• Korean Chemical Engineering Research
• /
• 제54권4호
• /
• pp.448-452
• /
• 2016

새로운 수송용 에너지자원으로 각광받는 바이오매스의 효율적인 당화를 위한 전처리방법이 연구되고 있다. 최근 바이오매스의 에너지 전환 공정 중 전처리 비용이 높은 비중을 차지하고 있으며 이중 폐수처리가 커다란 문제점으로 지적되고 있다. 따라서 폐수발생을 줄이고 재사용이 용이한 유기용매(Organosolv)를 이용한 전처리를 수행하였으며, 전처리 바이오매스의 잔류 고형물의 양과 제거된 성분의 양을 이용하여 바이오매스의 전처리 효과를 효소당화를 통해 알아보았다. 전처리에 사용한 유기용매로는 99.5 wt% 에탄올을 사용하였고, 초본계 바이오매스인 옥수수대(corn stover)를 이용하여 전처리 하였다. 전처리 효과는 $130{\sim}190^{\circ}C$ 조건에서 시간대별로 진행하여 전처리된 바이오매스의 효소당화를 통하여 확인하였다. 효소당화결과로 가장 높은 글루코오스 당화율을 보였던 전처리 온도는 $190^{\circ}C$에서 반응시간 70분 이상의 조건 이였으며, 이 때 68% 이상의 당화율을 얻을 수 있었다. 또한 전처리 바이오매스의 잔류 고형물(Solid remaining)은 70% 이상이었고, 대부분의 셀룰로오스(Cellulose)와 헤미셀룰로오스(Hemicellulose)의 손실이 미비하여 대부분의 당 성분을 회수할 수 있다는 장점을 보였다.

• 한국농공학회논문집
• /
• 제62권2호
• /
• pp.17-29
• /
• 2020

The objective of this study was to find an optimum methane yield condition in anaerobic digestion of sewage sludge with microwave pretreatment. The pretreatment process was carried out using a lab scale industrial microwave unit (2,450 MHz frequency). The digestion efficiency of pretreated sludge was evaluated by biochemical methane potential (BMP) test. Box-Behnken design and Response Surface Analysis (RSA) were applied to determine the optimal combination of sludge mixing ratio (0 to 100%), power (400 to 1600 W), holding time (0 to 10 min) and pretreatment temperature (60 to 100℃). BMP test results showed that Volatile Solid (VS) removal efficiency was up to 48% at a condition of 0% for mixing ratio, 1600 W for power, 5 min for holding time, and 80℃ for pretreatment temperature. Methane production was up to 832.3 mL/g VS_removed at a condition of 50% for mixing ratio, 1000 W for power, 5 min for holding time, and 80℃ for pretreatment temperature. The results of the variance analysis (ANOVA) showed that the p-value of the power and pretreatment temperature among the independent variables were significant (p<0.05), and in particular, the pretreatment temperature significantly affected on the solubilization and methane production. The optimum condition for the maximum methane yield (847 mL/g VS_removed) was consist of 38.4% of mixing ratio, 909.1 W of power, 4.1 min of holding time, and 80℃ of temperature within the design boundaries.

• Journal of the Korean Wood Science and Technology
• /
• 제27권4호
• /
• pp.65-71
• /
• 1999

This study was carried out to investigate the effect of xylanase pretreatment of the unbleached hardwood kraft pulp during the conventional Chlorine-Extraction- Hypochlorite (CEH) bleaching on pulp property. Optimum bleaching condition was evaluated by using Novozym produced from the fungus Humicola insolens. Also the effect of chelating agent prior to enzyme treatment was analyzed. The kappa number of enzymatic bleached pulp at the enzyme charge 10 IU/ml was slightly similar to that of bleached pulp without enzyme. By enzyme treatment, the chlorine charge in conventional CEH bleaching process of hardwood KP could be reduced by 17%, while no adverse effect on pulp yield and strength was. The optimum condition for enzyme pretreatment was 10 IU/ml xylanase charge, 3 to 4 hrs treatment, and 2% pulp consistency. In sugar composition in the enzyme pretreated pulp, arabinose and mannose were not much different, but more xylose was retained. This high content of hemicellulose in pulp seems to play an important role in pulp properties. The pulp pretreatment by chelating agent prior to enzyme treatment could improve the enzyme activity and enhance the bleaching effect at 0.2% diethylenetriamine pentaacetic acid (DTPA) charges.

• 유기물자원화
• /
• 제31권1호
• /
• pp.27-34
• /
• 2023

본 연구에서는 버섯 폐배지의 혐기성소화 효율 향상을 위해 수열전처리를 실시하고, 리그노셀룰로오스계 물질의 고온 가수분해 과정에서 생성될 수 있는 중간산물이 기질의 생분해도와 바이오가스 전환 효율에 미치는 영향을 함께 판단하였다. 수열전처리 온도의 범위를 150, 180, 210℃로 설정하였으며, 모든 수열전처리 온도에서 기질의 가용화율이 향상되는 결과를 확인할 수 있었다. 추가적으로, 150℃로 버섯 폐배지를 전처리한 경우에는 혐기성소화 효율에 영향을 미칠 수 있는 C/N 비가 개선되는 효과를 함께 확인하였다. 다만 전처리 온도가 180, 210℃인 경우에는 오히려 150℃로 전처리를 수행한 경우에 비해 메탄 생성량이 저하되는 경향을 보였는데, 이는 리그노셀룰로오스 물질의 중간분해 산물인 퓨란유도체의 형성으로 인해 메탄생성균이 영향을 받은 것으로 판단된다. 결국, 수열전처리를 통해 리그노셀룰로오스계 바이오매스의 가용화율 향상을 통한 메탄 생성 향상을 기대할 수 있으나, 혐기성소화 효율을 저해할 수 있는 중간산물이 생성되지 않는 적정 전처리 온도의 확인과 적용이 중요할 것으로 판단된다.

• KSBB Journal
• /
• 제29권3호
• /
• pp.193-198
• /
• 2014

Pretreatment of wastepaper using aqueous glycerol under high pressure was studied to enhance the enzymatic hydrolysis. The pretreatment was conducted over a wide range of conditions including temperatures of $150{\sim}170^{\circ}C$, sulfuric acid concentrations of 0.5~1.5%, and reaction times of 30~90 minutes. After the effect of glycerol concentration on the pretreatment performance was investigated, 70% glycerol was selected. As glycerol concentration was increased, higher digestibility was achieved due to higher lignin removal. The optimum condition was found to be around $160^{\circ}C$, 1%, and 60 minutes. At this condition, 60% and 35% of hemicellulose and lignin, respectively, were removed, while only 5% of cellulose was lost. The enzymatic digestibility was 76%, meaning that 73% of the glucan present in the initial substrate was recovered as glucose after enzymatic hydrolysis. Also, it was found that the temperature and acid concentration than the reaction time were more strongly related to the compositional removals and enzymatic digestibility.

• 한국대기환경학회지
• /
• 제18권3호
• /
• pp.205-212
• /
• 2002

The catalytic combustion of benzene, toluene and xylene over Pt-based catalyst was investigated in a fixed bed flow reactor system with atmospheric pressure to recycle the waste industrial catalyst for the processes of removing volatile organic compounds. According to the pretreatment condition, the properties of the waste Pt-based catalyst were characterized by XRD (X-ray diffraction) and BET (Brunauer-Emmett-Toller). In the carte of air pretreatment, 20$0^{\circ}C$ was found to be optimal, and increasing pretreatment temperature resulted in the reduction of the catalytic activity. When Pt-based catalyst pretreated at 20$0^{\circ}C$ by alto was retreated by hydrogen, the catalytic activity increased by increasing treatment temperature. In the case of HNO$_3$aqueous solution pretreatment, the catalytic activity decreased by increasing the concentration of HNO$_3$aqueous solution. The catalytic activity was seen to observe the following sequence : benzene > toluene > xylene.

• Journal of Microbiology and Biotechnology
• /
• 제19권8호
• /
• pp.845-850
• /
• 2009

Bioethanol derived from lignocellulosic biomass has the potential to replace gasoline. Cellulose is naturally recalcitrant to enzymatic attack, and it also surrounded by the matrix of xylan and lignin, which enhances the recalcitrance. Therefore, lignocellulosic materials must be pretreated to make the cellulose easily degraded into sugars and further fermented to ethanol. In this work, hydrothermal pretreatment on corn stover at $195^{\circ}C$ for 15 min with and without lower concentration of formic acid was compared in terms of sugar recoveries and ethanol fermentation. For pretreatment with formic acid, the overall glucan recovery was 89% and pretreatment without formic acid yielded the recovery of 94%. Compared with glucan, xylan was more sensitive to the pretreatment condition. The lowest xylan recovery of 55% was obtained after pretreatment with formic acid and the highest of 75% found following pretreatment without formic acid. Toxicity tests of liquor parts showed that there were no inhibitions found for both pretreatment conditions. After simultaneous saccharification and fermentation (SSF) of the pretreated corn stover with Baker's yeast, the highest ethanol yield of 76.5% of the theoretical was observed from corn stover pretreated at $195^{\circ}C$ for 15 min with formic acid.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2002년도 총회 및 춘계학술발표회
• /
• pp.54-57
• /
• 2002

Pretreatment technologies are defined as technologies that prepare or condition dredged material for subsequent, more rigorous treatment processes. The objectives of this study are to test the feasibility of treating dredged sediment using pretreatment process(hydrocyclone, sedimentation basin, and flotation), and to estimate design parameters for a pilot-plant design. The final goal of the project is to recycle the dredged sediment that is otherwise reused as construction materials.

• Fibers and Polymers
• /
• 제5권2호
• /
• pp.117-121
• /
• 2004

Optimum condition concerning the content of pretreatment print paste and steaming time for ink-jet printing was newly developed through the orthogonal analysis. The cotton fabric treated under the newly developed optimum condition could achieve a high level of colour yield similar to that of the commercially pretreated cotton fabric available in the market for ink-jet printing. The results were discussed thoroughly in this paper.

• KSBB Journal
• /
• 제28권1호
• /
• pp.48-53
• /
• 2013

Pretreatment of wastepaper using aqueous glycerol was investigated to enhance the enzymatic hydrolysis. The effects of four factors (solid/liquid ratio, glycerol concentration, acid concentration, and reaction time) on the dissolution yield, the removal of cellulose, hemicellulose and lignin, and the enzymatic digestibility were examined at $150^{\circ}C$. The 1/8 of solid/liquid was determined to perform the reaction uniformly, and the 93% of glycerol concentration was found to be a minimum concentration to conduct the reaction under atmospheric pressure. Also, it was found that the acid concentration and reaction time were strongly related to the dissolution yield and the removal of cellulose, hemicellulose and lignin, but moderately to the enzymatic digestibility. At an optimum condition of $150^{\circ}C$, 1 h and 1% acid concentration, 56% and 49% of hemicellulose and lignin, respectively, were removed, while only 4% of cellulose was removed. The enzymatic digestibility at this condition was 86%, meaning that 83% of the glucan present in the initial substrate was converted to glucose. Compared to glycerol with ethylene glycol as a pretreatment solvent, glycerol is much cheaper than ethylene glycol, but ethylene glycol is superior to glycerol in delignification.