• Journal of the Korea Safety Management & Science
• /
• v.6 no.3
• /
• pp.27-40
• /
• 2004

There are much dangerous machine in worksite. These make the rate of accidents increase. Specially, among them, the Press work has the highest rate of accidents. Therefore, it has been managed by Industrial safety-health law. It is very important to make a special study of work using the dangerous machine. In press work, it is also important to develop safety system program to improve productivity and work safely, In this reaserch, the safety management system is built for the work improvement of the Press. This paper showed method about dangerous machine.

• Journal of the Korean Society of Safety
• /
• v.16 no.2
• /
• pp.36-43
• /
• 2001

This study is intended to estimate influences upon life cycle of ESPE(Electro Sensitive Protective Equipment) which is kinds of commonly used in press in domestic industry. First the field survey is executed to workers and safety managers at work places. In the survey, the main primary factors influenced the lift cycle of ESPE were vibration due to overload work in workplace. Second, int results showed that 37$m/s^2$ acceleration in press work would lead to the life of 132 for 8 hours work per day. Therefore, the vibration of press inflicted significant effect on the lift of ESPE.

• Medical Lasers
• /
• v.10 no.3
• /
• pp.153-160
• /
• 2021

Background and Objectives This study was conducted to investigate the change of total work and total work ratio for each set, peak heart rate during exercise, and blood lactate for each set during the 5-set bench press exercise at 75% one repetition maximum test (1-RM). Materials and Methods Seven men in their 20s with more than 6 months of experience doing resistance exercises were selected as subjects, and their 1-RM bench press was measured two weeks before the experiment and 75% 1-RM was measured one week before the experiment. In this study, total work was measured for each set, and heart rate was measured during rest and set-by-set exercise. Blood lactate was measured during rest time after each set. The raw data were analyzed by repeated one-way ANOVA. Results Total work and total work ratio decreased from 1 set to 4 sets (p < .05), p < .001), heart rate increased from stable at the start of exercise (p < .001) and decreased between 3 sets and 4 sets (p < .05). Blood lactate increased continuously up to 2 sets (p < .001, p < .01). Conclusion In conclusion, total work and heart rate decreased with muscle fatigue during exercise, and blood lactate continuously increased. The results of this study are expected to be useful references for constructing resistance exercise programs in the future.

• Journal of the Korean Society of Safety
• /
• v.11 no.1
• /
• pp.133-141
• /
• 1996

In spite of a tendency automatizing manaufacturing processes, since power presses are highly repetitive at high speeds, they have still been using to a large extent in many industries. More often than not, press workers have to make decisions whether work materials are located well or not, they should rearrange them or not, and their bodies would be safe or not. If the decision would be wrong, of course, they cause severe damages to human workers so that many workers haven't been willing to work with them. However, with the help of computer technologies, it would be possible to aid the press workers' decisions, and to allow or prohibit them from inserting their hands between slide rams and dies. Thus, this research was aimed to evaluate and analyze possibilities of applying Image Processing Techniques for prevention of press accidents. Through a series of procedures including Capturing work sites and material, Image Enhancement, Contouring, and Edge Finding, work characteristics were obtained and analyzed. The results showed that there were somewhat differences in image characteristics between accident-induced work scenes and accident-free ones. Consequently, if the image analyses are well carried out in real time, they would give a successful help to human press workers.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.10a
• /
• pp.85-90
• /
• 2001

Recent general Press brake has many problems in cutting high accurate products in the progress of industry. Previous hand-operated press brake needs many pre-processing works to adjust bending ang1e and marking-off works to calculate bending length. Also, the hand-operating work makes many geometric errors and has difficulty for variety-mass production. To solve these problems, this paper proposes Computer Numerical Control (CNC) general press brake and development of servo-control system based on database for reduction of geometric errors and pre-processing work time and high accuracy bending work.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.24 no.2
• /
• pp.1-10
• /
• 2006

In the past few years, the printing industry has witness a trend that has become ever more defined: due to the advent of digital technology, the production of short print runs has continued to gain in importance. An important initiative for the support of digital work flow in the manufacturing of printed products is CIP4 consortium. CIP4 stands for "International Cooperation for Integration of Prepress, Press and Post-press, it is an association of around forty international companies, mostly manufacturers of prepress, press and post-press, as well as suppliers and users. In this paper, we studied on the acting application of CIP4 work flow.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1996.10a
• /
• pp.156-160
• /
• 1996

In this study of made Unloader is moving linear transfer system for mainly plastic working or forming of small electronic unit and other at press line. This machine for lading and unloading a workpiece has been installed in a press in order to load and unload a workpiece form a press die. Control method be used PLC. it took data of input from each sensor and send signal of output to actuator today we have a lot of problem at work of press line. most of press work be operated by human so they often hurted terreble accident by press machine. Because press working system in automotive factories are now changing over to a transfer press working system this Unloader will give more easily and speedy production and manpower saving less of pruduction cost high perfomance

• Journal of the Korea Safety Management & Science
• /
• v.6 no.3
• /
• pp.15-26
• /
• 2004

There is much dangerous machine in worksite. These make the rate of accidents increase. Specially, among them, dryness equipment work has the highest rate of accidents. Therefore, it has been managed by safety-health law. It is very important to make a special study of work using the dangerous machine. In press work, it is also important to develop safety system program to improve productivity and work safely In this reaserch. the safety mangement system is built for the work improvement of the Press. I will try new development method about dangerous machine.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.11a
• /
• pp.129-133
• /
• 2000

Vapor oil fer radiator fm press in heat exchangers of air conditioners is carefully considered as the cooling performance can be affected by the residual vapor oil on the surface of radiator fin after fin press working. In this work, vapor oil for radiator fin press was developed in consideration of several properties such as physical characteristics, the rate of volatility, hazardous properties and material compatibility. In addition, it was confirmed that radiator fin press workability adopting the vapor oil and the cooling performance of air conditioner using the radiator fin were good.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.3
• /
• pp.53-64
• /
• 2004

Repetition Strain Injury (RSI) is usually caused or aggravated by poor work processes and unsuitable working conditions - that involve repetitive or forceful movements or the maintenance of constrained or awkward postures. The condition is characterized by discomfort and persistent pain. There are three essential steps to eliminate or control hazards In workplace. Case and Demographic Characteristics for Work-related Injuries and illnesses Involving Days Away From Work, 2002. U.S' was examined. Causes of press operators' RSI were carpal tunnel syndrome(CTS), tendonitis, low back pain, and occupational stress. Recommendations for improvement of productivity are redesign of working conditions, exercise, prevent of RSI and avoiding stress.