• 상하수도학회지
• /
• 제22권1호
• /
• pp.49-63
• /
• 2008

The objectives of this research were to evaluate the pressurized/the main inlet water flowrate ratio which have been used as the most important parameter for operating the pump diffusion mixer until now, to suggest the alternative operating parameter and the relating criteria if the flowrate ratio was not inadequate. For the objectives of this research, computational fluid dynamics (CFD) simulation was conducted for 21 cases of flowrate ratio in full-scaled pump diffusion mixer. From the results of CFD simulation, the local velocity gradient values were calculated in each case in order to analyze the simulation results in more detail. For verifying CFD simulation, wet test was conducted. The wet test was to measure the factual coagulant dispersion distribution at a distance of 5.4m from deflector. From both results of CFD simulation and wet test, flowrate ratio was inadequate as operating parameter or criteria, on the other hand the pressurized/the main inlet velocity ratio(dimensionless) was useful in predicting the performance of pump diffusion mixer. Also, the injected coagulant could be dispersed evenly in overall cross section on the condition that pressurized/the main inlet velocity ratio(dimensionless) is over at least 20.

• 한국수소및신에너지학회논문집
• /
• 제33권6호
• /
• pp.827-837
• /
• 2022

If the hydrogen industry is activated, the introduction of C-type and pressurized liquefied hydrogen (LH2) tank suitable for small and medium-sized transp- ortation and storage will be given priority in the future. Therefore in this paper, the behavior for the LH2 property changes and boil-off gas (BOG) treatment of the C-type cargo tank through voyage of the LH2 carrier and pressurized tank of the LH2 receiving terminal were analyzed through computational simulations by making assumptions about the carrier operation and unloading conditions.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.11-12
• /
• 2010

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2018년도 추계학술논문요약집
• /
• pp.327-328
• /
• 2018

• Asian-Australasian Journal of Animal Sciences
• /
• 제22권2호
• /
• pp.282-288
• /
• 2009

The present paper describes the effects of pressure and post-mortem aging treatments on in situ proteasome activity in rabbit and bovine skeletal muscles. Synthetic peptide hydrolyzing activity of rabbit proteasomes remained in the muscle after exposure to pressures up to 100 MPa. However, when a pressure of 400 MPa or more was applied, proteasomes were markedly inactivated. The extraction of proteasomes from excessively pressurized muscle appeared to be difficult. Proteasomes in aged muscle remained relatively stable throughout the aging process, with activity after 168 h (7 days) being 35%, 48%, 53% and 31% of the 0 h post-mortem LLVY, LSTR, AAF and LLE total hydrolyzing activities, respectively. The synthetic peptide hydrolyzing activities of bovine muscle proteasomes were similar to those of rabbit skeletal muscle proteasomes. The results suggest that synthetic peptide hydrolyzing activity remains in muscle exposed to relatively low pressures. Furthermore, it is known that high-pressure treatment induces fragmentation of myofibrils, modification of actin-myosin interaction and activation of intramuscular proteinases, cathepsins and calpains. Thus, proteasomes are probably involved in the tenderization process in combination with other intramuscular proteinases under high-pressure conditions. Our findings confirmed that proteasomes play a role in meat tenderization induced by high-pressure treatment or aging.

• Journal of the Korean Wood Science and Technology
• /
• 제42권2호
• /
• pp.172-182
• /
• 2014

Extraction is a necessary element in the bioconversion of lignocellulosics to fuels and chemicals. Although various forms of chemical pretreatment of cellulosic materials have been proposed, their effectiveness varies depending on the treatment conditions and substrate. In this study, mixed hardwood (MH) and loblolly pine (LP) were pretreated with dilute acid in a 100 mL accelerated solvent extraction (ASE) at the predetermined optimal conditions: temperature: $170^{\circ}C$, acid concentration: 0.5% (w/v), and reaction time: 2~64 min. This method was highly effective for extracting the hemicellulose fraction. Total xmg (defined as the sum of xylose, mannose, and galactose) can be extracted from milled MH and LP through pressurized dilute acid treatment in maximum yields of 12.6 g/L and 15.3 g/L, respectively, representing 60.5% and 70.4% of the maximum possible yields, respectively. The crystallinity index increased upon pretreatment, reflecting the removal of the amorphous portion of biomass. The crystalline structure of the cellulose in the biomass, however, was not changed by the ASE extraction process.

• Food Science and Biotechnology
• /
• 제16권1호
• /
• pp.49-54
• /
• 2007

The effects of hydrostatic pressure (HP) treatment on the physicochemical, morphological, and textural properties of bovine semitendinosus (ST) muscle were assessed. Based on SDS-PAGE, the decrease in HP-treated ST muscle protein solubility in 0.1 M KCl buffer (pH 7.0) was attributable to a reduction in the levels of sarcoplasmic protein, and the protein solubility decrease observed in 0.6 M KCl buffer (PH 7.0) was attributable to a reduction in the levels of myosin heavy-chain and actin. Scanning electron microscope (SEM) observations showed that muscle fibers became finer and more compact with increasing pressures. The shear force and hardness of ST muscle pressurized to 300 MPa decreased significantly (p<0.05), however samples pressurized at 100 and 500 MPa exhibited a significant increase in both attributes relative to the control sample (p<0.05).

• 한국세라믹학회지
• /
• 제29권12호
• /
• pp.970-980
• /
• 1992

${\gamma}-alumina$ membranes were prepared by sol-gel dip coating or pressurized coating of boehmite sols on slipcasted ${\gamma}-alumina$ support tubes. The particle size of sols synthesized via the modified Yoldas-method could be controlled below 5 mn according to the mole ratio of nitric acid/aluminumtri-sec-butoxide (0.07~1.0). The reproducible crack-free composite membranes were produced by the 2nd dip coating or the pressurized coating technique using very stable sols with the particle size of 45 nm. Nitrogen gas permeability through the top-layer in the composite membrane was about $70~55{\times}10^{-7}\;mol/m^2{\cdot}s{\cdot}Pa$. The thermal stability of the top layer was proved to be good enough upto the heat-treatment temperature of $500^{\circ}C$.

• 대한환경공학회지
• /
• 제27권11호
• /
• pp.1162-1167
• /
• 2005

축산폐수는 고농도의 난분해성 유기물질을 많이 함유하고 있기 때문에 처리하기가 매우 어려운 것으로 알려져 있다. 따라서 본 연구에서는 현장에 건설된 오존을 이용한 시스템인 DOF(Dissolved Ozone Flotation)와 PO2(Pressurized Ozone Oxidation)에 의한 축산폐수의 처리특성을 조사하였다. DOF-PO2의 유입수내에 존재하는 SS의 제거율은 94%를 상회하여 약 400 mg/L의 농도를 22 mg/L까지 낮출 수 있었다. $COD_{Mn}$의 제거율도 90%정도로 620 mg/L로 유입되어 63 mg/L로 유출되었다. $SCOD_{Cr}$은 890 mg/L 정도가 유입되었으며 82%가 제거되어 160 mg/L 정도로 유출되었다. UV-254흡광도는 96%제거 되었다. 특히 TP의 제거율은 98%가 넘었고 27 mg/L가 유입되어 0.35 mg/L만이 유출되었다. TN도 SS의 제거와 함께 68%정도 제거되었으나 오존에 의한 제거효과는 없었다. DOF-PO2시스템에 의한 고농도 오존산화공정을 미생물처리공정과 같이 적용할 경우 축산폐수처리공정의 방류수 수질기준을 맞출 수 있었다.

• 멤브레인
• /
• 제27권4호
• /
• pp.367-373
• /
• 2017

중공사형 정밀여과(MF)와 한외여과(UF)를 포함한 가압식 막여과 시스템은 높은 수준의 병원균 제거 효율로 인해 음용수 처리에 점점 더 많이 사용되고 있다. 그러나 가압식 막여과 시스템에서 분리막의 손상으로 인한 막완결성의 문제가 발생시 병원체가 유출될 수 있으므로, 효과적인 온라인 또는 오프라인 방식의 막 완결성 모니터링 방법을 통해 수질의 안정성을 보장하여야 한다. 최근 막 완결성 시험 중 하나 인 압력손실시험(pressure decay test, PDT)이 가압식 분리막 모듈을 이용한 음용수 처리 시설에 적용되고 있다. 이 논문에서는 PDT의 기체 주입방법에 따른 세 가지 조건으로 원수 측, 여과수 측, 원수 여과수 양방향 측 세 가지 조건을 선정 후 이에 따른 감지감도를 이론값과 실험값을 적용하여 비교하였다. 실험결과 가압되는 측의 부피와 감도는 반비례함을 확인하였고, 주입부의 반대방향에 부압을 형성 시에도 감도가 증가함을 확인할 수 있다. 즉 막 손상의 감지감도는 주입되는 부분의 체적이 작아질수록, 분리막을 경계로 유입과 여과 측의 압력차가 클수록 높아짐을 알 수 있었다.