• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1257-1260
• /
• 1996

This paper describes a fully digitalized driver for BLDC motors and the driver is realized by a single chip microprocessor. The speed change can be done by using the signal obtained from the position detecting sensor and adjusting the pulse width at the input channel of power module. In order to verify the effectiveness, an repetitive control method is adopted in the speed control tracking a periodic reference change in the BLDC motor system. The experimental results are shown for the reference tracking accurately according to the design parameter variation in the repetitive controller design.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권2호
• /
• pp.159-167
• /
• 1999

A digital tracking controller is proposed for a precise positioning control under a large repetitive and/or non repetitive disturbances. The proposed control system. Numerical Examples are illustrated for a precise head positioning of optical disk drives regardless of a torque disturbance and/or output disturbance.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권1호
• /
• pp.112-118
• /
• 2000

A modified repetitive control is formulated and analyzed in the discrete-time domain. Sufficient conditions for the stability of a class of repetitive controllers are given by means of the regeneration spectrum method. When a periodic signal input is drived into the two-mass-spring plant, the performance of the proposed controller which comprises a low-pass filter and two feed-forward compensators, turns out highly accurate by comparing the tracking result from the conventional LQ controller.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권6호
• /
• pp.928-934
• /
• 1998

This paper describes a fully digitalized driver for BLDC motors which is realized by a single chip microprocessor. The speed change can be done by using the signal obtained from the position detecting sensor and adjusting the pulse width at the input channel of power module. In order to establish a speed control system a repetitive control method is adopted to track a periodic refer-ence change in the BLDC motor system. The experimental results show accurate reference track-ing performance under the given periodic reference in the repetitive controller design.

• 전자공학회논문지S
• /
• 제35S권3호
• /
• pp.76-85
• /
• 1998

In this paper, a fuzzy tuning method of a control gain in the discrete-time repetitive controller is proposed for precise tracking control of a system whose reference signal is repetitive. The control gain is modified by fuzzy rules which use the magnitude and the variation ofthe maximum output error in the previous repetitive period. The proposed method is applied to a direct drive 2-axis SCARA-type robot and, it is illustratedby computer simulations and real-time experimentation that better performance can be obtained that the fixed gain-based repetitive controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.540-543
• /
• 1997

In this paper, a precise trajectory tracking method for mobile robot using a vision system is presented. In solving the problem of precise trajectory tracking, a hierarchical control structure is used which is composed of the path planer, vision system, and dynamic controller. When designing the dynamic controller, non-ideal conditions such as parameter variation, frictional force, and external disturbance are considered. The proposed controller can learn bounded control input for repetitive or periodic dynamics compensation which provides robust and adaptive learning capability. Moreover, the usage of vision system makes mobile robot compensate the cumulative location error which exists when relative sensor like encoder is used to locate the position of mobile robot. The effectiveness of the proposed control scheme is shown through computer simulation.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권6호
• /
• pp.527-534
• /
• 2016

무궤도 이동랙은 물류센터에서 보관공간효율화를 위해 이용되고 있으며, 궤도가 없이 움직일 수 있는 특징으로 인하여 종래 물류센터에서 레일을 추가하는 등의 바닥공사 없이 용이하게 설치할 수 있다는 장점을 지니고 있다. 그러나 본 이동랙은 왼쪽과 오른쪽 구동부가 별도로 설치되어 있어 독립적으로 동기화 제어를 해야 하는 어려움이 있다. 특히, 화물의 불균형성이 제어 성능에 크게 영향을 미치므로, 강인한 제어기를 기반으로 한 동기화제어가 필요하다. 본 연구에서는 파라미터 변동에 대하여 강인한 강인서보계를 구성하였으며, 내부 및 외부의 동기화제어를 위하여 반복제어기법을 이용한 동기화 제어알고리즘을 제안하였다. 시뮬레이션을 통하여 강인서보계 및 반복제어계의 유효성을 보였으며, 실험에서는 동기화제어기법을 통한 제어의 유효성을 고찰하였다.

• 한국군사과학기술학회지
• /
• 제21권2호
• /
• pp.204-210
• /
• 2018

As the 4th industrial revolution and artificial intelligence technology develop, it is expected that there will be a revolutionary changes in the security robot. However, artificial intelligence system requires enormous hardwares for tremendous computing loads, and there are many challenges that need to be addressed more technologically. This paper introduces precise tracking control technique of autonomous system that need to move repetitive paths for security purpose. The input feedforward signal is generated by using the inverse based iterative learning control theory for the 2 input 2 output nonminimum-phase system which was difficult to overcome by the conventional feedback control system. The simulation results of the input signal generation and precision tracking of given path corresponding to the repetition rate of extreme, such as bandwidth of the system, shows the efficacy of suggested techniques and possibility to be used in military security purposes.

• 한국안전학회지
• /
• 제32권5호
• /
• pp.13-19
• /
• 2017

In this paper, study of vehicle fire cases caused by connector and power wiring of anti-lock brake system(ABS) module damage is presented. The purpose of ABS module is to improve braking and steering ability under sudden stop of the vehicle by repeatedly activating and releasing the brake with electric signal via electric control unit. The electric control unit for ABS may experience incomplete contact between power line and signal line or electrical breakdown on the printed circuit board by undergoing repetitive signal change which would consequently result in electrical heat and spark, eventually leading to automotive fire. Therefore, the purpose of this paper is to provide fundamental data by analyzing connector and power wiring of ABS module damage conducive to the precise investigation on the cause of vehicle fire.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 추계학술대회
• /
• pp.452-455
• /
• 2018

휠로더는 붐과 버켓을 제어하여 굴삭 및 덤핑 작업을 수행한다. 휠로더 장비 운전은 반복 작업이 많고, 작업환경이 열악하지만 오직 사람에 의한 수작업으로 진행되고 있다. 최근 전장품에서도 무인 자동화 시스템을 적용하려는 요구가 점차 증가하고 있다. 휠로더의 자동화 시스템은 안정된 제어를 위해 정확한 각도 검출을 검출이 필수적이다. 본 논문은 노이즈에 강인 하면서 정밀 각도 제어를 위한 신호처리시스템을 제안한다. 제안 시스템을 구현하여 휠로더 붐각도 시스템에 적용한 결과 약 0.1도 각도 변화 검출이 가능하였다.