• 제목/요약/키워드: preliminary design

검색결과 2,097건 처리시간 0.027초

SWATH선의 초기설계 프로그램에 관한 연구 (A study on the SWATH Ship Design Program at the Preliminary Design Stage)

  • 이동곤
    • 한국기계연구소 소보
    • /
    • 통권17호
    • /
    • pp.145-156
    • /
    • 1987
  • A PSWATH is a computer program for the determination of principal particulars of Small Waterplane Area Twin Hull (SWATH) Ship design at the preliminary design stage. This paper describes the PSWATH system and the underlying theory. The major calculation modules are hull definition, resistance and propulsion, weight estimation and pitch stability analysis. Use of the model is illustrated by input, output and means of examples.

  • PDF

경제성 평가에 의한 군함의 초기설계에 관한 연구 (A Study on Preliminary Design of Warships by Economic Evaluation)

  • 신수철
    • 대한조선학회논문집
    • /
    • 제45권2호
    • /
    • pp.221-228
    • /
    • 2008
  • This paper describes to determine optimum main particulars of warships which satisfy user's requirements in a concept design stage with minimum construction cost and maximum transportation efficiency. Present worth was used as an assessment criteria of the economical efficiency. And Pareto optimal set was used to have the optimum design.

컴퓨터 그래픽스를 이용한 케이블 구조의 초기형태 설계 (Preliminary Form Design of Cable Structure using Computer Graphics)

  • 김남희;고현무;홍성걸
    • 한국전산구조공학회논문집
    • /
    • 제24권4호
    • /
    • pp.375-382
    • /
    • 2011
  • 최근 컴퓨터 그래픽 S/W는 변수화 모델링과 생성알고리즘을 제공함으로써 기하학적 표현의 다양성뿐만 아니라 설계자의 의도를 체계적으로 모듈화할 수 있는 여러 가지 가능성을 열어주고 있다. 이 연구에서는 이러한 가능성을 지닌 컴퓨터 그래픽 S/W기반으로 초기 구조형태를 생성하는 방법을 제시하고자 한다. 특히 변수화 모델링과 생성 알고리즘을 이용하여 다양한 설계대안을 생성한다. 더욱이 동적 그래픽스개념을 이용하여 설계자가 한편에서는 구조형태를 생성하는 동안에, 또 다른 한편에서는 상응하는 힘의 흐름도가 마련되도록 한다. 이는 궁극적으로 힘의 흐름에 근거한 합리적 초기 구조형태 설계를 지원하게 될 것이다.

달착륙선 추진시스템 기본 설계 및 지상 모델 설계 (Preliminary design of lunar lander propulsion system and ground test model)

  • 김수겸;유명종
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2010년도 제35회 추계학술대회논문집
    • /
    • pp.581-584
    • /
    • 2010
  • 한국항공우주연구원에서는 2020년대에 수행하기로 계획되어 있는 달탐사를 준비하기 위해 달 탐사선 및 착륙선 추진시스템의 기본 설계를 진행하고 있으며 추진시스템의 설계 검증 및 추력기의 성능 검증을 위한 착륙 시험 계획을 진행하고 있다. 올해는 그 첫 단계로 추진시스템의 개념 설계가 이루어졌으며 지상 시험을 수행하기 위한 200N급 단일추진제 추력기의 설계가 이루어졌다. 본 논문에서는 추진계 설계를 위한 trade-off 연구 결과와 추진계 및 추력기의 기본 설계에 대해 소개할 예정이다.

  • PDF

초기설계 단계에서의 잠수함 수평발사 모델링 연구 (A Study on the modeling of horizontal launch at submarine in the preliminary design phase)

  • 김동훈
    • 한국군사과학기술학회지
    • /
    • 제7권3호
    • /
    • pp.38-46
    • /
    • 2004
  • This paper deals with the development of simulation model for the horizontal launch at submarines in the preliminary design phase. The simulation model is composed of submarine motion model, cross flow force model in the bow of submarine, and weapon motion model In launch through torpedo tubes. Using submarine and weapon characteristics and simulation condition, it can simulate the exit velocity of weapon through torpedo tubes and reaction forces. It should be helpful for the analysis of the safe launch and design requirements in the preliminary design phase of a submarine or a weapon launched through torpedo tubes.

Insights from the KNGR Preliminary Level 1 Probabilistic Safety Assessment

  • Na, Jang-Hwan;Oh, Hae-Cheol;Oh, Seung-Jong
    • 한국원자력학회:학술대회논문집
    • /
    • 한국원자력학회 1998년도 춘계학술발표회논문집(1)
    • /
    • pp.862-868
    • /
    • 1998
  • Korean Next Generation Reactor(KNGR) is a standardized evolutionary Advanced Light Water Reactor design under development Korea Power Company(KEPCO). It incorporates design enhncements such as active and passive advanced design features(ADFs) to increase the plant safety. A Preliminary level 1 Probabilistic Safety Assessment(PSA) has been performed for KNGR to examine the effect of these safety features. The preliminary PSA result shows that it meets the KNGR safety goal on core damage frequency(CDF). The result of this safety assessment shows that the four-train safety systems, and the ADFs such as Passive Secondary Cooling System (PSCS) contributes greatly to the reduction the CDF. Furthermore, several design changes are made or proposed for detailed review based on the PSA insights.

  • PDF

원자력발전소 면진적용을 위한 기존 설계식의 적용성 검토 (Evaluation of the Applicability of Existing Design Formula for Seismic Isolation to Nuclear Power Plants)

  • 김현욱
    • 한국지진공학회논문집
    • /
    • 제16권6호
    • /
    • pp.29-36
    • /
    • 2012
  • Involved in a research for the application of seismic isolation to the nuclear industry, this study evaluates firstly the responses of seismic isolation system considering general ranges of structural period and damping ratio by using preliminary design formula. Secondly, coupling effects of input motions were evaluated to find out appropriate conditions of excitations and effect of the iteration for calculating yield displacement of lead core was also assessed in terms of response of a seismically isolated structure. Finally, the results of preliminary design calculation were compared with those of dynamic analysis and the propriety of the formula was evaluated and appropriate ranges of reduction factor were also suggested from the results.

가스터빈 연소기 기본 설계 기법 소개 (Introduction to preliminary design tool for gas turbine combustors)

  • 김대식;유경원;황기영;민성기
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2013년도 제46회 KOSCO SYMPOSIUM 초록집
    • /
    • pp.133-134
    • /
    • 2013
  • Gas turbine technology has steadily advanced since its inception and continues to evolve. Development is active in producing both smaller gas turbines and more powerful and efficient engines. However, it is shown that our state-of-the-art technologies for gas turbine developments remain at a basic level by comparisons with advanced technology countries. This paper shows that development process and preliminary design tools for gas turbine combustor were introduced as a first results of source technology secure researches for the gas turbine combustors.

  • PDF

디지털 드로잉 기법과 특수 분장을 활용한 3D 아트메이크업 디자인 프로세스 (3D Art Make Up Design Process utilizing Digital Drawing Technique and Special Make Up)

  • 신원선;신세영
    • 패션비즈니스
    • /
    • 제15권2호
    • /
    • pp.131-144
    • /
    • 2011
  • The purpose of this study is to propose 3D art make-up design process by reproducing real objects through preliminary digital drawing with Photoshop (Photo Shop CS4.0, Adobe, USA) and using special make-up that has never been done previously, and produce creative problem solving plan to make concrete expanding thoughts and ideas. As for this study method, this study was composed of preliminary study, literature study by book examination and positive study on design process that performed preparatory work and reproduced real objects. Real case study by art make-up design process can improve effective design expressing ability by utilizing special make-up, diversify techniques, extend expression areas by materials, and create unique design. In addition, preliminary work by digital drawing, a process to predict real object work in advance, could reduce time and cost while improving work skill for work production, raise design accuracy and make easy the modification of idea. This study is anticipated to activate digital make-up by various digital techniques including Photoshop.

폐교시설의 활용모형 개발을 위한 예비 분류체계 도출 연구 - 선행연구와 공공 디자인지표의 비교를 중심으로 - (A Study on the Preliminary Classification System for the Development of the Application Model of Closed School Facilities - Focused on the Comparison of Public Design Indicators with Pre-research -)

  • 김재영;이종국
    • 청소년시설환경
    • /
    • 제17권1호
    • /
    • pp.131-141
    • /
    • 2019
  • The purpose of this study is to derive and type utilization indexes by comparing public design indicators with preceding studies related to closed school facilities, and to derive preliminary classification systems through a correlation review between indicators. Pre-research was conducted in the scope of academic papers, academic journals, research reports, and special act for promoting the utilization of closed school assets. Public design indicators were set in the scope of domestic design guidelines, the Seoul city public design assessment system, the 'Good Building' designation system, and the UK Design Quality Index (DQI). and the design review of the British architects. First of all, the research method looked at laws, procedures and utilization of closed schools, and reviewed the preceding study and domestic and international public design indicators sequentially. Next, the association was reviewed through a comparison between the preceding study and the public design indicators, and a preliminary classification system for the use of closed schools was derived from this.