• 한국건축시공학회지
• /
• 제12권1호
• /
• pp.64-72
• /
• 2012

Recently, prepackaged-type surface preparation materials using redispersible polymer powders are widely used for interior and exterior finishing in the construction work. The purpose of this study is to evaluate the performance and the quality of prepackaged-type surface preparation materials using a VA/E/MMA terpolymer powder. Surface preparation materials using a VA/E/MMA terpolymer powder were prepared with shrinkage reducing agent contents of 0, 4 % and cellulose fiber contents of 0, 0.5, 1.0 %, and tested for drying shrinkage, strengths, adhesion in tension, crack and impact resistance, water absorption, permeability. As a result, prepackaged-type surface preparation materials show outstanding performance depending on the shrinkage reducing agent and cellulose fiber contents.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.368-373
• /
• 1998

Prepackaged system consists out of a dry mix which contains cement, sand, redispersible polymer powder and admixtures in the right proportions. The purpose of this study is to evaluate the quality of prepackaged-type polymer-modified mortar products using redispersible poly(ethylene-vinyl acetate)(EVA) powder. Polymer-modified mortars using the redispersible polymer powder with powdered with powdered shrinkage-reducing agent were prepared with cellulose fiber contents of 0, 0.5, 1.0% and shrinkage-reducing agent contents of 0, 4%, and tested for drying shrinkage, strength, adhesion in tension, water absorption. From the test results, the prepackaged-type polymer-modified mortar products with 4% of shrinkage-reducing agent content give good properties. and that their properties largely depends on the shrinkage-reducing agent content rather than the cellulose fiber contents.

• Animal Bioscience
• /
• 제34권12호
• /
• pp.2012-2022
• /
• 2021

Objective: In most retail centers, primal pork cuts for sale are usually prepared into retail-ready slices and overwrapped with air-permeable plastic film. Also, meat of Korean native black pig (KNP) is reputed for its superior quality, however, its shelf life during retail display has not been studied. Thus, the objective of this study was to evaluate shelf life of prepackaged retail-ready KNP belly and shoulder butt slices during refrigerated display. Methods: Bellies and shoulder butt obtained at 24 h post-mortem from finishing KNP were used. Each belly or shoulder butt was manually cut into 1.5 cm-thick slices. The slices in each cut type were randomly taken and placed on white foam tray (2 slices/tray) overwrapped with polyvinyl chloride film. The retail-ready packages were then placed in a retail display cabinet at 4℃. Shelf life and sensory quality of the samples were evaluated on day 1, 3, 6, 9, 12, and 15 of display. Results: The shoulder butt reached the upper limit (20 mg/100 g) of volatile basic nitrogen for fresh meat after 9 days while, the belly remained within this limit throughout the display time (15 days). Both the cuts reached a thiobarbituric acid reactive substances level of above 0.5 mg malondialdehyde/kg after 9 days. The a^* (redness) values remained unchanged during first 9 days in both cuts (p>0.05). After 9 days, off-flavor was not found in either cut, but higher off-flavor intensity was found in shoulder butt after 12 days. The shoulder butt was unacceptable for overall eating quality after 12 days while, belly still was acceptable after 12 days. Conclusion: The belly showed a longer shelf life compared to the shoulder butt, and a shelf life of 9 and 12 days is recommended for the prepackaged retail-ready KNP shoulder butt and belly slices, respectively.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.30-31
• /
• 2017

The objective of this study is to evaluate the performance of polymer-modified surface preparation mortars with pozzolanic materials for corrosion prevention method in deteriorated sewage treatment structures. The prepackaged-type surface preparation mortars are prepared with a polymer-binder ratio of 10%, ground granulated blast furnace slag contents of 0, 15, 30%, a fly ash content of 15%. And, the specimens are tested for workability, adhesion in tension, water absorption, crack and impact resistance. As a result, the prepackage-type surface preparation mortars for sewage treatment structure are satisfied with quality requirements by KS F 4716, Japan sewage work agency(JS) and JIS A 6916 for surface preparation mortars.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2001년도 학술논문발표회
• /
• pp.88-92
• /
• 2001

This paper discusses the strength properties of the polymer-modified mortars using redispersible polymer powders, which is widely used for the manufacture of prepackaged-type polymer-modified mortar products at present. The polymer-modified mortars using redispersible polymer powders are prepared with various polymer-cement ratios, and tested for air content, flexural and compressive strengths, and tensile strength. The strength properties are almost the same as those of polymer dispersion-modified mortars, depending on the polymer-cement ratios, and are improved over unmodified mortar. In particular, between tensile strength and glass transition point of polymer powder have a high correlation. It is concluded from the test results that polymer-modified mortars using redispersible polymer powders can be used in the same manner as ordinary polymer dispersion-modified mortars.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회 논문집(I)
• /
• pp.231-236
• /
• 1998

In general, the drying shrinkage of polymer-modified mortars using redispersible polymer powders is much higher than that of unmodified mortar. The purpose of this study is to reduce the drying shringkage of polymer-modified mortars using a redispersible poly(ethylene-vinyl acetate) (EVA) powder, which is widely used for the manufacture of prepackaged-type polymer-modified mortar products at present. Polymer-modified mortars using the redispersible EVA powder with powdered shrinkage-reducing agent were prepared with various polymer-cement ratios and shrinkage-reducing agent contents, and tested for drying shrinkage and strength. From the test results, the drying shrinkage of the redispersible EVA powder-modified mortars with a powdered shrinkage agent is remarkably reduced with increasing shrinkage-reducing agent content, and becomes approximately a half of that of the redispersible EVA powder-modified mortars with the same polymer-cement ratios and without the shrinkage-reducing agent at a shrinkage-reducing agent content of 6%.

• KIEAE Journal
• /
• 제10권5호
• /
• pp.131-137
• /
• 2010

The building industry must aim at high-durability and sustainability. A holistic life cycle based approach is recommended to reduce the environmental load. In recent years, technical innovations in the construction industry have advanced to a great extent, and caused the active research and development of high-performance and multifunctional construction materials. Nowadays, various polymer powders have been commercialized to manufacture construction materials in the form of prepackaged-type products, which have rapidly been developed for lack of skilled workmen in construction sites. Recently, terpolymer powders of improved quality have been developed and commercialized as cement modifiers. And, hydrocalumite is a material that can adsorb the chloride ions (Cl-) causing the corrosion of reinforcing bars and liberate the nitrite ions (NO2-) inhibiting the corrosion in reinforced concrete, and can provide a self-corrosion inhibition function to the reinforced concrete. The purpose of this study is to ascertain the self-corrosion inhibition function of polymer-modified mortars using redispersible powders with hydrocalumite. Polymer-modified mortars using VA/E/MMA and VAE redispersible powders are prepared with various calumite contents and polymer-binder ratios, and tested for chloride ion penetration depth, corrosion inhibition. As a result, regardless of the polymer-binder ratio, the replacement of ordinary portland cement with hydrocalumite has a marked effect on the corrosion-inhibiting property of the polymer-modified mortars. Anti-corrosion effect of polymer-modified mortars using VA/E/MMA terpolymer powder with hydrocalumite is higher than that of VAE copolymer powder.

• 부모자녀건강학회지
• /
• 제3권2호
• /
• pp.49-66
• /
• 2000

Pregnancy is a task of creation in which a women mobilizes her self and the resources available to her in the generation of a new person. Through the pregnancy, a mother has formed the new human relationship with a fetus. Maternal-fetal relationship is considered one of mechanism making the relationship of mother and child. It is important to well-being of mother and fetus, too. The earliest interaction between a mother and her child is during prenatal period. Maternal-fetal dyad is unique and perceived interactions with the fetus make the pregnancy real for the mother. Maternal behavior is "instinctive" and is formed in early childhood by copy of the mother. But, Rubin argues that this behavior is an open intellectual system rather than a prepackaged bundle of traits. There is openness to new learning and a high value placed on knowing which occurs with silent organization in thought. Thus, nurses and other health professionals provide prenatal care that optimally is part of the environment in which the maternal-fetal dyad develops. Thus it is appropriate for nurses to increases their understanding of the dyad and to explore ways to enhance its development. This study focusses on the interaction ability and response of fetus, and the maternal-fetal interaction. The research of fetal responses that involve physiological changes and motor movement have been shown to coccur to both external sensory stimuli and to maternal emotional states. The fetus does also have sensory capacity to be aware of some maternal behaviors, and the motor ability to respond in a way the mother can notice. Thus, very rudimentary interactions appear to be possible. Maternal awareness of fetal activity was supported by several studies. More interesting to the present study are description of maternal-fetal interaction and the finding that there appear to be levels of sensitivity to the fetus involved in maternal-fetal interactions. First, recognition comes that the fetus is separate from the maternal self. Next, the fetus engages in. Lastly, the parent may describe active interaction with the fetus, believing that mother and fetus are communicating on a meaningful level. Several interventions, developed to promote more active interaction between mother and fetus, have been reviewed. In general, the parents were taught to stimulate the fetus and to notice the fetus' responses. This type of intervention might increase the mother's sensitivity to her unborn baby, and she may have a head start toward learning how to res pond sensitivity to the newborn infant. Research In the area of maternal-fetal interaction is scarce. Sensitive behavior is construed as an appropriate and timely response to a signal of need from another person, but no such signal of need can be claimed regarding the fetus. The highest level of maternal-fetal interaction, therefore, might be based more on maternal representations of the imagined fetus than on factual evidence of fetal participation.