• Korean Chemical Engineering Research
• /
• 제58권2호
• /
• pp.176-183
• /
• 2020

이 연구에서는 작은 유기 분자 말단의 하이드록실기와 전이 금속 사이의 배위 결합을 통해 고분자와 유사하게 연결된 복합체를 제작하고, 점착 부여제를 추가하여 해당 물질의 점착제로의 사용 가능성을 확인하였다. 점착제 합성에 사용한 타닌산(tannic acid, TA)은 하이드록실기를 풍부하게 보유하고 있어 전이 금속과는 배위 결합이 가능하고 친수성 고분자와는 수소 결합이 가능하다. 위의 성질을 이용하여 타닌산과 전이 금속, 고분자 세 가지 성분을 한 번에 간단히 섞어 기판에 잘 펴지며 점착 능력을 보유한 특별한 유변 물성을 가지는 물질을 제작하였다. 합성에 사용한 전이 금속의 종류(Fe³⁺, Ti⁴⁺), 고분자의 종류, 처리 조건 등에 따른 유변 물성의 변화를 확인하는 과정을 통해 점착제로 사용하기에 가장 적합한 성분의 조합을 발견하였으며, 인체에 무해하며 높은 응집력과 접착력을 보유한 다목적 점착제로의 사용 가능성을 확인하였다.

• 접착 및 계면
• /
• 제17권3호
• /
• pp.89-95
• /
• 2016

유연한 식품포장필름에 사용되고 있는 드라이 라미네이션용 유성접착제를 대체하기 위해, 고분자 분산제를 사용하여 유화하는 방법으로 수성 감압점착제를 친환경적으로 설계하였다. 유화중합에서 널리 사용하는 저분자량의 계면활성제는 물성의 변수로 작용해 왔다. 본 연구에서는 먼저 용액중합으로 polymeric nano-dispersant (PND)를 제조하고, 이 PND 입자들의 분산제를 micelle seed로 이용하여 core-shell grafted acrylic 점착제를 합성하였다. 이때 입자의 바깥층(shell)과 입자내층(core)의 $T_g$를 달리하여 얇은 필름의 점착조건인 초기접착력과 유지력의 균형을 이루도록 설계하였다. 최적화된 시험군 합성 점착제의 물성을 국내외 제조사에서 개발된 연구시료들과 비교분석하여, 점착제로서의 물성을 검토하였다. 물성 비교 결과, 본 연구에서 설계 합성한 저분자량의 계면활성제를 대체 사용한 고분자 나노분산제 기반 core-shell 점착제가 연포장에 적합한 점착물성을 나타냄을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.127-128
• /
• 2005

UV-curable pressure sensitive adhesives were prepared by blending acrylic copolymer, copolymerized with butyl acrylate (BA), acrylic acid (AA) and vinyl acetate (VAc) by solution polymerization, triethyl amine (TEA) and trimethylolpropane triacrylate (TMPTA). The PSAs were evaluated by peel strength with varying contents of TMPTA and UV dose, and also glass transition temperature($T_g$) of PSAs were measured. When exposed on UV irradiation, the PSAs showed the decreased peel strength and increased $T_g$. And following UV irradiation, the PSAs did not leave any residue on wafer after peel off PSA.

• Journal of Pharmaceutical Investigation
• /
• 제40권1호
• /
• pp.33-38
• /
• 2010

Sibutramine is a serotonin-norepinephrine reuptake inhibitor indicated for the management of obesity in conjunction with a reduced calorie diet. The oral administration of sibutramine is followed by its dose-related side effects. In this study, sibutramine was formulated into drug in adhesive (DIA) patches in an attempt to overcome these problems. The effects of different formulation variables including pressure-sensitive adhesive (PSA), loading amount of drug, thickness of matrix and enhancer on the skin permeation of the drug were evaluated using excised hairless mouse skin. In the acrylic adhesive with carboxyl functional group, low release of sibutramine was observed due to the strong interaction between carboxyl group of adhesive and amine group of sibutramine. The acrylic adhesive without functional group provided good adhesion force and allowed high drug loading. Changing drug load as well as thickness of the matrix was found to alter permeation rate. $Crovol^{(R)}$ PK40 and $Crovol^{(R)}$ A40, were found to be effective enhancers for sibutramine. The optimized patch contained 20% sibutramine, and 5% $Crovol^{(R)}$ A40 as permeation enhancer, in $80\;{\mu}m$ thick Duro-$Tak^{(R)}$ 87-9301 matrix.

• Journal of Pharmaceutical Investigation
• /
• 제34권3호
• /
• pp.193-199
• /
• 2004

The decreasing effect of wrinkle on the pressure sensitive adhesive hydrogel patches containing ulmi cortex extract and sorbitol as the drug for anti-wrinkle were investigated. In this study, hydrogels were prepared by the crosslinking reaction of acrylic polymers and aluminum ions produced by L(+)-tartaric acid hydrolysis of the dihydroxy aluminum aminoacetates. The inhibition concentration of ulmi cortex extract on the collagenase exhibited at 0.01%. Furthermore, the moisturizing effect of hydrogel patches formulated with sorbitol was higher than that without it. In vivo animal test in hairless mouse showed that the ulmi cortex-loaded hydrogel patches had about 31.2% of anti-wrinkle effect compared to blank (before attaching the patches). Human test showed that only 33% of subjects showed the decreasing of wrinkle during 8 weeks. In conclusion, the model pressure sensitive adhesive hydrogel patches in this study would be pharmaceutically applicable for the wrinkle treatment on the facial skin.

• Archives of Pharmacal Research
• /
• 제26권8호
• /
• pp.644-648
• /
• 2003

To investigate the feasibility of developing a new ondansetron transdermal system, the effects of vehicles and penetration enhancers on the in vitro permeation of ondansetron hydrochloride (OS) from a pressure-sensitive adhesive (PSA) matrices across dorsal hairless mouse skin were studied. Vehicles employed in this study consisted of various ratios of propylene glycol monocaprylate (PGMC)-diethylene glycol monoethyl ether (DGME) co-solvents and PGMC-propylene glycol (PG) co-solvents with 3% oleic acid. $Duro-Tak^\circledR$ 87-2100 and $Duro-Tak^\circledR$ 87-2196 were used as PSAs. The concentration of DGME in PGMC-DGME co-solvent system affected the release rate; as the concentration of DGME increased, the release rate decreased. The cumulative release amount of OS increased as the ratio of PSA to drug solution decreased. The permeation flux was also primarily affected by the amount of PSAs; as the amount decreased, the permeation flux increased. The overall fluxes from matrix formulations were significantly lower when compared to those obtained from solution formulations. The ratio of PG to PGMC did not affect permeation flux, while the lag time decreased significantly from $5.14\pm3.31 to 0.31\pm0.12$ h as the PG increased from 40% to 60%.

• 한국응용과학기술학회지
• /
• 제25권4호
• /
• pp.525-532
• /
• 2008

To prepare a solution type acrylic pressure-sensitive adhesive, quarter polymers were synthesized from butyl acrylate(BA), 2-ethylhexylacrylate(2-EHA) as a base monomer, methyl methacrylate(MMA) as a comonomer, each of methacrylic acid(MAA), acrylic acid(AA) as a functional monomer. Acrylic solution type pressure-sensitive adhesives(PSA's) of isocyanate derivative crosslinking PSA's were prepared by crosslinking of BEMM, BEMA with toluene-2,4-diisocyanate. The structure of adhesive was identified by FT-IR. The viscosity was measured by using Brookfield DV-III and molecular weight was measured by using gel permeation chromatography. The physical properties of polyethylene film coated with BEMMT, BEMAT were measured as a function of the concentration. As the result, BEMMT(0.6, 0.8), BEMAT(0.6) showed peel adhesion of $160{\sim}180\;g_f$/25 mm width and shear adhesion of more than 24 hours, and tackiness of $4/32{\sim}6/32$ which was relevant to commercial usage.

• 공업화학
• /
• 제3권4호
• /
• pp.678-685
• /
• 1992

기능성 단량체가 점착물성에 미치는 영향을 알아보기 위하여 아크릴산과 기타 단량체로 아크릴 수지를 라디칼 용액중합을 이용하여 4원공중합시킨 후 물성을 측정하였으며, 또한 최적 점착 물성을 얻기 위하여 통계적 분석 방법을 이용하여 검토하였다. 점착물성에 있어서 아크릴산이 아크릴아미드보다 점착력의 증가에 미치는 영향이 컸다. 반면에 tackiness의 감소에 있어서는 아크릴아미드의 영향이 아크릴산 보다 컸다. 통계적 방법을 인용하여 점착물성 중 점착력, tackiness 그리고 응집력을 최적화 시킨 결과 단량체의 성분 비율은 부틸 아크릴레이트 81.7 mole%, 아크릴산 8.0 mole%, 아크릴아미드 2.1 mole%, 비닐아세테이트 8.2 mole% 일 때로 나타났고 이 때의 추정 회귀식은 다음과 같았다. $D=.857+.072X_1-.114X_2-.027X_3-.126X_1{^2}-.046X_1{\cdot}X_2-.063X_1{\cdot}X_3-.152X_2{^2}+.027X2{\cdot}X_3-.120X_3{^2}$ $X_1$:coded acylic acid, $X_2$:coded acylamide, $X_3$:coded vinylacetate

• 접착 및 계면
• /
• 제2권1호
• /
• pp.31-43
• /
• 2001

• 한국유변학회:학술대회논문집
• /
• 한국유변학회 2001년도 춘계 학술발표회 논문집
• /
• pp.77-80
• /
• 2001