• Wind and Structures
• /
• v.11 no.6
• /
• pp.479-496
• /
• 2008

In this paper, computer simulation of wind flow around a single cooling tower with louver support at the base in the KAZERUN power station in south part of IRAN is presented as a case study. ANSYS FLOTRAN, an unstructured finite element incompressible flow solver, is used for numerical investigation of wind induced pressure load on a single cooling tower. Since the effects of the wind ribs on external surface of the cooling tower shell which plays important role in formation of turbulent flow field, an innovative relation is introduced for modeling the effects of wind ribs on computation of wind pressure on cooling tower's shell. The introduced relation which follows the concept of equivalent sand roughness for the wall function is used in conjunction with two equations ${\kappa}-{\varepsilon}$ turbulent model. In this work, the effects of variation in the height/spacing ratio of external wind ribs are numerically investigated. Conclusions are made by comparison between computed pressure loads on external surface of cooling tower and the VGB (German guideline for cooling tower design) suggestions.

• Journal of Navigation and Port Research
• /
• v.32 no.4
• /
• pp.271-277
• /
• 2008

When performing steering by an autopilot (automatic steering gear), a sensitivity adjustment is mainly determined by P value and D value. These values differ in the optimal combination by model of ship and external forces. This research was carried out simulation case studies and examined movement of Pure Car Carrier, which easily received ship by wind pressure influence in low speed We investigated the relation of horizontal migration(transfer) of ship's body and P-D value. Based on it, four parameters of P-D at approaching berth could be suggested Hence there were suggestions of parameters; Distance to maximum lee point, Time to maximum lee point, Time to return to original course and Time to 300th second. The correlation of these parameters and P-D value were also considered. As a result, we think that this index, like formulated P-D, leads to an easy and safe navigation by utilizing these indices.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.6
• /
• pp.135-142
• /
• 2016

We proposed the new method to estimate the blood pressure with the differential value of the digital arterial pulse waveform and BP relation equation. To get the digital arterial pulse waveform, we use the arterial pulse waveform measurement system that has digital air-pressure sensor device and smart phone. The acquired digital arterial pulse waveforms are classified as hypertension group, normal group, and hypotension group, and we can derive the average differential value between the highest point and lowest point of a single waveform of individuals along with the group. In this study, we found the functional correlation between the blood pressure and differential value as a form of BP relation equation through the regression process on the average of differential value and blood pressure value from a tonometer. The Experimental results show the BP relation equation can give easy blood pressure estimation method with a high accuracy. Although this estimation method has over 66 % error rate and does not give the high level of the accuracy for the diastolic compares to the commercial tonometer, the estimation results for the systolic show the high accuracy that has less than 10 % error rate.

• The Korean Journal of Physiology
• /
• v.8 no.2
• /
• pp.19-31
• /
• 1974

In oder to study the correlation between daily urinary output of sodium chloride and blood pressure, twenty four hour urine samples were collected from 224 cases (70 male and 154 female) of healthy Koreans whose age varied from 18 to 70 years old. The volume and concentration of sodium, chloride and potassium and total nitrogen were measured, along with the resting blood pressure. Results obtained are summarized as follows; 1. Daily urinary output was increased as a function of age. However, daily urinary output per unit sulface area was maintained at approximately 800 to 900 $ml/m^2$ in all age groups of male and it increased as a function of age in female groups. There was no significant difference between male and female. 2. The daily urinary sodium concentration was decreased gradually acceding to age in both sexes. Daily excretion of sodium was constant regardless of age in both sexes but especially high in 25-39 year female age group, which was slightly greater in males than in females. 3. The daily urinary chloride concentration was at approximately 250 meq/L in all age groups of male and which decreased as a function of age in females. 4. Hence the daily urinary output of sodium chloride was constant in all age groups of males which increased as a function of age in female groups. However, daily excretion of sodium chloride per unit sulface area was maintained at approximately 11 $gm/m^2$ in males and which increased as a function of age in females. 5. The daily urinary excretion of potassium was constant regardless of age in both sexes. 6. Urinary K/Na ratio was maintained at approximately 0.27 in males and 0.33 in females. 7. The daily urinary output of total nitrogen amount was approximately $8{\sim}10$ gm in males and $7{\sim}9$ gm in females. However, daily urinary output of nitrogen per unit sulface area was constant regardless of age in both sexes. 8. The systolic blood pressure was increased gradually according to the age in both sexes and was higher for males than females under 40 years of age. However, there was no significant difference between both sexes in ages over 40 years. 9. Quantitative comparisons indicated that daily urinary output and sodium chloride excretion are higher while daily potassium output, nitrogen excretion and urinary K/Na ratio are significantly lower among Koreans than a among Occidentals. These findings suggest that average Koreans live on low-protein and high-salt diet throughout their livers. Statistical result obtained may he summarized as follows; 10. The relation between blood pressure and sodium concentration of urine. The correlation between systolic blood pressure and sodium concentration was negatively associated for both sexes and the correlation coefficient was significant for females $({\gamma}_1=-.19<-{\gamma}_{152},\;_{0.05}=-0.159)$ and it was not significant for males $({\gamma}_1=-.19>-{\gamma}_{68},\;_{0.05}=-0.232)$ tut may be due to the sample size for males. The correlation between diastolic blood Pressure and sodium concentration was negatively associated for both sexes and the correlation coefficient was significant for males $({\gamma}_1=-.37<-{\gamma}_{68},\;0.05=-0.232)$ and the relation was not significant for females $({\gamma}_1=-.11>-{\gamma}_{152},\;_{0.05}=-0.159)$. 11. The relation between blood pressure and daily urinary sodium chloride excretion. The association between systolic blood pressure and sodium chloride excretion was positively correlated for both sexes and the relation was significant for females $({\gamma}_1=.20>{\gamma}_{152},\;_{0.05}= 0.159)$ and it was insignificant for males $({\gamma}_1=.09<{\gamma}_{68},\;_{0.05}=0.232)$, The relation between diastolic blood pressure and sodium chloride excretion was positively associated and insignificant for both sexes males $({\gamma}_1=.17<{\gamma}_{68},\;_{0.05}=0.232)$ and females $({\gamma}_1=.09<{\gamma}_{152},\;_{0.05}=0. 159)$. 12. The relation between daily urinary nitrogen excretion and sodium chloride excretion. The association between daily nitrogen excretion and sodium chloride excretion was positively significant for both sexes, males $({\gamma}_1=.31>{\gamma}\;_{68},\;_{0.05}=0.232)$ and females $({\gamma}_1=.36>{\gamma}_{-152},\;_{0.05}=0.159)$.

• Journal of the Korean Geophysical Society
• /
• v.6 no.2
• /
• pp.49-56
• /
• 2003

Under the attack of storm waves, there are many destructions of coastal structures in the forms of sinking and sliding. There types of destructions will be in close relation to the dynamic behavior of sand bed around the structures. Form this point of view, in this pear, we investigate the characteristics of the pore water pressure and effective stresses in the highly saturated sand bed under oscillating water pressure theoretically. The results indicate that the oscillating water pressure induce the notable drop of strength of and bed around the structure under certain condition.

• Journal of Korean Society for Quality Management
• /
• v.43 no.3
• /
• pp.299-312
• /
• 2015

Purpose: This paper analyzes the phenomenon on the degradation of the electrical performance by the pressure in the manufacturing process of sandwich type radomes. Methods: This paper consists of two steps to analyze the relation between the electrical performance and the pressure. First, the thickness of the core of the flat panels which were fabricated with different pressure was measured with the microscope, and then the electrical performance of the flat panels was analyzed with simulation and experiment. Based on the results of the electrical performance and the measured thickness with respect to the flat panels, the relation between the electrical performance and the applied pressure in the manufacturing process was analyzed. Results: The simulated and measured results with respect to the flat panel shows that the high pressure results in the nonuniform thickness of the core, which is applied to the radome fabrication. As a result, the degradation of the electrical performance occurs because the unintended scattered field is generated as the electromagnetic wave transmits (or impinges upon) the radome. Furthermore, we observed that the electrical performance of both the flat panel and the radome got worse as the high pressure was applied. Conclusion: Through simulation and experiment, therefore, it is demonstrated that for the high pressure in the manufacturing process the nonuniform thickness of the core increases and results in the degradation of the electrical performance of the radome.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.3
• /
• pp.72-78
• /
• 2007

A diesel particulate filter causes progressive increase in back pressure of an exhaust system due to the loading of soot particles. To maintain the pressure drop caused by DPF under proper level, a regeneration process is mandatory when excessive loading of soot is detected in the filter. It is a major reason why the relation between the amount of soot and the pressure drop in a DPF becomes crucial. On the other hand, pressure drop varies with not only the soot loading but also conditions of exhaust gas such as mass flow rate. Therefore, the relation among them becomes complicated. Furthermore, the characteristics of heat transfer in a DPF is another crucial parameter in order for the filter to avoid thermal crack during regeneration period. This study presents characteristics of pressure drop under various conditions of soot loading and mass flow rate in catalyzed diesel particulate filter. This study also shows characteristics of heat transfer in DPF when high temperature gas flows into the filter. Experiments reveal that the soot loading and mass flow rate affect characteristics pressure drop independently. Experiments also indicate that the amount of coating material has little influence on pressure drop with changes in soot loading and mass flow rate. However, increased catalyst coating may lead to the improved heat transfer which is efficiency to reduce thermal stress of the filter.

• Journal of Nutrition and Health
• /
• v.19 no.6
• /
• pp.382-391
• /
• 1986

This survey was carried out to study the relationship between observable factor such as anthropometry, blood pressure, food habit, the score of THI and diseases of 459 persons (male: 188, female: 271) aged 60 and over in the rural area of Kurye - Gun Chonnam from April 28 to May 1, 1986. The results obtained were as follo\ulcornerws 1) Body weight and height was below Korean average. The mean obesity rate in male and female showed -2.3% and 3.4%, respectively, and BMI showed 25.8 and 26.0 respectively. 2) The systolic and diastolic blood pressure was normal in both sexes. The pro opotion of hypertension by WHO level showed 19.6% and 20.3% in male and fem\ulcornerale, respectively_ The proportion of anemia showed 57.9% and 41.7% in male and female, respectively. The concentration of total protein, albumin, cholesterol and gl\ulcornerucose and white blood cell number showed normal range in both sexes. 3) The proportion of the disease showed 68% of male and 83% of female and among them 50% of male and 43% of female suffered from one kind of disease and there are more female who suffered from many kinds of diseases than male. The most common disease is neuralgia and nexts are digestive diseases, diabetes melli\ulcornertus, urinary disturbance, motion disturbance, arthritis, respiratory diseases, tubecu\ulcornerlosis and hepatitis. 4) There was a significant correlation between body height and weight and the score of food habit. 5) There was a considerable relation between the score of each item of TIll and the status of diseases. 6) There appeared profound relation between obesity rate and the data of anth\ulcornerropometry, but weak relation between that and blood constituents, and no relation between that and the score of food habit.

• Aerospace Engineering and Technology
• /
• v.6 no.2
• /
• pp.126-133
• /
• 2007

An experimental apparatus has been designed and prepared in order to measure a pressure loss coefficient of hydropneumatic components, which is an important parameter in a hydropneumatic system Blow-down system has been adopted for the experimental apparatu to meet the high flow energy requirement as well as the apparatus safety. Especially, pressure loss coefficient measurements of pyrostarter filters have been performed and the pressure loss coefficient, K of CQSF has been experimentally acquired. Then it is shown that the turbine inlet pressure $p_2$, which is predicted from the measured K, is in accord with the results of combustion tests. Moreover, the relation between K and combustion pressure $p_0$ has been presented and it is disclosed that the relation accords well with the results of combustion tests. It is anticipated that K of a filter could play a role in PS size reduction by rising up the combustion pressure resulting in increasing the burning rate of solid propellant.

• Journal of Astronomy and Space Sciences
• /
• v.38 no.4
• /
• pp.237-250
• /
• 2021

A rover is a planetary surface exploration device designed to move across the ground on a planet or a planetary-like body. Exploration rovers are increasingly becoming a vital part of the search for scientific evidence and discoveries on a planetary satellite of the Sun, such as the Moon or Mars. Reliable behavior and predictable locomotion of a rover is important. Understanding soil behavior and its interaction with rover wheels-the terramechanics-is of great importance in rover exploration performance. Up to now, many researchers have adopted Bekker's semiempirical model to predict rover wheelsoil interaction, which is based on the assumption that soil is deformable when a pressure is applied to it. Despite this basic assumption of the model, the pressure-sinkage relation is not fully understood, and it continues to present challenges for rover designers. This article presents a new pressure-sinkage model based on dimensional analysis (DA) and results of bevameter tests. DA was applied to the test results in order to propose a new pressure-sinkage model by reducing physical quantitative parameters. As part of the work, a new bevameter was designed and built so that it could be successfully used to obtain a proper pressure-sinkage relation of Korean Lunar Soil Simulant (KLS-1). The new pressure-sinkage model was constructed by using three different sizes of flat plate diameters of the bevameter. The newly proposed model was compared successfully with other models for validation purposes.