• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.3
• /
• pp.407-412
• /
• 2002

The primary cause of missing teeth vary depending on the region. The loss of posterior teeth is mainly due to dental caries, whereas that of the anterior teeth occur primarily due to trauma at the age of standing and walking and secondarily from the rampant dental caries. Particularly, reduction of the arch length in the cases of premature loss of primary teeth may compromise the eruption of succedaneous permanent teeth. This may result in crowding and impaction of the permanent teeth, and asymmetry of arch, thus a careful consideration for space maintenance should be made in such cases. Space maintainer is required in the case of premature loss of primary posterior teeth, because space loss result from the approximate and centrifugal movement of the neighboring teeth. Generally, in the case of primary incisor, space loss occurs when 1) tooth contact is relevant, 2) crowding in primary dentition is present, and 3) a primary incisor is lost before the eruption of primary canine. Contrarily, in the case of primary dentition with interdental space, space loss will not be observed, mostly when a primary incisor is lost after the eruption of primary canine. Thus, using a space maintainer in cases of premature loss of primary incisor has been introduced primarily not for the purpose of space maintaining but for an aesthetic purpose, prevention of parafunctional oral habits such as tongue thrust, and of pronunciation. Additionally, few case studies have been reported of space loss in cases of premature loss of primary incisor. This study is to report cases of the space loss following the premature loss of primary incisors observed in children.

• The Journal of the Korean dental association
• /
• v.21 no.12 s.175
• /
• pp.979-984
• /
• 1983

As an appraisal of Water Fluoridation Program in Chungju, fluoride content in the water of that city was examined, and 1317 K primary school children aged from 6 to 13 were surveyed on their oral hygiene status. The results were as follows: 1. Fluoride content ....................... 0.8 ppm 2. dmfrate ..................................... 81.17% DMF rate .......................................... 38.88% 3. dmf t rate/index ................................ 29.17%/2.55 dmf s rate/index ............................... 14.33%/6.27 4. DMF T rate/index ............................. 6.32%/0.92 DMF S rate/index ............................ 1.86%/1.35

• The Journal of the Korean dental association
• /
• v.22 no.12 s.187
• /
• pp.1059-1066
• /
• 1984

As an appraisal of Water Fluoridation Program in Chungju, fluoride content in the water of that city was examined, and 1176 K primary school children aged from 6 to 13 were surveyed on their oral hygiene status. The results were as followings: 1. Fluoride content ............ 0.8 ppm 2. dmf rate ............ 59.27% DMF rate ............ 39.46% 3. dmf t rate/index ............ 27.75%/2.40 dmf s rate/index ............ 11.91%/5.14 4. DMF T rate/index ............ 6.12%/0.93 DMF S rate/index ............ 1.65%/1.26

• Journal of the korean academy of Pediatric Dentistry
• /
• v.42 no.1
• /
• pp.53-61
• /
• 2015

This study was conducted for the purpose of evaluating the stainless steel crowns on extracted primary molars and thus identifying frequent errors and defects. Visual assessment and micro-computed tomography (micro-CT) image analysis were performed on 97 primary molars for evaluation of the state of marginal adaptation, cement loss, secondary caries, ledge formation, attritive perforation and marginal polishing defect. The results were as follows: In the examination of object teeth by evaluation criteria, cement loss was found most frequently (98%), followed by secondary caries (42.3%), marginal polishing defect (41.2%), ledge formation (29.9%) and attritive perforation (17.5%), in this order. The cement loss at the margins showed a significant relationship with marginal gap and secondary caries: the larger the marginal gap is, the more frequent is the cement loss (p < 0.05). The average marginal gap was $0.31{\pm}0.26mm$ and showed the highest value in the maxillary 2nd primary molars. The location of the crown margin above the cementoenamel junction was found most frequently and it was found that the higher the crown margin is located, the less the marginal gap becomes (p < 0.05). In conclusion, it is thought very desirable to pay closer attention to crown margins and shapes for stainless steel crown restoration in order to minimize the marginal gaps and consequent cement loss.

• The Journal of the Korean dental association
• /
• v.57 no.8
• /
• pp.474-479
• /
• 2019

The purpose of the pulp treatment is to make the function of the primary molar in the oral cavity possible for as long as possible until the exfoliation of the tooth or the development of the occlusion is as long as possible. The pulpectomy is a relatively common procedure for the pediatric dentist in the clinic with dental care of the children nowadays. Primary molar is morphologically more susceptible to dental caries than permanent tooth, and the dental pulp treatment is frequently performed. Furthermore, unlike permanent teeth, the root canal has a large degree of curvature and morphological diversity and complexity, careful consideration is needed. Therefore, it is very important to comprehensively understand the morphological characteristics and diversity of the root and root canals for the successful pulp treatment of the primary molars.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.3
• /
• pp.290-298
• /
• 2018

This study aimed to evaluate surface morphology and resin tag penetration of resin infiltration into primary anterior teeth after enamel deproteinization with sodium hypochlorite (NaOCl) prior to phosphoric acid ($H_3PO_4$) etching. Ninety primary anterior teeth with non-cavitated caries lesion were devided five groups according to enamel pretreatment as follows, group I-15% hydrochloric acid (HCl) 2min. ; group II-5.25% NaOCl 1min., 35% $H_3PO_4$ 1min. ; group III-5.25% NaOCl 2min., 35% $H_3PO_4$ 1min. ; group IV-5.25% NaOCl 1min., 35% $H_3PO_4$ 2min. ; group V-5.25% NaOCl 2min., 35% $H_3PO_4$ 2min. Fifteen teeth were examined etched surface structure using field emission-scanning electron microscope. Seventy five teeth were infiltrated with resin, maximum penetration depth and percentage penetration were analysed using dual fluorescence confocal microscopy. As the application time of NaOCl increased, ratio of enamel type I, II were increased. Percentage penetration (PP) was higher in group V than group II, III (p < 0.05). PP of group IV, V did not show any differences. Non-cavitated caries of primary anterior teeth can be treated with resin infiltration. Enamel deproteinization with NaOCl prior to 35% $H_3PO_4$ etching could be an alternative of 15% HCl etching in resin infiltration.

• The Journal of the Korean dental association
• /
• v.16 no.6 s.109
• /
• pp.455-464
• /
• 1978

• Journal of the korean academy of Pediatric Dentistry
• /
• v.47 no.3
• /
• pp.293-302
• /
• 2020

The purpose of this study was to evaluate the applicability of virtual reality simulation after experience of dental caries diagnosis for dental students before exposing to clinical pediatric practice. A pediatric patient model of a five-year-old child with primary dentition was developed and a caries model that is amenable to VR(virtual reality) diagnosis was organized and set-up. The dental student's were allowed to use the simulated model for fifteen minutes and their experiences were evaluated using a self-reported questionnaire to evaluate presence and usability of this application. Overall, virtual presence and appearance area of the simulation were highly scored. The result indicates that the VR model has no significant difference from the actual clinical caries regardless of grade of students, gender and VR experience. If the prototype is continuously advanced, its applicability in dental education will increase.

• Journal of Korean society of Dental Hygiene
• /
• v.10 no.1
• /
• pp.215-229
• /
• 2010

Objectives : This study was to assess the children's mean number of decayed or filled primary teeth in relation to their mother's oral health behavior and then to increase children's oral health. Methods : The 346 children and their mothers were selected for this study. The children were 4 or 7 years old in the 4 dental clinics in Busan and Kyungnam, Korea. Data were collected by examination on children and self-administrated questionnaire on their mothers. The questionnaire was surveyed mother's oral health behaviour and children experienced dental caries or not and the number of decayed or filled they had were used as outcome variables. Results : 1. The mother's education level affected children's dft index significantly(p<0.05), In the case of tooth brushing method of children, the group with circle teeth wipes shows the low dft index(p<0.01). 2. On the other hand the group with snack as food eaten between meals has high dft index(p<0.001). 3. The group with mother's visiting to dentist within recent 1 year, experience in removing plaque or willing to attend the oral health education show low dft index(p<0.05). The important variables affecting to dft index are experience with oral health education, tooth brushing guidance, replacement of toothbrushes, the kind of food eaten between meals, recent experience of plaque removal and willing to participating in the oral health class. Conclusions : This study showed that the mother's oral health behavior and concern play an important role for the prevention of preschooler's dental caries. Dental health education would be focused on the mothers, expecially for the practice of preventive behavior by preschools themselves.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.2
• /
• pp.210-216
• /
• 2002

Air abrasion technology can prepare enamel and dentin for bonding, similar to etching by acidic gels and solutions. Longer treatment can excavate pit and fissures, preparing the tooth for immediate placement of bonded resin materials. Although not appropriate for every clinical situation, the air abrasive technology minimizes heat, vibration and bone-conducted noise associated with conventional means of caries removal since the cutting is accomplished by air pressure. Also, patients treated with the air-abrasion technology rarely request anesthesia. Air abrasion technology was more effective in treating early carious lesions and stains compared to lesions where caries had already progressed to produce soft dentin and the strong air stream and noise caused by the evacuation system was a major discomfort to pediatric patients, and the experience and skillfulness of clinician should be required for accurate and proper tooth preparation.