• Journal of Korean Elementary Science Education
• /
• v.37 no.2
• /
• pp.147-160
• /
• 2018

The purpose of this study is to compare the elementary science curriculum and textbooks of Korea, the United States, Japan, and Singapore to know how the contents on particulate concept of matter is introduced and expressed. In Korea, particulate concept of matter was adopted as a term for 'molecules' in the 3rd through 6th curriculum, and the term for 'particles' was adopted in the 2009 revised curriculum. In the United States, NGSS adopted the term 'particle' in fifth grade. Japan presented the concept of 'particle' as a core concept of matter in the commentary, and the expressions 'particles' were being introduced in the textbooks. But it did not cover particulate nature of matter at the elementary school level in Singapore. An analysis of elementary textbooks in Korea, the United States and Japan except Singapore showed particulate expressions in 'dissolution', 'state change of water', 'gas pressure and volume', 'combustion and extinguishment' units. Korean textbook was only being introduced in 'dissolution' and 'gas pressure and volume', but in the textbooks of Japan and the United States, water was expressed as particles in 'state change of water' unit. Discussion and implication on the introduction of particulate concept to elementary science curriculum and textbooks were suggested based on the results.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.12 no.1
• /
• pp.41-48
• /
• 2016

To investigate the effect of long-term thermal aging on the microstructural and mechanical characteristics of weldment made of nickel base alloy and its weld metal, an accelerated heat treatment was applied to simulate the process of long-term thermal aging in the operating condition of nuclear power plant. A representative nickel-based weldment with Alloy 600 and Alloy 182 was fabricated and heat-treated at $400^{\circ}C$ for 1,713 h and 3,427 h to simulate the thermal aging for the period equivalent to 15 and 30 years in operating pressurized water reactors, respectively. The microstructural and mechanical characteristics were analyzed by using optical microscopy, scanning electron microscopy and Vickers microhardness measurement. Changes were observed in precipitation behavior and microhardness of each specimen, and these changes were mainly attributed to the change in precipitated morphology and residual stress across the weld during the thermal aging process.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.137-144
• /
• 2005

Recently a pressurized grouting soil nail is demanded due to problems beyond of economical and engineering purpose. In this study, a newly modified soil nailing technology named as the PGSN (Pressurized Grouting Soil Nailing) system is respected to reduced displacements of nails and increase of global slope stability. And effects of various factors related to the design of the PGSN system, such as the length of the soil nail, injected pressure and W/C ratio of cement grout in the pressurized grouting soil nail are examined throughout a series of the displacement-controlled field pull-out tests. Displacement-controlled field pull-out tests are performed in the present study and the volume of grouting are also evaluated based on the measurements. In addition, both short-term and long-term characteristics of pull-out deformations of the newly proposed PGSN system are analyzed and compared with those of the general soil nailing system by carrying out the stress-controlled field pull-out tests. From the pull-out characteristics of pressurized grouting soil nails, it is found that the effect of the length of the soil nail, injected pressure and W/C ratio of cement grout are important parameters.

• Ocean Systems Engineering
• /
• v.12 no.1
• /
• pp.63-86
• /
• 2022

A refined projection-based purely Lagrangian meshfree method is presented towards reliable numerical analysis of fluid flow interactions with saturated/unsaturated porous media of uniform/spatially-varying porosities. The governing equations are reformulated on the basis of two-phase mixture theory with incorporation of volume fraction. These principal equations of mixture are discretized in the context of Incompressible SPH (Smoothed Particle Hydrodynamics) method. Associated with the consideration of governing equations of mixture, a new term arises in the source term of PPE (Poisson Pressure Equation), resulting in modified source term. The linear and nonlinear force terms are included in momentum equation to represent the resistance from porous media. Volume increase of fluid particles are taken into consideration on account of the presence of porous media, and hence multi-resolution ISPH framework is also incorporated. The stability and accuracy of the proposed method are thoroughly examined by reproducing several numerical examples including the interactions between fluid flow and saturated/unsaturated porous media of uniform/spatially-varying porosities. The method shows continuous pressure field, smooth variations of particle volumes and regular distributions of particles at the interface between fluid and porous media.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.2
• /
• pp.221-231
• /
• 2014

TIn this paper, The need for a long-term sustainable Green IT strategy to pursue strategic partnerships and alliance was proposed. We made a research model to identify how social pressure, environmental orientation and environmental attractiveness affect into the Green IT strategy, and how Green IT strategy affects on Green IT company's environmental performance. In previous studies, the long-term persistence was used as the dependent variables, but in this paper it was used as a parameter variable. A survey of Green IT companies and a empirical analysis by statistical software package were conducted. It was verified that the mediating effect is between the social pressure, environmental orientation, environmental attractiveness and environmental performance by the long-term persistence.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.12
• /
• pp.27-35
• /
• 2010

The structures built under the groundwater level are affected by the buoyancy force, which is hydrostatic pressure in the up direction. Recently, buoyancy-resistant anchor method has been applied in many cases of the construction of the important structure of large size, which is built under the groundwater level so that it takes high uplift pressure. Even if the construction cost of the method is very high, it surely increases the safety rate. However, the diagnosis of the performance of the buoyancy-resistant permanent anchor and the investigation of resistance mechanism are still insufficient. Especially, the long-term behavior of the anchor has not been studied well due to the difficulty in observation procedure. The contribution of this paper is the establishment of reasonable design methodology. We have measured anchor axial forces for 10 years after the construction, by using an automated measurement and a manual measurement by establishing a load cell in anchor head. Through the data collected from the measurements, we analyze the construction-step behavior of the anchor according to the self-weight variation of the building and the long-term behavior (i.e. movement within 10 years after the construction) of the anchor according to the passage of time.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05e
• /
• pp.73-76
• /
• 2003

This paper describes the information for quantitative simulation of weakly ionized plasma. In previous paper, we calculated the electron transport coefficients in pure Xenon gas by using two-term approximation of Boltzmann equation. Therefore, in this paper, we calculated the electron transport coefficients(W, $N{\cdot}D_L$ and $D_{L/{\mu}}$) in pure Xenon gas for range of E/N values from 0.01 ~ 500[Td] at the temperature was 300[K] and pressure was 1[Torr] by using multi-term approximation of the Boltzmann equation by Robson and Ness, The results of two-term and multi-term approximation of the Boltzmann equation has been compared with the experimental data by L. S. Frost and A. V. Phelps for a range of E/N.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.11
• /
• pp.1252-1257
• /
• 2004

This paper describes the information for quantitative simulation of weakly ionized plasma. In previous paper, we calculated the electron transport coefficients by using two-term approximation of Boltzmann equation. But there is difference between the result of the two-term approximation of the Boltzmann equation and experiments in pure CF$_4$ molecular gas and in CF$_4$+Ar gas mixture. Therefore, In this paper, we calculated the electron drift velocity (W) in pure CF$_4$ molecular gas and CF$_4$+Ar gas mixture (1 %, 5 %, 10 %) for range of E/N values from 0.17～300 Td at the temperature was 300 K and pressure was 1 Torr by multi-term approximation of the Boltzmann equation by Robson and Ness. The results of two-term and multi-term approximation of the Boltzmann equation have been compared with each other for a range of E/N.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.248-251
• /
• 2002

We measured the electron drift velocity, W, in 0.5% $SF_{6}$-Ar mixture over the E/N range from 30 Td to 300 Td and gas pressure range from 0.1 to 8 Torr by the double shutter drift tube with a variable drift distance. This coefficient in the mixture was calculated over the same E/N and gas pressure range by using the two-term approximation of the Boltzmann equation. And the measured and calculated values at different gas number density at each E/N was appreciable dependence in the results on the gas number density,

• 한국전산유체공학회:학술대회논문집
• /
• 1995.10a
• /
• pp.169-174
• /
• 1995

A finite element scheme using the concept of PISO method has been developed to solve the viscous flow problems in all speed range. In this study, new pressure equation is proposed such that both the hyperbolic term related with the density variations and elliptic term reflecting the incompressibility constraint are included. Present method has been applied to incompressible flow in two-dimensional driven cavity(Re=100, 400 and 1,000), and its computed results are compared with other's. Also, Carter plate problem(M=3 and Re=1,000) is computed and the comparison is made with Carter's results. Finally, we simulate a shock-boundary layer interaction problem(M=2 and $Re=2.96{\times}10^5$) to illustrate the shock capturing capability of the present solution algorithm.