• Korean Journal of Food Science and Technology
• /
• v.20 no.4
• /
• pp.536-540
• /
• 1988

Effects of blanching time, chemical dipping, freezing method and storage period on texture, color and yield of frozen whole and sliced mushrooms were investigated, and the results are summarized as follows; Frozen whole mushrooms blanched for 5min. had markedly tougher texture than mushrooms blanched for 1 or 2 minutes. As the storage time of frozen mushrooms increased from 3 to 6 months, shear press values increased very significantly. The texture of Freon frozen and plate frozen mushrooms was similar after 3 months storage. Blanching time did not affect texture of frozen sliced mushrooms significantly, but storage time did. The results of sensory evaluation for texture were in good agreement with shear press values. Chemical dipping methods were effective in maintaining desirable color of frozen whole and sliced mushrooms stored for 3 months. The yield of frozen whole mushrooms was significantly increased by shortening blanching time in combination with chemical dipping. Sliced mushrooms required at least 2 min. blanching, to avoid excessive breakage in mechanical slicing operation, for better yield.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1465-1467
• /
• 2004

In this paper, deduced manufacturing condition of glass/glass curtain wall module and metal curtain wall module. From the results. lamination condition of glass/glass curtain wall module deduced optimum in pumping $time-120^{\circ}C$ 23min, slow $press-120^{\circ}C$. 300mmHg. 3min. standard $press-120^{\circ}C$. 200mmHg. 0.5min. fast $press-120^{\circ}C$. 100mmHg. 0.3min and $curing-140^{\circ}C$, 6min, and lamination condition of metal curtain wall module deduced optimum in pumping $time-120^{\circ}C$. 8min, slow $press-120^{\circ}C$, 700mmHg. 0.5min, standard $press-120^{\circ}C$, 600mmHg, 0.5min. fast $press-120^{\circ}C$, 100mmHg. 1.5min and $curing-140^{\circ}C$. 6min. This time. power uniformity of glass/glass curtain wall module and metal curtain wall module showed each ${\pm}2.7\%,\;{\pm}2.12\%$.

• Journal of Applied Reliability
• /
• v.15 no.3
• /
• pp.181-191
• /
• 2015

Change in labor time is affecting occupational safety and health. Recently reduction in labor time brought innovational operation method, investment in plant and equipment, and flexible labor time in some companies, thereby affecting working conditions for labourers. However, working conditions for some vulnerable social groups have deteriorated. As a result, they are becoming more exposed to risk factors such as injury and emotional stress. In this study we use 2014 KWCS data in order to find the social and demographic characteristics in Korean working conditions. To this end, we use exploratory data analysis approach to find the relationship between some of the important variables in the KWCS data. We also use Press-State-Response model to find which group of people are vulnerable to Press and State. We find that women, people over age 50 and business owners are more vulnerable to Press and State than men, people below age 50 and wage workers.

• Journal of the Korea Safety Management & Science
• /
• v.1 no.1
• /
• pp.55-60
• /
• 1999

Presses are very widely used in industrial and commercial companies and are often the source of serious accidents occurring during operation. In Korea, the press holds the first place in the industrial hazard machines for frequency of accidents. Most of the press accidents are due to the human error. Continuous recordings of eye and hand movements that included operating errors of five experienced subjects were made during the press operation. The results showed that significant differences were observed on eye fixation time, hand fixation time, and lead departure time between the operations that has errors and no errors. The result could be used as basic data to establish a guideline for preventing the accidents.

• Proceedings of the KSMRM Conference
• /
• 2001.11a
• /
• pp.116-116
• /
• 2001

Purpose： PRESS is one of the representative sequences in MRS, but still, we do not have the formul describing the steady state magnetization of it. So, we derive the equation of th magnetization as a function of the echo time and the repetition time, and compare it wit phantom experiments. Method： PRESS consists of three 180 pulses and the additional crusher gradients whic destroy the unwanted coherences of the magnetization. Using the simple vector model, w derive a formula which describes the behaviour of the magnetization In PRESS and compa the results with the phantom experiment. Also, we explore the results of the T1 from STEAM, PRESS and the simple exponential.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.2
• /
• pp.55-69
• /
• 1995

The primary objective of this research was to investigate optimum manufacturing condition of thin composite panels composed of sawdust, polyethylene film and polypropylene net. At the study the experiment was designed to make thin board in which sawdust offers effectiveness as core composing material, polyethylene as adhesive with added urea resin, and polypropylene as stiffness and flexibility in the composition panel. 100 types of thin composite panels were manufactured according to press-lam and mat-forming process of various hot pressing conditions(pressure, temperature and time). They were tested and compared with control boards on bending properties(MOR, MOE, SPL, WML), internal bond strength, thickness swelling, linear expansion and water absorption. At the same time the visual inspections of each types of panels were accomplished. The physical and mechanical properties of composite types passed by visual inspection were analyzed by Tukey's studentized range test. From the statistical analysis, the optimum manufacturing condition of thin composite panels were selected. Compared with two manufacturing processes, mat-forming process performed better than press-lam process in all tested properties. The optimum manufacturing conditions resulted from the experiment and statistical analysis were able to determine as following: the press temperature was shown the most good result at 130$^{\circ}C$ in mat forming process and 140$^{\circ}C$ press lam process, the press time 4 min in both processes, but the press pressure was 25-10kg/$cm^2$ in mat forming and 15k/$cm^2$ press lam process.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.4
• /
• pp.14-25
• /
• 2010

Small cracks or chips of a product appear very frequently in the course of continuous production of an automatic press process system. These phenomena became the cause of not only defective product but also damage of a press mold. In order to solve this problem AE(Acoustic emission) system was introduced. AE system was expected to be very effective to real time detection of the defective product and for the prevention of the damage in the press molds In this study, for the pick and analysis of AE signals generated from the press process, AE sensors/pre-amplifier/analysis and processing board were used as frequently found in the other similar cases. For the analysis and processing the AE signals picked in real time from the normal or the detective products, specialized software called AE-win(software for processing AE signal from Physical Acoustics Corporation) was used. As a result of this work it was conformed that intensity and shape of the various AE signals differ depending on the weight of the press and thickness of sheet and process type.

• Transactions of Materials Processing
• /
• v.19 no.6
• /
• pp.378-386
• /
• 2010

Nowadays there has been great interest in using heat treated cast material for press dies due to several advantages like reduction in die production costs. However, in hot press forming processes H13 forged tool steel is mostly used. Cooling performance of dies in hot press forming processes is considered as an important factor of study and also the IHTC parameter between cast material die and sheet metal should be considered as an essential. In the present study, the IHTC was calculated for the sheet metal in the hot press forming process with cast and forged material dies. The temperature measurements were performed for the sheet metal, casting and forged material dies by applying various contact pressure in hot press forming. IHTC was calculated and studied by adopting the inverse heat convection method in DEFORM-2D. Each IHTC was considered as a function of contact time and contact pressure. The experimental data were compared with calculated data obtained from the proposed equation and references.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.34 no.2
• /
• pp.103-111
• /
• 2011

The reduction of setup time is very important in a lot production system. A punch press is a typical system of lot production. This paper describes a case study to reduce setup time of a punch press manufacturing system. Especially, this case study reduced the time of die exchange in the case that the standardization of die height is impossible realistically because of diversity on die height and heavy expenses. This study adopts a supplementary die and supplementary blocks to make the use of auto-clamping device possible. The paper also gives a sequencing algorithm to reduce the number of exchange of the supplementary die.

• IE interfaces
• /
• v.24 no.3
• /
• pp.241-247
• /
• 2011

This paper develops a mathematical model which searches an optimum lot size of a press line, and applies this model to the scheduling of the press line. This mathematical model is not a widely studied cost model but a model which considers the utilization of the press line under a lean production system. In this paper, the optimum lot size is a minimum lot size which does not exceed the total work time of the press line. A production volume and the priority of the production in the press line are adjusted using this optimum lot size. A mathematical model developed in this paper will allow determining the optimum lot size easily in case of variable production environments such as an introduction of a new product and a fluctuation of production volume of each item. Therefore, our model will make a better scheduling of the press line and will enhance the utilization of it.