• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2004년도 춘계 학술발표대회 개요집
• /
• pp.311-313
• /
• 2004

WC-12-17%Co powders with nano- and micro-structures were deposited by cold spray process using nitrogen and helium gases. The results show that there is no detrimental phase transformation and/or decarburization of WC by cold spray deposition as expected. It is also observed that nano-sized WC in the feedstock powder is maintained in the cold spray deposition. It is demonstrated that it is possible to fabricate the nano-structured WC-Co coating with low porosity and very high hardness (-2050 HV) by cold spray deposition with reasonable powder preheating.

• 한국식품영양학회지
• /
• 제5권2호
• /
• pp.163-169
• /
• 1992

The changes in the various chemical compositions and textural properties of salted vegetables during salting and fermentation were reviewed with 25 papers published from 1981 to 1991 The changes in the texture of vegetables were largely affected by the properties of pectic substances, and additional factors such as salt type, salt concentration, salting time, temperature, preheating treatment, enzyme, salt mixtures, salt-fermented fish and garlic contents, were concerned complexly.

• 태양에너지
• /
• 제7권2호
• /
• pp.54-64
• /
• 1987

Experiments on honeycomb structure collectors (HSC with/without cover) were performed and the experimental results showed good agreement with the preceding analytical results. The tendency of the efficiency of HSC was same with that of conventional air-type solar collector, even though there were some seasonal differences. Therefore, HSC, which can be itself utilized as a part of building structure, is applicable to space heating as well as preheating of industrial process and drying.

• 동아시아식생활학회지
• /
• 제5권3호
• /
• pp.359-370
• /
• 1995

Kimchi is a traditional fermented vegetable in Korea. It has unique taste and flavor due to the variability of raw vegetable, subingredient and their ratio of combination. Fermentation method have very critical effect on these charicteristics. Overall taste of Kimchi is also influenced by texture. In this paper, the changes in texture of Kimchis were reviewed related to pectic substance, enzymatic activities and other chemical changes during the fermentation of Kimchi. Moreover, treatments to prevent softening of Kimchi texture such as preheating, CaCl$_2$ addition, their combination effect and chitosan addition were summarized from the literatures.

• 한국재료학회지
• /
• 제22권6호
• /
• pp.309-315
• /
• 2012

Metal foam has many excellent properties, such as light weight, incombustibility, good thermal insulation, sound absorption, energy absorption, and environmental friendliness. It has two types of macrostructure, a closed-cell foam with sealed pores and an open-cell foam with open pores. The open-cell foam has a complex macrostructure consisting of an interconnected network. It can be exploited as a degradable biomaterial and a heat exchanger material. In this paper, open cell Mg alloy foams have been produced by infiltrating molten Mg alloy into porous pre-forms, where granules facilitate porous material. The granules have suitable strength and excellent thermal stability. They are also inexpensive and easily move out from open-cell foamed Mg-Al alloy materials. When the melt casting process used an inert gas, the molten magnesium igniting is resolved easily. The effects of the preheating temperature of the filler particle mould, negative pressure, and granule size on the fluidity of the open cell Mg alloy foam were investigated. With the increased infiltration pressure, preheat temperature and granule sizes during casting process, the molten AZ31 alloy was high fluidity. The optimum casting temperature, preheating temperature of the filler particle mould, and negative pressure were $750^{\circ}C$, $400-500^{\circ}C$, and 5000-6000 Pa, respectively, At these conditions the AZ31 alloy had good fluidity and castability with the longest infiltration length, fewer defects, and a uniform pore structure.

• Journal of Welding and Joining
• /
• 제28권6호
• /
• pp.70-75
• /
• 2010

This study intends to investigate the weldability and mechanical characteristics of butt weld joints by LAFSW for dissimilar materials (Al6061-T6 and SS400). At optimum welding conditions, the tensile strength of dissimilar materials joints made by FSW is found to be lower than that of LAFSW. Due to the increase in plastic flow and formation of finer recrystallized grains at the TMAZ and SZ by laser preheating in LAFSW, the hardness in LAFSW appeared to be higher than that of FSW. Compared with FSW, finer grain size is observed and elongated grains in parent metal are deformed in the same direction around the nugget zone in TMAZ of Al6061-T6 by LAFSW. Whereas, at weld nugget zone, coarse grain size is appeared in LAFSW compared to FSW, which is owing to more plastic flow due to laser preheating effect. In dissimilar materials joints by LAFSW, ductile mode of fracture is found to occur at Al6061 side with fewer brittle particles. Mixed mode of cleavage area and ductile fracture is observed at SS400 side.

• Journal of Acupuncture Research
• /
• 제15권2호
• /
• pp.173-182
• /
• 1998

In order to evaluate calorie rate of moxa-combustion(direct moxibustion=DM, indirect moxibustion with stainless steel tube=IMS, indirect moxibustion with ginger slice=IMG), calorie rate(%) in the preheating period, heating period, retaining period, and cooling period was calculated respectively to the total combustion calories in all the periods. The result are as follow: 1. Indirect moxibustion with stainless steel tube had the highest rate with the statistical significance than other groups during the preheating period, represented statistical differences between IMS group and IMG group, and also between DM group and IMS group. 2. Indirect moxibustion with ginger slice group showed the highest rate with the statistical significance and followed by DM group and IMG group during the heating period, represented statistical difference among DM, IMS, and IMG group. 3. Direct moxibustion group had the highest rate with the statistical significance than other group during the retaining period, represented statistical difference between DM group and IMG group, and also between DM group and IMS group. 4. Indirect moxibustion with stainless steel tube had the highest rate with the statistical significance than other groups during the cooling period, represented statistical differences between IMS group and IMG group, and also between IMS group and DM group.

• 한국실천공학교육학회논문지
• /
• 제3권1호
• /
• pp.9-14
• /
• 2011

국내 천연가스 공급계통에 있어서 냉열 에너지의 동력 회수에 관한 엑서지 해석 방법을 개발하므로, 에너지 시스템의 유효이용 방안 모색과 함께 엑서지 해석의 효용성을 증명한다. 현재 운영 중인 (1) 가열기에 의한 가열-PVC 감압 공급 시스템, (2) 감압과정에 팽창기를 도입하는 가열-팽창일-PVC 감압 공급 시스템, (3) 가열기 없이 팽창기를 도입한 팽창기-PVC 감압의 경우에 대해 엑서지 해석을 수행한다. 시뮬레이션은 NG 공급 시스템에 팽창기를 도입을 모델링하고, 유입 NG의 압력과 온도, 출구 NG의 압력과 온도에 대해 이루어 졌다. 팽창기로부터 얻을 수 있는 전력생산량은 팽창기 입출구의 NG 압력비가 클수록 많아진다. 그러나 압력비가 커면 온도의 하강이 심해져, 팽창기 입구에서의 가스 가열이 필요하며 이에 따른 연료소비량도 압력비 증가와 함께 상승한다. 엑서지 해석은 시스템 내 에너지 손실 위치와 양을 알 수 있다. 해석결과 가열-PVC 감압의 공급 시스템에서 PCV에 의해 소멸되는 엑서지가 가장 높았으며, 이 소멸 엑서지는 팽창기 설치를 통해 동력을 회수하므로 줄일 수 있다. 팽창기 입구에서 NG의 온도 증가는 엑서지 회수율을 향상시킬 수 있지만, NG의 열손실로 인해 팽창기의 기계 엑서지 효율은 감소한다. 이들 결과로 부터 엑서지 해석의 효용성을 알 수 있다.

• 한국전기전자재료학회논문지
• /
• 제14권2호
• /
• pp.104-110
• /
• 2001

Structural, optical and electrical properties of Cd$_{1-x}$ Zn$_{x}$S films deposited by chemical bath deposition(CBD), which is a very attractive method for low-cost and large-area solar cells, are presented. Especially, in order to control more effectively the zinc component of the films, zinc acetate, which was used as the zinc source, was added in the reaction solution after preheating the reaction solution and the pH of the reaction solution decreased with increasing the concentration of zinc acetate. The films prepared after preheating and pH control had larger zinc component and higher optical band gap. The crystal structures of Cd$_{1-x}$ Zn$_{x}$S films was a wurtzite type with a preferential orientation of the (002) plane and the lattice constants of the films changed from the value for CdS to those for ZnS with increasing the mole ratio of the zinc acetate. The minimum lattice mismatch between Cd$_{1-x}$ Zn$_{x}$S and CdTe were 2.7% at the mole ratio of (ZnAc$_2$)/(CdAc$_2$+ZnAc$_2$)=0.4. As the more zinc substituted for Cd in the films, the optical transmittance improved, while the absorption edge shifted toward a shorterwavelength. the photoconductivity of the films was higher than the dark conductivity, while the ratio of those increased with increasing the mole ratio of zinc acetate. acetate.

• 에너지공학
• /
• 제5권1호
• /
• pp.50-55
• /
• 1996

상용 code인 Fluent를 이용하여 도자기의 1차 소성로에 대해 온도장과 속도장을 계산하고 열효율을 산출하였다. 수치해석의 변수로는 배출구 및 도자기의 위치를 변화시켰으며, 수치해석 방법은 검사체적에 기초한 유한차분방법 및 Upwind scheme과 SIMPLEC Algorithm을 사용하였고 난류모델로는 표준 k-$\varepsilon$ 모델을 사용하였다. 계산결과 출구 위치가 전체 소성로내 벡터유동의 양상을 크게 좌우하는 것으로 나타났으며, 전체 온도장에 대해서는 복사의 영향으로 큰 차이를 보이지 않았으나 예열대 상부에 출구가 있는 경우와 비교할 때 예열대 또는 냉각대의 측면에 출구가 있는 경우에 그 영역의 온도가 다소 높게 나타났다. 소성품의 위치는 로내 유동장 및 온도 분포에 크게 영향을 끼치지는 않으나 소성품 내 온도는 그 위치하는 영역의 온도 분포에 크게 영향을 받는 것으로 나타났다. 예열대 상부에 출구가 있는 경우 열효율은 17%로 매우 저조하였고 출구에서의 가스온도는 약 1000 K로 매우 높았다.