforcement with two different weight percentages (3 wt % and 6 wt %). The influence of Nb₂O₅ on microstructure and mechanical properties has been investigated. The microstructure analysis showed that the composites are mainly composed of the primary α-magnesium phase and phase β-Mg₁₇Al₁₂ secondary phase. The secondary phase was dispersed evenly along the grain boundary of the Mg phase. The Nb₂O₅/AZ31 nanocomposites revealed that the grain size and its lamellar shape (β-Mg₁₇Al₁₂) were gradually refined. Different strengthening mechanisms were assessed in terms of their contributions. Results showed that composite material properties of hardness, yield strength, and fracture study were directly related to Nb₂O₅ as a reinforcement. The maximum values of the mechanical properties were achieved with the addition of 3 wt% Nb₂O₅ on the AZ31 alloy.

• 한국음향학회지
• /
• 제33권1호
• /
• pp.31-39
• /
• 2014

본 논문은 고정밀 회전엔코더를 이용한 회전진동 교정시스템의 실현방안을 제안한다. 제안된 시스템과 비교를 위해 한국표준과학연구원의 회전진동 절대교정시스템을 소개하며 회전진동 센서의 교정을 위한 장치와 측정 불확도 모델을 각각 제시한다. 제안된 방법은 회전엔코더의 교정방법에 따라 두 가지 로 나뉘는데 첫 번째는 레이저 간섭계를 이용하여 교정된 엔코더를 사용하는 방법이고, 두 번째는 제조사가 제공하는 성적서를 이용하여 교정 불확도를 평가하는 방법이다. 0.4 ~ 200 Hz의 교정주파수 구간에서 각가속도계를 교정한 결과, 첫 번째 제안된 방법은 절대교정시스템을 기준으로 감도 차이가 0.1 % 그리고 위상 차이는 $0.01^{\circ}$이내였으며 최대 확장불확도 진폭은 0.6 % 그리고 위상은 $0.4^{\circ}$ 이었다. 두 번째 제안된 방법은 절대교정시스템을 기준으로 감도차이가 진폭은 0.1 % 그리고 위상차이는 $0.6^{\circ}$ 이내였으며 최대 확장불확도는 진폭 4.8 % 와 위상 $2.8^{\circ}$이었다.

• 동의생리병리학회지
• /
• 제29권5호
• /
• pp.434-442
• /
• 2015

The purpose of this review was to survey the Korean Medicine related papers about women with primary dysmenorrhea in order to develop the clinical protocol of the diagnostic medical device. We searched the literature from 2000 through April 2015 using 5 online databases including Oriental Medicine Advanced Searching Integrated Sysptem (OASIS), Research Information Sharing Service (RISS), DataBase Periodical Information Academic (DBpia) and Korean Medical Database (KMBase). We selected papers to meet the following inclusion criteria: the papers involved dysmenorrhea (excluding secondary dysmenorrhea), published papers (excluding textbook, educational materials, conferences, etc.) and the papers matched search keywords or scope, but excluded papers to meet the following exclusion criteria: the duplicative papers, get out of the keywords and scope and not in english or korean language. Finally we found 17 papers and classified the papers according to the three search purposes which were diagnostic tools for evaluating the menstrual pain, dysmenorrhea' pattern identification and menstrual phase. Out of the 16 studies, 4 studies were focused on the diagnostic tools including Visual Analogue Scale (VAS), Measurement of Menstrual Pain (MMP) and etc. Other 5 studies were aimed at menstrual phase, and the other 7 studies were studied for pattern identification. The VAS has been widely used in research and in clinical practice for the detection of the menstrual pain. Treatments for patients with primary dysmenorrhea can be prescribed in consideration of their patterns of sasang constitution or body constitution as following: Qi stagnation-Blood deficiency, cold dampness, Qi deficiency-blood deficiency and liver-kidney deficiency etc. This results of research will be used as a useful material during plan a clinical study of primary dysmenorrhea and acquisition of good clinical data.

• 대한수의학회지
• /
• 제31권4호
• /
• pp.355-365
• /
• 1991

This study was conducted in order to observe the changes in cellular association of seminiferous tubules from 16 to 24 weeks of age and to obtain the cycle and relative duration of the seminiferous epithelia from 28 to 44 weeks of age in Korean native dogs. The results were summarized as follows; 1. Gonocytes were seen at 16 weeks of age, however they were not observed as from 20 weeks of age. Both type A and type B-spermatogonia occurred from 20 weeks, while primary spermatocytes were found from 20 weeks. Secondary spermatocytes and spermatids appeared from 28 weeks. Spermatozoa were observed at first at 28 weeks of age. 2. Type A-spermatogonia appeared approximately 1.6 times as many at stage II compared to stage I, while the same numbers of cells were seen in both stage I and VII, showing the least number among VIII stages of the cycle of the seminiferous epithelia. The type B-spermatogonia were found from stage VI to VIII, Leptotene phase of the primary spermatocyte divided from type B-spermatogonia in stage VII observed at the stage VIII. Pachytene phase of the primary spermatocytes were shown the least in number at stage IV. The secondary spermatocyte could be seen only at stage IV. 3. The relative frequency of each stage from stage I to VIII of the cycle of the seminiferous epithelia was 30.3, 12.0, 9.8, 4.2, 8.5, 10.5, 11.4 and 13.4% respectively. Thus the establishment of spermatogenesis in Korean native dog was completed from 28 weeks of age.

• 한국음향학회지
• /
• 제31권6호
• /
• pp.410-418
• /
• 2012

파라메트릭 스테레오와 MPEG 서라운드는 대표적인 공간 오디오 부호화 기법이다. 본 논문에서는 기존의 공간 오디오 부호화 기법에서 채널간 상관도 합성의 문제점을 분석하였다. 기존의 방법에서는 출력신호에 합성되는 주요성분들은 서로 동위상 관계에 있는 반면 잔향성분들은 서로 반위상 관계에 있다고 가정하고 있다. 음수 채널간 상관도에 대해서 이러한 가정은 잔향성분을 과도하게 포함하도록 하는 문제점을 야기할 수 있다. 이에 대한 해결책으로 음수 채널간 상관도를 가지는 경우에 대해서는 주요성분들이 반위상 관계에 있다는 가정을 기반으로 새로운 채널간 상관도 합성 기법을 제안하였다. 제안된 기법은 실제 부호화 및 복호화기에서 동작하는 근사화 과정에도 적용되었다. 컴퓨터 시뮬레이션을 통하여 제안된 기법의 성능을 평가하였으며 주관적 청취 실험을 통하여 제안된 방법이 헤드폰 환경뿐만 아니라 스피커 환경에서도 효과적으로 동작함을 검증하였다.

• 전력전자학회논문지
• /
• 제18권2호
• /
• pp.131-137
• /
• 2013

In this paper, the phase-shift full-bridge DC/DC converter with fixed-phase operation inverter is proposed. The proposed circuit consists of two full-bridge inverters which are connected in parallel. While one full-bridge inverter operates as the fixed-phase, it regulates the output voltage by adjusting the phase of the other inverter. During the normal operation period, the proposed circuit makes the less amount of conduction loss of the primary switches and secondary synchronous rectifiers, as well as the less amount of the current ripple of the output inductor, than the conventional phase-shift full-bridge DC/DC converter does. Also, it achieves high efficiency by reducing the snubber loss of the secondary synchronous rectifier. To sum up, the present inquiry analyzes the theoretical characteristics of the proposed circuit, and shows the experimental results from a prototype for 450W power supply.

• Journal of Welding and Joining
• /
• 제21권2호
• /
• pp.89-96
• /
• 2003

The change of microstructures in the base metal during transient liquid phase bonding process of directionally Ni base superalloy, GTD-111 was investigated. Bonds were fabricated using a series of holding times(0-7.2ks) at three different temperatures(1403, 1418 and 1453K) under a vacuum of 13.3mPa. In raw material, ${\gamma}$- ${\gamma}$' eutectic phases, platelet η phases, MC carbide and PFZ were seen in interdendritic regions or near grain boundary and size of primary ${\gamma}$' precipitates near interdendritic regions were bigger than core region. The primary ${\gamma}$' precipitates in dendrite core were dissolved early in bonding process, but ${\gamma}$' precipitates near interdendritic regions were dissolved partially and shape changed. The dissolution rate increased with increasing temperature. Phases in interdendritic regions or near pain boundary continually changed with time at the bonding temperature. In the bonding temperature of 1403K, eutectic phases had not significantly changed, but η phases had transformed from platelet shape to needle morphology and PFZ region had widened with time. The interdendritic region and near pain boundary were liquated partially at 1423k and fully at 1453k by reaction of η phases and PFZ. In the bonding temperature of 1453K, interdendritic region and near pain boundary were liquated and then new phases which mixed with η phases, PFZ and MC carbide crystallized during cooling. Crystallized η phases transformed from rod shape to platelet shape with increasing holding time.

• 한국주조공학회지
• /
• 제21권4호
• /
• pp.239-245
• /
• 2001

Microstructure and mechanical properties of Sn-3.1 wt.%Ag-6.9 wt.%Bi system solders on Cu-substrate were studied. The Sn3.1 wt.%Ag-6.9 wt.%Bi alloy was designed by phase diagram and chemical properties and was prepared by melting in argon atmosphere. The mechanical properties of solder/Cu joints were examined by shear strength test, and also creep test. The microstructure of Sn-3.1 wt.%Ag-6.9 wt.%Bi alloy consists of Bi-rich phase and $Ag_3Sn$ precipitate in {\beta}-Sn$ matrix phase. The shear strength of the joint was decreased with aging treatment. Crack path under shear test was through the solder. Similar crack path change mode was observed at the creep test of solder/Cu joint. The creep behavior of Sn-3.1 wt.%Ag-6.9 wt.%Bi alloy represented the inverse primary creep behavior at all test condition. It is suggested that the inverse primary creep behavior is induced from Bi solute atoms in Sn-matrix. The creep resistance of Sn-3.1Ag-6.9Bi alloy is better than that of Sn-3.5 wt.%Ag alloy at all test conditions.