• Title/Summary/Keyword: precooling

Search Result 85, Processing Time 0.024 seconds

The Freezing of Mouse Embryos (생쥐배의 동결보존)

  • 윤문석;정길생
    • Korean Journal of Animal Reproduction
    • /
    • v.8 no.2
    • /
    • pp.116-121
    • /
    • 1984
  • These experiments were carried out to examine the effect of rapid thawing (500$^{\circ}C$/min) on the survival of 8-cell mouse embryos cooled slowly (0.5-1$^{\circ}C$/min) to precooling temperatures between -10 and 070$^{\circ}C$ before direct transfer ofembryos to -196$^{\circ}C$, and to compare the survival of embroys thawed slowly (20$^{\circ}C$/min) and rapidly (500$^{\circ}C$/min) after in vitro culture. In addition, the sensitivity of 8-cell mouse embroys to the rate of addition and removal of cryoprotectant at room temperauture, and the effect of developing stages on the survival of embryos frozen-thawed slowly were investigated. The results obtained were summarized as follows: 1. Embryos were survived in rapid thawing (500$^{\circ}C$/min) only when slow cooling was terminated at relatively high subzero teperaure (-20 to -60$^{\circ}C$). The highest survival rate(77.0%) in in vitro culture of embryos thawed rapidly was obtaeined after transfer to -196$^{\circ}C$ from -40$^{\circ}C$. 2. For the survival of embryos in slow thawing (20$^{\circ}C$/min.), slow cooling to lower subzero temperature (-50$^{\circ}C$ and below) was required before transfer of embryos to -196$^{\circ}C$. These results indicate that embryos transferred to -196$^{\circ}C$ from high subzero temprature contain much interacellular ice to damage them during slow warming but to permit survival of embryos after rapid warming. 3. The Survival rate (72.7%) of 8-cell mouse embryos after rapid addition and removal of cryoprotectant, DMSO at room temperature was similar to that (83.9%) after slow addition and removal of cryoprotectant at same temperature. 4. The survival rates of 1-, 2-, 4- and 8-cell embryos frozen-thawed slowly were 26.7, 76.4, 70.0 and 83.9%, respectively.

  • PDF

Influence of Vacuum Cooling on Browning, PPO activity and Free Amino Acid of Shiitake Mushroom (진공 예냉처리가 포장 저장중 표고버섯의 품질에 미치는 영향)

  • Kim, Byeong-Sam;Kim, Oui-Woung;Chung, Jin-Woung;Kim, Dong-Chul;Nahmgung, Bae
    • Applied Biological Chemistry
    • /
    • v.38 no.4
    • /
    • pp.345-352
    • /
    • 1995
  • The influence of vacuum cooling and modified atmospheric packaging was investigated about browning degree, polyphenoloxidase(PPO) activity and free amino acid of shiitake mushroom. During storage, surface browning was inhibited by precooling. PPO activities of shiitake mushroom was increased during storage. Especially, PPO activity was rapidly increased as surface browning was proceeded. And PVC-wrapped mushroom was lower than carton box-packed mushroom in the changes of surface browning and PPO activity. Total free amino acid contents of shiitake mushroom was 2,510 mg% at harvest, but free amino acid content of shiitake mushroom decreased consistantly during storage. Precooled mushroom had more free amino acid content than non-precooled and their contents were fluctuated by storage temperature, packaging methods and storage periods.

  • PDF

Influence of Ag Precoating of $Bi_{2212}$ Superconductor-In Base Solder Soldering ($Bi_{2212}$ 초전도체와 In 계열 solder의 soldering에서 Ag precoating의 영향)

  • Jang Ji-Hoon;Kim Sang-Hyun;Shin Seung-Yong;Lee Yong-Chul;Kim Chan-Joong;Hyun Ok-Bae;Park Hae-Woong
    • Journal of the Korean institute of surface engineering
    • /
    • v.39 no.2
    • /
    • pp.57-63
    • /
    • 2006
  • In this study, In-base solder was applied to the interface between $Bi_2Sr_2Ca_1Cu_2O_x(Bi_{2212})$ superconductor and Cu-Ni shunt metal at the temperature lower than $150^{\circ}C$. Most of the cases, $Bi_{2212}$ superconductor was precoated with Ag by electroplating in order to improve the contact properties of the solder layer. When the superconductor was directly soldered on to the superconductor, the solder was easily separated without external force. The shear strength of the contact between superconductor and shunt metal increased from 69.2 kgf to 74.4 kgf and 80.1 kgf, as the current density of the Ag electroplating was changed from 63 mA to 96 mA and 126 mA, respectively. The contact strength also increased to 49.9 kgf and 69.2 kgf when thickness of the electroplated Ag layer increased to $5{\mu}m$ and $10{\mu}m$, reapectively.

Effect of Pallet-unit MAP Treatment on Freshness Extension of Spring Chinese Cabbage (Pallet-unit MAP처리에 따른 봄배추의 선도 연장 효과)

  • Lee, Young-Joo;Lee, Hye-Ok;Kim, Ji-Young;Kim, Byeong-Sam
    • Journal of the Korean Society of Food Culture
    • /
    • v.31 no.6
    • /
    • pp.634-642
    • /
    • 2016
  • Chinese cabbage is produced and consumed as a main material for kimchi and as a staple vegetable in Korea throughout the year. However, due to environmental changes unbalance between supply and demand is repeated annually, requiring development of long-term storage technologies. Chinese cabbages, were harvested, put in plastic boxes, and precooled at $2^{\circ}C$ for 24 hours using forced air precooler. After precooling, Chinese cabbages were MAP-treated with 0.02 mm HDPE film and functional film and stored at low temperature ($1{\pm}0.5^{\circ}C$). The weight-loss rates after 9-weeks of storage were 8.47% in the control group, 4.07% in the HDPE film-treated group, and 3.07% in the functional film-treated group, respectively, suppressing weight loss. Trimming loss rate after 6-weeks of storage was 6.86% in the functional film MAP-treated group and lower than 7.50% in the control group. In the sensory test with 7 points as the limit of commodity, the control group lost it after 6-weeks of storage while the MAP-treated groups retained over 7 points. The functional film MAP-treated group showed over 6 points for processing as kimchi until 9-weeks of storage, proving that Pallet-type MAP storage is effective for extending storage life of spring Chinese cabbage.

Effects of Vacuum Precooling on Shelf Life of Pleurotus eryngii during PE Packaging Storage (큰느타리 버섯의 PE 포장 저장 중 선도에 미치는 예냉처리 효과)

  • Beik, Kyung-Yean;Lee, Ye-Kyung;Kim, Jae-Won;Park, In-Sik;Kim, Soon-Dong
    • Food Science and Preservation
    • /
    • v.16 no.2
    • /
    • pp.166-171
    • /
    • 2009
  • The effects of vacuum precooling(VP) on the shelf-life of polyethylene film(PE) packaged King oyster mushrooms(Pleurotus eryngii) during storage at $-1^{\circ}C$ were investigated. VP was conducted below $0^{\circ}C$ in a $-1^{\circ}C$ cold chamber of 40 minutes, and mushrooms were stored for 30 days in batches of 1kg. The weight loss of the VP-treated mushroom was slightly lower than that of control. The $O_2$ concentrations of VP-treated mushroos, within 4 days of storage, were 2.44-14.50 %/kg-package/hr, thus higher than control values(2.01-8.19%/kg-package/hr). $CO_2$ generation of VP-treated mushrooms, again within 4 days of storage, was 0.47%/kg-package/hr, thus lower than that of controls(0.58%/kg-package/hr). The $CO_2/O_2$ ratio peaked on day 4 of storage in the control group, tbut no such peak was observed in VP-treated mushrooms. In the VP-treated fungi, lightness was higher, and redness and yellowness lower, than in controls, at all storage times.. In VP-treated mushrooms, strength, hardness and chewiness were significantly higher than in controls, but there were no significant differemces in springiness or cohesiveness. Softening and breakdown of under-cap wrinkles were observed in control mushrooms stored for 30 days, but occurred to a lesser extent in VP-treated fungi. Stipe reticulum tissue vessels in the 30 day-stored VP-treated mushrooms were relatively well-defined and clear, but were softer and diffuse in the control fungi. The results thus confirmed that VP after harvest enhanced mushroom shelf-life and PE packaging prolonged storage time. The data will have industrial applications.

Current Research Trend of Postharvest Technology for Chrysanthemum (국화 수확 후 관리기술의 최근 연구 동향)

  • Kim, Su-Jeong;Lee, Seung-Koo;Kim, Ki-Sun
    • Korean Journal of Plant Resources
    • /
    • v.25 no.1
    • /
    • pp.156-168
    • /
    • 2012
  • Chrysanthemum is a cut flower species that normally lasts for 1 to 2 weeks, in some cases 3-4 weeks. This has been attributed to low ethylene production during senescence. Reduction in cut flower quality has been attributed to the formation of air embolisms that partially or completely blocks the water transport from the vase solution to the rest of the cut flower stem, increasing hydraulic resistance which may cause severe water stress, yellowing, wilting of leaf, and chlorophyll degradation. Standard type chrysanthemum can be harvested when buds were still tightly closed and then fully opened with the simple bud-opening solution. Standard type chrysanthemum can also be harvested when the minimum size of the inflorescence is about 5-6 cm bud which opened into the first flower full-sized flower. While spray varieties can be harvested when 2-4 most mature flowers have opened (40% opening). Cut flowers are sorted by stem length, weight, condition, and so on. Standard chrysanthemum is 80 cm length for standard type and 70cm for spray type. Pre-treatment with a STS, plant regulator such as GA, BA, 1-MCP, chrysal, germicide, and sucrose, significantly improved the vase life and quality of cut flowers. It is well established that vase solutions containing sugar can improve the vase life of cut chrysanthemum. Chrysanthemum is normally packed in standard horizontal fiberboard boxes. Chrysanthemum should normally be stored at $5{\sim}7^{\circ}C$. Precooling resulted in reduction in respiration, decomposition, and transpiration activities as well as decoloration retardation. There was significant difference between "wet" storage in 3 weeks and "dry" storage in 2 weeks. In separate pulsing solution trials, various germicides were tested, as well as PGRs to maintain the green color of leaves and turgidity. Prolonging vase life was attained with the application of optimal solution such as HQS, $AgNO_3$, GA, BA and sucrose. This also retarded senescence in leaves of cut flower stems. Fresh cut chrysanthemum can be transported using a refrigerated van with $5{\sim}7^{\circ}C$. Increasing consumption and usage of cut chrysanthemum of various cultivars would require efficient transport system, and effective information exchange among producer, wholesaler, and consumer.

Nonlinear Modeling and Application of PI Control on Pre-cooling Session of a Carbon Dioxide Storage Tank at Normal Temperature and Pressure (상온 상압의 이산화탄소 저장용 탱크를 위한 예냉과정의 비선형 모델링 및 비례-적분 제어 적용)

  • Lim, Yu Kyung;Lee, Seok Goo;Dan, Seungkyu;Ko, Min Su;Lee, Jong Min
    • Korean Chemical Engineering Research
    • /
    • v.52 no.5
    • /
    • pp.574-580
    • /
    • 2014
  • Storage tanks of Carbon dioxide ($CO_2$) carriers utilized for the purpose of carbon capture and storage (CCS) into subsea strata have to undergo a pre-cooling session before beginning to load cryogenic liquid cargos in order to prevent physical and thermal deterioration of tanks which may result from cryogenic $CO_2$ contacting tank walls directly. In this study we propose dynamic model to calculate the tank inflow of $CO_2$ gas injected for precooling process and its dynamic simulation results under proportional-integral control algorithm. We selected two cases in which each of them had one controlled variable (CV) as either the tank pressure or the tank temperature and discussed the results of that decision-making on the pre-cooling process. As a result we demonstrated that the controlling instability arising from nonlinearity and singularity of the mathematical model could be avoided by choosing tank pressure as CV instead of tank temperature.

Thermal Process Evaluation and Simulation in a Pilot Scale Kimchi Pasteurizer (Pilot Scale 김치순간살균장치(瞬間殺菌裝置)에서의 살균효과분석(殺菌效果分析) 및 Simulation)

  • Gil, Gwang-Hoon;Kim, Kong-Hwan;Chun, Jae-Kun
    • Applied Biological Chemistry
    • /
    • v.27 no.2
    • /
    • pp.55-63
    • /
    • 1984
  • Lethal effect on Chinese radish Kimchi was investigated by using a pilot scale Kimchi pasteurizer. A simulation model was presented so as to predict the change in viable cell concentration of the Kimchi during pasteurization. D values of microorganisms in the Kimchi were found to be 2.21, 1.62, 0.73, 0.39 and 0.21min at 60, 64, 70, 75 and $80^{\circ}C$, correspondingly, and thereby z value was $19^{\circ}C$. One cycle time required was 0.99min at flow rate of 4 l/min. The ratio of lethality in preheating section to total lethality was 0.3 and the ratio of lethality in holding, precooling and cooling sections to total lethality was 0.7. The experimental data were in good agreement with the values simulated by two model equations to which linear and exponential temperature profiles were applied at $65^{\circ}C\;and\;70^{\circ}C$ in holding section.

  • PDF

Microbiological Hazard Analysis for HACCP System Application to fermented milk (발효유류의 HACCP 시스템 적용을 위한 미생물학적 위해 분석)

  • Park, Seong-Bin;Kwon, Sang-Chul
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.16 no.1
    • /
    • pp.438-444
    • /
    • 2015
  • The aim of this research was to apply a HACCP system (Hazard Analysis Critical Control Point) to fermented milk. The main ingredients of fermented milk, work facilities and workers were obtained from a company named YD, which is located in Seobuk-gu, Cheonan-si between November 5 2013 to April 13, 2014. A manufacturing process chart was prepared by referring to the manufacturing process of fermented milk manufacturers in common. The manufacturing process chart was made with raw materials; Raw milk, High Fructose Corn Syrup, Oligosaccharides, Lactic Acid bacteria and Subsidiary ingredients, Warehousing of packaging materials, Storage, Input, Preheating, Mixing, Homogeneity, Sterilization, Precooling, Culture, Filtration, In packaging, Out packaging, Storage, and Consignment, as listed Table 1. The results of the microbiological hazard analysis on the raw materials was safe after sterilization($90^{\circ}C{\pm}5^{\circ}C$, $35{\pm}3min.$) On the other hand,a microorganism test of an environment and workers suggested that the microbiological hazard should be reduced through systematic cleaning and disinfection accompanied by improved personal hygiene based on hygienic education on workers and the management of microorganisms in air.

Current Postharvest Management and Packaging Technology of Strawberries in Korea (국내 딸기의 수확 후 관리와 포장기술 현황)

  • Lee, Seongmin;Park, Insik;Chung, Dae-Sung;Jeong, Cheon Soon;Lee, Youn Suk
    • KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
    • /
    • v.20 no.1
    • /
    • pp.17-24
    • /
    • 2014
  • The purpose of this study was to review the brief physiological characteristics and some factors of the quality decay of strawberry harvested in Korea. Strawberries are highly perishable with soft surface. Surface injury and fungus growth are common as a result of handling and distribution. Many growers and distributers are considered to protect the physical impact and inhibit the fungus growth for prolonging the shelf life in the distribution and market channels. Post-harvest treatments of precooling, carbon dioxide, chlorine dioxide, ozone, and ultrasound are practiced on strawberry in order to extend shelf-life and preserve the quality. Modified atmosphere packaging, edible coating, and oxygen absorbent application can be used as supplemental treatments to extend postharvest-life of strawberry. The packaging types for current domestic and export strawberry in Korea were summarized. The findings from this study can be lead to a better understanding of strawberry packaging development associated with the proper handling and distribution of strawberry. This could be useful for the strawberry growers, distributors, and buyers.

  • PDF