• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.3
• /
• pp.49-59
• /
• 2004

The paper describes the preliminary ship design method using deterministic approach and probabilistic approach. In deterministic approach, there are computational aspects to applying not only the integration concurrently of principal dimension decisions and hull form variations but also hydrostatic coefficients that applied to optimization iterative process. Therefore, this paper developed that actual design concept at the preliminary ship design more than sequential design which separated in principal dimension decisions and hull form variations. Furthermore, a probabilistic approach at the preliminary ship design is applied to efficiently solve design information uncertainty that compared to deterministic approach.

• Journal of Ocean Engineering and Technology
• /
• v.14 no.2
• /
• pp.117-120
• /
• 2000

In the Step of preliminary ship design a designer should decide a economic ship. The economic ship has the least building cost to a annual freight amount satisfying a given design condition That is RFR is minimum among alternatives.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.20 no.3
• /
• pp.25-32
• /
• 1983

Korea Institute of Machinery and Metals(KIMM) purchased a computer program for preliminary ship design from the ship Research Institute of Norway(NSFI). The program PROCAL(PROject CALculation) is described with other programs developed by NSFI such as SHIPMODEL, FLEET, SHIPSHAPE, SKRIN.

• Journal of Mechanical Science and Technology
• /
• v.18 no.11
• /
• pp.1923-1931
• /
• 2004

Manufacturing of complex surface plates in stern and stem is a major factor in cost of a preliminary ship design by computing process. If these hull plate parts are effectively classified, it helps to compute the processing cost and find the way to cut-down the processing cost. This paper presents a new method to classify surface plates effectively in the preliminary ship design using neural network. A neural-network-based ship hull plate classification program was developed and tested for the automatic classification of ship design. The input variables are regarded as Gaussian curvature distributions on the plate. Various applicable rules of network topology are applied in the ship design. In automation of hull plate classification, two different numbers of input variables are used. By observing the results of the proposed method, the effectiveness of the proposed method is discussed. As a result, high prediction rate was achieved in the ship design. Accordingly, to the initial design stage, the ship hull plate classification program can be used to predict the ship production cost. And the proposed method will contribute to reduce the production cost of ship.

• 한국기계연구소 소보
• /
• s.15
• /
• pp.117-125
• /
• 1985

It is usual practice to ballast a sip to maintain requires operational safety at sea. However, excessive ballasting may reduce the operational economy of a ship. Therefore, The determination of the optimal location and quantity of ballast water is one of the important works at the preliminary design stage. To provide a convenient tool to ship designers the program for the determination of the optimal location and program the effect of the change of ballast water quantity in each tank on some characteristics of a ship, such as trim, initial stability and heel, is investigated and the minimum quantity of ballast water for each tank which satisfies the operational safety requirements is calculated.

• International Journal of Ocean System Engineering
• /
• v.2 no.4
• /
• pp.233-238
• /
• 2012

In this study, we carried out a precedent investigation for an ultra-large container ship, which is expected to be a higher value-added vessel. We studied a preliminary optimized design technique for estimating the principal dimensions of an ultra-large container ship. Above all, we have developed optimized dimension estimation models to reduce the building costs and weight, using previous container ships in shipbuilding yards. We also applied a generalized estimation model to estimate the shipping service costs. A Genetic Algorithm, which utilized the RFR (required freight rate) of a container ship as a fitness value, was used in the optimization technique. We could handle uncertainties in the shipping service environment using a Monte-Carlo simulation. We used several processes to verify the estimated dimensions of an ultra-large container ship. We roughly determined the general arrangement of an ultra-large container ship up to 1500 TEU, the capacity check of loading containers, the weight estimation, and so on. Through these processes, we evaluated the possibility for the practical application of the preliminary design model.

• 한국기계연구소 소보
• /
• s.17
• /
• pp.145-156
• /
• 1987

A PSWATH is a computer program for the determination of principal particulars of Small Waterplane Area Twin Hull (SWATH) Ship design at the preliminary design stage. This paper describes the PSWATH system and the underlying theory. The major calculation modules are hull definition, resistance and propulsion, weight estimation and pitch stability analysis. Use of the model is illustrated by input, output and means of examples.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.15 no.4
• /
• pp.1-5
• /
• 1978

The preliminary ship design step is made into a non-linear programming(NLP) problem. And using SUMT-exterior method and Hook Jeeves pattern search, the optimum ship characteristics are determined for the case where the ship is built in Korea and is operated by Koreans. Three programs for bulk carrier, tanker, and container ship are constructed and several sensitivity tests are performed. The result has little difference from the results of the other papers, but for high interest rate of return, slightly larger and faster ship is superior, and for low labour costs, slightly smaller and slower ship is superior.

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.5
• /
• pp.426-434
• /
• 2011

Accurate weight prediction methods are an essential of the ship design in both ship cost managements and performance satisfactions. When no parent or similar ships are available, an adequate method of the ship weight estimating is required. In this study, there was carried out to develop the ship weight estimating method for the preliminary design phase. The weight estimating methods were first surveyed by the references and summarized their characteristics. The weight estimation method by statistical approach was developed for the container ship because the containerized transportation markets is gradually growing and ship's size and loading capacity are rapidly enlarged. The correlation analysis and the multiple regression analysis were used for developing the weight estimating method. As a results of evaluating the developed method, the error ratio of the variation between estimated weight and ship's data was about 5%. And it was only 1% difference with the calculating weight of conceptual design results by shipyard design team that the estimating weight of ultra-large container ship was predicted by the developed method.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.6
• /
• pp.535-541
• /
• 2008

As the concurrent engineering concept has emerged along with the support of optimization techniques, lots of endeavors have been made to apply optimization techniques to actual design problems for a holistic decision. Even if the range of design problems which the optimization is applicable to has been extended, most of ship designs still remain in an iterative approach due to the difficulties of seamless integration of all related design activities. In this approach, an entire design problem is divided into many sub-problems and carried out by many different disciplines through complicated internal interactions. This paper focuses on preliminary ship design process. This paper proposes a process centric integrated framework as the first step to establish a workflow based design process management system. The framework consists of two parts; a schedule management part to support a manager to monitor current progress status and adjust current schedule, and a process management part to assist a design to effectively perform a series of design activities by following a predefined procedure. Overall system are decomposed into modules according to the target to be managed in each module. Appropriate interactions between the decomposed modules are designed to achieve a consistency of the entire system. Design process model is also designed on a thorough analysis of actual ship design practice. The proposed framework will be embodied using a commercial workflow package.