• Journal of Physiology & Pathology in Korean Medicine
• /
• v.18 no.1
• /
• pp.84-92
• /
• 2004

The present study examined the effects of Taekunyukmijiwhang-tang (TV) on blood pressure and renal function in nitric oxide (NO)-dependent hypertensive rats. A phamacological inhibition of nitric oxide synthase (NOS) for 4-6 weeks produces renal vasoconstriction, renal dysfunction, and progressive severe hypertension. Treatment of rats with NG-Nitro-L-arginie methylester (L-NAME) (100 mg/L, 6 weeks), which is a nonspecific NOS inhibitor, cause a sustained increase in systolic blood pressure (SBP), along with the decrease in expression of ecNOS in the kidney and thoracic aorta. The expression of Na, K-ATPase α1 subunit in the kidney was also reduced in the L-NAME induced hypertensive rats group. The renal functional parameters including urine osmolality (Uosm), creatinine clearance (Ccr), which is an index of glomerular filtration (GFR) were decreased in rat with L-NAME induced hypertension. while solute-free water reabsoption (TcH₂O) was unchanged in all experimental group. However, the group combined treated with TV and L-NAME did not develop hypertension and expression of ecNOS in the aorta was restored. The expression of Na/sup +/, K/sup +/-ATpase α1 subunit in the kidney was markedly restored in L-NAME-induced hypertension rats by administration of TV along with the restoration of urinary volume (UV) and sodium excretion (UNaV), whlie Na/sup +/, K/sup +/-ATPase /β1 subunit was not altered. These results suggest that TV attenuates an increase in SSP in the L-NAME induced hypertension and restores partially renal function, which seems to be caused by up-regulation of expression of Na/sup +/, K/sup +/-ATPase α1 subunit in the kidney and ecNOS in thoracic aorta.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.19 no.1
• /
• pp.64-78
• /
• 2011

Surface of hydrophobic polyethylene membrane was modified to become hydrophilic by ion beam irradiation. Submerged membrane filtration reactors contained pristine membrane or surface-modified membrane and the influent to reactors was pickled radish wastewater. The objectives of this study was to investigate the variation of flux and pressure and the characteristics of pollutant removal such as organics, suspended solids and nutrients with time. The result of experiments using intermittent pristine membrane showed the occurrence of severe fouling by increasing permeate pressure rapidly in case of pickled radish wastewater but in synthetic wastewater, this phenomenon was not occurred. In experiments of variation flux after chemical cleaning and water cleaning in pristine membrane, chemical cleaning must be necessary for renewals of pollutant membrane. Performance of intermittent operation is higher than that of continuous operation. Reaching fouling time in the case of surface-modified membrane is 6 times as long as pristine membrane. According this reason, replacement expense of surface-modified membrane could be 1/6 of that of pristine membrane. Effluent from this process was relatively good water quality and performance in the removal efficiency of SS, nitrogen and phosphorus was particularly higher.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.17 no.2
• /
• pp.3-9
• /
• 2013

Purpose: Currently commercially available phantom can reproduce and evaluate only a static situation, the study is incomplete research on phantom and system which is can confirmed functional situation in the kidney by time through dynamic phantom and blood flow velocity, various difference according to the amount of radioactive. Therefore, through this study, it has produced the dynamic kidney phantom to reproduce images through the dynamic flow of the kidney, it desire to evaluate the usefulness of nuclear medicine imaging. Materials and Methods: The production of the kidney phantom was fabricated based on the normal adult kidney, in order to reproduce the dynamic situation based on the fabricated kidney phantom, in this study it was applied the volume pump that can adjust the speed of blood flow, so it can be integrated continuously radioactive isotopes in the kidney by using $^{99m}Tc-pertechnate$. Used the radioactive isotope was supplied through the two pump. It was confirmed the changes according to the infusion rate, radioactive isotopes and the different injection speeds on the left and right, analysis of the acquired images was done by drawn ten times ROI in order to check the reproducibility of each on the front and rear of the kidney and bladder. Results: Under the same conditions infusion rate 40 mL/min fixed to adjust the pressure of the pump when the radiopharmaceuticals between 2-3 minutes in the most integrated in the kidney phantom was excreted inthe bladder. Glomerular filtration rate (GFR), respectively, by each device SYMBIA 1,091 mL/min, FORTE 1,232 mL/min, ARGUS 1,264 mL/min, INFINIA 1,302 mL/min in that there isno statistically significant difference was found, Tmax values and T1/2 values stars from all equipment with no statistically significant difference was found. CV values of the coefficient of variation less than 5% was found to be repeatable, and to 2.67% of the lowest SYMBIA appeared, INFINIA was the highest in the 4.86%. Conclusion: Through this study, the results showed that the dynamic kidney phantom system is able to similarly reproduce renogram in the actual clinical. Especially, the depicted over time for the flow to be excreted through the kidney into the bladder was adequately reproduce, it is expected to be utilized as basic data to check the quality of the dynamic images. In addition, it is considered to help in the field of functional imaging and quality control.

• Particle and aerosol research
• /
• v.13 no.1
• /
• pp.11-16
• /
• 2017

Indoor air quality is of increasing concern because it is closely related human health. An air handling unit (AHU) can be used to control the indoor air quality related to particulate matters and $CO_2$ as well as air conditioning such as temperature and humidity of indoor air. An electrostatic precipitator has a high collection efficiency and low pressure drop, however, ozone can possibly generate from its chargers, which is one of drawbacks to apply it for indoor air control. Here we compared four charging electrodes such as a $50{\mu}m$ tungsten wire, a $100{\mu}m$ tungsten wire, a $16{\mu}m$-thickness Al foil and a carbon fabric comprised of $5-10{\mu}m$ fibers. The carbon fabric electrode showed a superior particle collection efficiency and a lower ozone generation at a given power consumption compared to tungsten wires of 50, $100{\mu}m$ and an Al foil electrode. This low ozone generating, micro-sized electrode can be applied to the electrostatic precipitator in AHU for indoor air control.

• Journal of Preventive Medicine and Public Health
• /
• v.49 no.2
• /
• pp.108-117
• /
• 2016

Objectives: Smoking is known to be associated with nephropathy in patients with diabetes. The distinct effects of smoking before and after diabetes has been diagnosed, however, are not well characterized. We evaluated the association of cigarette smoking before and after a diagnosis of diabetes with the presence of diabetic nephropathy. Methods: We analyzed data from the 2011-2013 editions of the Korea National Health and Nutrition Examination Survey. A total of 629 male patients diagnosed with diabetes were classified as non-smokers (90 patients), former smokers (225 patients), or continuing smokers (314 patients). A "former smoker" was a patient who smoked only before receiving his diagnosis of diabetes. A "continuing smoker" was a patient who smoked at any time after his diabetes had been diagnosed. Diabetic nephropathy was defined as the presence of albuminuria (spot urine albumin/creatinine ratio ${\geq}30mg/g$) or low estimated glomerular filtration rate ($<60mL/min/1.73m^2$). Multiple logistic regression models were used to assess the independent association after adjusting for age, duration of diabetes, hemoglobin A1c, body mass index, systolic blood pressure, medication for hypertension, and medication for dyslipidemia. Female patients were excluded from the study due to the small proportion of females in the survey who smoked. Results: Compared to non-smokers, continuing smokers had significantly higher odds ratio ([OR], 2.17; 95% confidence interval [CI], 1.23 to 3.83) of suffering from diabetic nephropathy. The corresponding OR (95% CI) for former smokers was 1.26 (0.70 to 2.29). Conclusions: Smoking after diagnosis of diabetes is significantly associated with the presence of diabetic nephropathy in the Korean male population.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.20 no.3
• /
• pp.21-24
• /
• 2012

In this study, Anaerobic Membrane Bioreactor(AnMBR) treating food waste leachate was operated to investigate treatment efficiency of anaerobic process, operational parameters and production of biogas. AnMBR was operated under the condition of filtration type of inside-out mode. AnMBR was operated under the condition that range of permeate flux was from 15 to 20 LMH and range of transmembrane pressure was from 1 to $3 kgf/cm^2$. It was not good that AnMBR was performed under direct connection between anaerobic reactor and external UF module. so, this connection method changed to indirect connection using buffer tank was placed between anaerobic reactor and UF external module. TCOD and SCOD values were that influent were about 113 g/L, 62 g/L and effluent were 25 g/L, 12 g/L, respectively. also TCOD and SCOD removal efficiency were 77% and 81%, respectively. but after added UF process, COD and SCOD removal efficiency was increased to 93% and 86%, respectively.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.12
• /
• pp.1857-1863
• /
• 2010

We present the fabrication and characterization of transparent carbon nanotube film (CNF) piezoresistors. CNFs were fabricated by vacuum filtration methods with 65?92% transmittance and patterned on Au-deposited silicon wafer by photolithography and dry etching. The patterned CNFs were transferred onto poly-dimethysiloxane (PDMS) using the weak adhesion property between the silicon wafer and the Au layer. The transferred CNFs were confirmed to be piezoresistors using the equation of concentrated-force-derived resistance change. The gauge factor of the CNFs was measured to range from 10 to 20 as the resistance of the CNFs increased with applied pressure. In polymer microelectromechanical systems, CNF piezoresistors are the promising materials because of their high sensitivity and low-temperature process.

• The Korean Journal of Pharmacology
• /
• v.12 no.2 s.20
• /
• pp.43-49
• /
• 1976

The facts that $PGE_2$ produced diuresis in the rabbit when given into a lateral ventricle of the brain and that $PGF_{2{\alpha}}$ is abundantly found in the brain prompted us to investigate the effects of $PGF_{2{\alpha}}$ introduced directly into the ventricle on the renal function. $PGF_{2{\alpha}}$ given intraventriculary in doses of $10{\mu}g\;and\;100{\mu}g$ elicited prompt diuresis, 10-fold increase of sodium excretion and two-fold increment of potassium excretion. Free water reabsorption also increased along with the increased osmolar clearance. Neither renal plasma flow nor glomerular filtration rate did change significantly. This, along with the fact that the percentage of reabsorbed sodium filtered decreased from 99.5 to 93.9, indicates the tubular site of the diuretic and natriuretic action. Atropine pretreatment did not influence the renal effects of intraventricular $PGF_{2{\alpha}}$. Intravenously administered $PGF_{2{\alpha}}$ in doses of 30 to $100{\mu}g$ did not produce any significant change in renal function. Intraventricular $PGF_{2{\alpha}}$ had no effect on the systemic blood pressure, whereas intravenous administration brought about a transient hypotension. These observations suggest that $PGF_{2{\alpha}}$ induces diuresis and natriuresis via central mechanism, that the site of the action resides in renal tubules, and that the reabsorption of sodium is inhibited in the proximal tubule, possibly through mediation of certain humoral agent. Overall, it is suggested that $PGF_{2{\alpha}}$ might play a roll in regulating renal function through the center.

• Membrane and Water Treatment
• /
• v.11 no.2
• /
• pp.97-109
• /
• 2020

Membrane fouling is the main drawback of membrane technology. Frequent membrane cleaning and membrane replacement are, therefore, required to reduce membrane fouling that causes permeate flux reduction, lower rejection, or higher operating pressure. Studies have proved that the alteration of membrane properties is the key controlling factor in lessening membrane fouling. Among stimuli-responsive membranes, thermo-responsive membrane is the most popular, with a drastic phase transition and swelling-shrinking behavior caused by the temperature change. In this study, the thermo-responsive ability of two commercial membranes, PolyCera® Titan membrane and PolyCera® Hydro membrane, at different temperatures was studied on the antifouling function of the membrane in palm oil mill effluent (POME) treatment. The evaluation of the membrane's thermo-responsive ability was done through three cycles of adsorption (fouling) and desorption (defouling) processes in a membrane filtration process. The experimental result depicted that PolyCera® Hydro membrane had a higher membrane permeability of 67.869 L/㎡.h.bar than PolyCera® Titan membrane at 46.011 L/㎡.h.bar. However, the high membrane permeability of PolyCera® Hydro membrane was compensated with low removal efficiency. PolyCera® Titan membrane with a smaller mean pore size had better rejection performance than PolyCera® Hydro membrane for all tested parameters. On the other hand, PolyCera® Titan membrane had a better hydrodynamic cleaning efficiency than PolyCera® Hydro membrane regardless of the hydrodynamic cleaning temperature. The best hydrodynamic cleaning performed by PolyCera® Titan membrane was at 35℃ with the flux recovery ratio (FRR) of 99.17 ± 1.43%. The excellent thermo-responsive properties of the PolyCera® Titan membrane could eventually reduce the frequency of membrane replacement and lessen the use of chemicals for membrane cleaning. This outstanding exploration helps to provide a solution to the chemical industry and membrane technology bottleneck, which is the membrane fouling, thus reducing the operating cost incurred by the membrane fouling.

• Journal of Powder Materials
• /
• v.16 no.1
• /
• pp.22-27
• /
• 2009

To improve the filtration efficiency of porous materials used in filters, an extensive specific surface area is required to serve as a site for adsorption of impurities. In this paper, a method for creating a hybridized porous alloy using a powder metallurgical technique to build macropores in an Al-4 wt.% Cu alloy and subsequent surface modification for a microporous surface with a considerably increased specific surface area is suggested. The macropore structure was controlled by granulation, compacting pressure, and sintering; the micropore structure was obtained by a surface modification using a dilute NaOH solution. The specific surface area of surface-modified specimen increased about 10 times compare to as-sintered specimen that comprised of the macropore structure. Also, the surface-modified specimens showed a remarkable increase in micropores larger than 10 nm. Such a hybridized porous structure has potential for application in water and air purification filters, as well as membrane pre-treatment and catalysis.