• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.7
• /
• pp.854-867
• /
• 2014

In the circumstance that high oil price state is continued over the world, the investment in crude oil development by oil major is a trend of increasing. Recently the number of delivered drill-ship for 5 years has been sharply increased all over the world and about twice than that of past 30 years. As addition to the increase of the drill-ship demand, the operation of drill-ships which is delivered recently is about 3,000 meters, ultra deep sea, on average and the work area is expending. Accordingly the drilling system including the size and length of pipe for drilling has been bigger and bigger and the power supply equipment for operation system also has large capacity. Unlike merchant vessel, high power and high voltage of diesel generators are required for drill-ship for which the demand for V-type 320 bore of diesel generator has increased. It is on the raised that the importance of lubrication oil cleaning for diesel generator on drill-ship which has longer time for construction, and also long term low load operation is unavoidable during commissioning of equipments. Recently it was reported that engine crankpin was damaged due to the hard contact caused by the abnormal wear down(Cam wear) on crankpin and bearing. The same pattern of wear down was found through the inspection on series vessels and the other vessel under commissioning. The purpose of this paper is to analyze of the wear mechanism based on the observation and theories and objective research from actual cases and to prepare the counter measures to avoid foreseeable damage when the lubricating oil is not properly cleaned.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.2
• /
• pp.151-159
• /
• 2021

Cost information in the Korean construction industry is mainly controlled by the government agencies. However, there have been wild-spread speculations among participants on the adequacy of these unit prices and difference with the actual market condition. Korean public-led unit prices are developed using mainly a top-down approach by a few designated public institutions. Due to the rapid fluctuations in market prices and high-volume of information, it is impossible for a few public institutions to properly consider market conditions. However, there are almost none private cost reference while many are available in other countries to supplement the public cost references. Needs for private cost references have recognized, and this study can be seen as a pilot study to support them. This study attempts to identify the problem areas of Korean cost references and to provide guidance by benchmarking other countries. This study has confirmed the need of developing market-driven cost references by employing a bottom-up approach in which a large number of various construction participants are fostered to provide their own cost information and share with others. It is envisioned that this study provides foundations for further study on the development on-line construction market platform based on abundant and appropriate cost information.

• Journal of Korean Theatre Studies Association
• /
• no.40
• /
• pp.207-237
• /
• 2010

Concentrating on the birth, life, and death of the Living Theatre, almost half a century avant-garde group, the primary purpose of this study at large is to explore its counter-cultural philosophy. While taking a chronological form adapting the biological order, the paper focuses on the troupe's productions: , , , , and . Through out these productions the philosophy of the Living Theatre seemed to included communal, anti-intellectual, politically radical, generally Utopian, and proselytizers for sexual freedom. The history of the Living Theatre interestingly parallels the history of the Beck's theatre in occupation and shut down. The first New York theatre was closed by fire inspectors for instance. The second theatre was declared unsafe, and locked up by the Building Department. The third theatre was seized by the IRS, consequently shut down. In 1984, after more than 25years from the third building, the Living Theatre settled once again on East Third Street in Manhattan. The theatre was however evacuated by the New York City Fire Department in 1993 and once more took to the road. With these struggles, the Becks' profound aspiration of the counter-cultural insurgency came to harden as strong as 'iron' in some ways. With the outstanding components of counter-cultural philosophy and style, the Living Theatre, in the course of the transformation, absorbed and then reflected virtually every phase for the Living Theatre were vehicles for more than just aesthetics. The group seemed to propagandize its beliefs rather performing productions. Accordingly, both on and off-stage action of the Living Theatre caused great controversy either through political activism of individual members or through the unconventional collective life style. No avant-garde theatre company was more emblematic of the rebellious spirit of the sixties than the Living Theatre. Like the first great transformation, the Becks' encounter, their personal values and the form of theatre they created had blended 'so inextricably that the vitality of each was dependent on the other.' The Becks always urged unity and harmony at all levels of human life, but not at any price. The anticapitalist ideal inspired the Becks to promote a politically motivated campaign throughout their productions. They believed the revolution is desirable but in the state of non-violence and the expansion of human consciousness. Julian Beck's gravestone identifies his as pet, painter, actor, and anarchist. The Living Theatre was a 'small umbrella' under which the Becks and its members could breath and unfold their dream on stage or in the street.

• Journal of Applied Tourism Food and Beverage Management and Research
• /
• v.14 no.2
• /
• pp.95-119
• /
• 2003

Case Study about the management of bakery menu through a menu analysis: This study checked the sales of bakeries this researcher has operated for 4 weeks before evaluating the menu with Kasavana & Smith Analysis, changing the position of the menu on the theoretical base of space composition and then checking the sales for 4 weeks again and analyzing in the same way. The study compared the two groups by using the menu analysis. The menu used in the analysis included 31 items produced in the stores and 29 items turned out from the headquarters. The results of the menu evaluation through Kasavana & Smith Analysis are as follows: (i) before changing the position of the menu 22 Stars, 20 Puzzles, 15 Plowhorses, 13 Dogs (ii) after changing the position 18 Stars, 24 Puzzles, 12 Plowhorses, 6 Dogs During the study, it was inconvenient that many things not thought about before were discovered. The limitations of the study are as below: a) when the displayed items were sold out, they couldn't be supplied continuously. The items from the headquarters were supplied as many as the ordered volume. As the stores prepared materials only for the day, they only produced bakeries as many as the dairy target. So it is difficult for them to keep extra bakery. b) it is natural that a new item make the sales of the existing items cut down. During the study, there appeared a new item, which influenced on the sales. c) as the store this researcher manages is smaller than the others, it was difficult to change all the position of the menu. With only 18 items changing their positions, there couldn't obtain more accurate data. d) because of the franchise contract, there fixed the prices of supply and sale. Therefore the price of Plowhorse couldn't be changed. However on the base of this study, it can search more specific ways to efficiently manage the bakery business in the future.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.6
• /
• pp.9-17
• /
• 2012

In 1960's, Korea had concentrated on economic development, in the meantime the existing problem which is an avoiding rural settlement phenomenon such as a farming population decrease, an unstabel income, poor surroundings, etc. could intensify. And because of an exodus from agricultural area caused by industrialization and a fall of agricultural farm price as a result of domestic agricultural market opening in accordance with FTA, in 2004 Korean government excuted the integrated rural-village development plan as a measure to provide more support for agricultural villages. The integrated rural-village development plan means that inter-connected with villages which have potnetial and developed it as a unit of small-zone, also we can assume it a Down-up development type because residents participate and lead this plan directly. But, this plan made progress rapidly as a countmeasure of government so, it needs to evaluate for completed project area and make an improvement for a sustainable undertaking. Therefore, this study categorized project contents systematically into two parts of Hardware and Software, after that composed of 4 large-parts, 13 mid-parts and 43 small-parts from Inje-Yongdai zone which was designated for an integrated rural-village development plan in 2004. And a result of analysis for project contents priorities by hierarchy analysis method showed the Regional capability reinforcement is selected for the most important project content by 3 stakeholders who are specialists (514pts.), Korea Rural Community Corporation staffs (694pts.), local government officers (688pts.)

• Proceedings of the KIEE Conference
• /
• 2006.05a
• /
• pp.74-77
• /
• 2006

This research is focused on the development of GIS Diagnostic SYSTEM to prevent accidents beforehand by inspecting the internal defects of GIS (Gas Insulated Switchgear) which is a main power-facility for substations. GIS Diagnostic SYSTEM is categorized as 'Real time on-line test type' and 'Portable test type' depending on the types of testing, it uses PD(partial discharge) which mostly incurs in GIS internal defects, to inspect. As of now, mostly foreign equipments are imported for use due to the lack of the technology localization, and these are installed and operated on only some parts of highly-graded GIS power-facilities such as in 76skv or 345kv for its being expensive. Furthermore, other than foreign equipments being costly, it also has a weak point of very long unavailability in case of Diagnostic system break-down while using, because it takes a comparatively long period of corrective maintenance precesses. We have localized to develop personal real-time multi -functional GIS Diagnostic system which can test on all GIS power-facility comprehensively and economically therefore overcome all these problems mentioned above, a market expansion is expected from the decrease of price and replacing the import equipments in the future. As the equipment was developed to be Personal for the simple ways of installing and utilizing, it can be operated without any complex cable installation like other existing GIS Diagnostic system requires, therefore also decrease the cost of cable installation.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.649-652
• /
• 2005

The camera cellular phone has a large portion of cellular phone market in recent year. The variety of a customer demand makes a fast model change and the spatial resolution is changed from VGA to multi-mega pixel. The 1.3 mega pixel (MP) camera cellular phone was first released into the Korean market in October 2003. The major cellular phone companies released a 2MP camera cellular phone that supports zoom function and a 2MP camera cellular phone is settled down with the Korea cellular phone market. It makes a keen competition in price and demands automation for phone camera module. There is an increasing requirement for the automatic assembly to correspond to a fast model change. The hard automation techniques that rely on dedicated manufacturing system are too inflexible to meet this requirement. Therefore in this study, this system is designed with the flexibility concept in order to cope with phone camera module change. The system has a same platform that has X-Y-Z motion or X-Z motion with ${\mu}m$order accuracy. It has a special gripper according to the type of a component to be put together. If the camera model changes, the gripper may be updated to fit for the camera module. The controller of this system acquires the data sets that have the information about the assembly part by the tray. This information is obtained ahead of an inspection step. The controller excludes an inferior part to be assembled by using this information to diminish the inferior goods. The assembly jig used in this system has a function of self adjustment that reduces the tact time and also diminish the inferior goods. Finally, the intelligent assembly system for phone camera module will be designed to get a flexibility to meet model change and a high productivity with a high reliability.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.10 no.3
• /
• pp.111-126
• /
• 2008

This article aims to discover the current status and appropriate way to research Gyubang craft, expecting its development and preservation, and elevating it to Korea's unique artistic textile culture. It also searches improved methods for Gyubang craft as the following: First, in order to avoid confusions about Gyubang craft, appropriate concepts and definitions of Gyubang craft must be settled through a discussion among experts. Second, by activating economic activities at lower ratio, among purposes of Gyubang craft, achievements must be elevated. Third, in order to settle down the difficulties of Gyubang craft, a variety of methods such as effective sewing machines and manufacturing techniques as well as providing materials at a reasonable price, considering practical ways through diversifying products, elevating the economy of crafts, exploring sales routes, improving educational contents, and expanding educational places must be facilitated. Fourth, for nurturing talented and excellent human resources in the area of Gyubang craft, the followings should be considered: diversifying contents of education, developing textbooks, improving instructors' quality, providing reasonable cost of education, educating on the utilization and application of Gyubang craft, introducing efficient teaching methods through textbooks and multimedia, awarding 'certificates' to trainees, and permitting certificate holders' to instruct Gyubang craft. Finally, it is convinced that the achievement of production, pride of preserving tradition, pleasure of procedural work, economic activities as experts, and sales of products will be reinforced, and the population for Gyubang craft is also expected to increase. By elevating Gyubang craft into Korea's traditional textile art, Korea's global competitiveness in the area of textile should be strengthened.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.39 no.1
• /
• pp.63-76
• /
• 2015

This study conducted a survey to gauge the buying and wearing propensities of wearers of leg guards made for baseball catchers, as well as product characteristics of preferred leg guards. Data from the survey were analyzed to obtain basic data for the development of an advanced leg guard design. Degree of compression, horizontal distance, cross section view and outline 3D sketch were also analyzed from the 3D data of leg guards; in addition, mobility and kinematic analysis were conducted through a wearing test. The survey indicated that imported products dominate the current retail market because they are appreciated by customers in terms of fit, price, brand, and protection. Representative complaints of products were discomfort, pressure, and the heavy-weight of the leg guards in general attributed to overall structure and 3D shape. When the pressure was lower on the front area of knee, it feels better to wear and the average knee angular velocity during the up and down motion increased, which suggests a better design from a kinematic point of view. The knee is the primary part of the body responsible for any movement of the lower limbs; consequently, the degree of compression and support stability of the leg guards near the knee area are important factors to evaluate the performance of leg guards. The results of our study indicate significant opportunities for improvement in product design and the development of baseball leg guards along with an ergonomic design that considers the mobility of the knee, skin deformations is necessary to improve performance. The process followed in this study will be applicable to studies on other personal protective equipment for sports.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.7
• /
• pp.1087-1099
• /
• 2010

This study explores the retail environment factors of the changes mentioned in the "Factors and Directions of the Change of the Apparel Retail Structure in Korea" (Part I) to understand the changes in apparel retail institutions. This study was done through a literature research method and the results are as follows. First, changing consumer needs and trends require extensive new products, a method to manufacture diverse products according to the market demand, and the necessity to manufacture based on trends in demand. This limits the role of mass production, which brought about more flexible manufacturing modes, scaled down manufacturing factories, promoted more cooperative subcontract relationships, and increased global sourcing which uses other companies at the most appropriate global venue. How to organize and use cooperative networks that benefit companies is the key to global competitiveness in the new era and the information technology developed around retail shops plays a key role. Consequently, the management of consumers and their information becomes critical and retail distribution functions become a key corporate function. In addition, it is difficult for small shops to introduce effective new technologies that encourage the growth of large companies. Second, apparel companies that use to benefit from scale merits based on the previous mass production system are now becoming effective by using economies of scale through mass retailing while shops are enlarging their sizes as a way to survive. On the other hand, inexpensive clothes become even more inexpensive while expensive ones become even more expensive, promoting polarization and diverse price ranges that widen consumer options.