• Journal of Environmental Health Sciences
• /
• v.35 no.5
• /
• pp.402-410
• /
• 2009

This study was carried out to examine the optimal analytical method for determination of urinary toxic arsenic (inorganic arsenic and its metabolites) by HG-AAS (hydride generation-atomic absorption spectrometry). In the analysis of SRMs (standard reference materials), method E (addition of 0.4% L-cysteine to pre-reductant and use 0.04M HCl as carrier acid) showed the most accurate results compared with the reference values. In the analysis of 30 urinary samples, analytical results were significantly different depend on the component of pre-reductant and the concentration of carrier acid. When the concentration of carrier acid was higher, the analytical result was lower. The recovery rates of MMA (monomethylarsonic acid) and DMA (dimethylarsenic acid) were varied by the concentration of pre-treatment acid and carrier acid and hydride generation reagents. When the concentration of carrier acid was 1.62 M (5% HCl), the recovery rates of DMA was 1%. The recovery rates of MMA and DMA in method E (=V) were 102% and 100%, respectively. The results of this study suggest that the component and concentration of pre-reductant and carrier acid must be carefully adjusted in the analysis of urinary arsenic, and method E is recommendable as the most precise analytical method for determination of urinary toxic arsenic.

• Journal of Korean Society on Water Environment
• /
• v.20 no.2
• /
• pp.110-119
• /
• 2004

The combination of biological and physical/chemical technologies is a promising technique to reduce highly concentrated pollutants in livestock wastewater. It is suggested to treat livestock wastewater efficiently as follows: firstly, biodegradable organic matters, nitrogen and some of phosphorus should be removed by a biological treatment process and then residual non-biodegradable organic matters, color and phosphorus be eliminated by physicochemical technologies. In this study, therefore, the integrations of chemical coagulation, activated carbon adsorption, Fenton oxidation and ozonation were evaluated to provide appropriate post-treatment processes for biologically pre-treated livestock wastewater. After chemical coagulation followed by ozonation or Fenton oxidation process, the quality of treated wastewater could meet the discharge limit in Korea. However, a yellowish brown color still remained in the treated wastewater after a single method such as coagulation and Fenton oxidation was applied. The ozonation was found to be the most effective technology for the decolorization. Neither simple biological nor physicochemical treatment provides adequate decolorization and sufficient depletion of organics in livestock wastewater so far. Consequently, the integration of Fenton oxidation and ozonation with a biological treatment process is recommended to treat livestock wastewater in terms of removal efficiency.

• The Journal of Korean Physical Therapy
• /
• v.21 no.3
• /
• pp.17-24
• /
• 2009

Purpose: The purpose of this study was to investigate the effects of a combination of isotonic (CI) technique on the balance, muscle fatigue and muscle activities of the quadriceps muscle in the paretic leg of hemiplegic patients. Method: All the subjects received a combined isotonic technique of proprioceptive neuromuscular facilitation (PNF) for about 30 minutes 3 times per week for 6 weeks. The root mean square (RMS) and mid frequency (MF) were recorded by surface electromyography (EMG)(EMG/EP system, OXFORD Medelec, UK) during maximal voluntary isometric contractions (MVIC). The balance ability was measured by a balance system (BIODEX, USA). Result: The RMS of the quadriceps muscle at post-treatment was significantly increased compared to that at pretreatment (p<0.05). Yet there was no significant difference among the three muscles. There were no significant difference in the MF of the vastus lateralis and rectus femoris between pre- and post-treatment, but the MF of the vastus medialis was significantly decreased (p<0.05). There was a significant difference in the vastus medialis and lateralis between pre- and post-treatment (p<0.05). Moreover, the overall stability index at post-treatment was significantly decreased compared to that at pre-treatment (p<0.05). But there was no significant difference between the anterior/posterior and medial/lateral stability indexes. Conclusion: The results of this study indicated that a CI technique of PNF had an effect to improve the balance and muscle activity in hemiplegic patients.

• Asian Oncology Nursing
• /
• v.3 no.1
• /
• pp.5-14
• /
• 2003

The purpose of this study was to identify key educational and counseling needs of breast cancer patients in Korea. The data were collected from 102 breast cancer survivors. The instrument consisted of 66 items and the items were divided into five treatment stages: pre-admission, admission, discharge, chemotherapy, and radiation therapy. The subjects' mean age was 50 years and most of them were housewives. All had a mastectomy and among them 69 had chemotherapy and 42 had radiation therapy. Average post-surgical period was 47 months. The mean score of the subjects' needs was 2.99 out of 4 points. The highest educational need was to know about the method of recurrence prevention. In terms of the treatment stages, mean score for pre-admission was 3.09, admission 3.06, chemotherapy 3.03, after discharge 2.95, and radiation therapy 2.80. In the pre-admission period, etiology, diagnostic tests, treatment and prevention of the breast cancer were needed the most. During the admission period, symptom management after the operation had the highest score. After discharge, prevention of recurrence had the highest score. The results of this research will help in developing educational and counseling programs by understanding the specific needs of breast cancer patients based on the treatment stages.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.2
• /
• pp.119-128
• /
• 2023

This study was examined for investigating the quality changes of spring kimchi cabbage under various treatments (pre-drying/pre-cooling, packaging types, and stacking and loading in container and pallete in the storage room) during cold storage. The results showed that control (upward stacking without pre-drying/pre-cooling and HDPE or PVC film cover) was increased significantly in weight loss and trimming loss, compared to other treatments such as DPDH (downard stacking + pre-drying + HDPE), DPDP (downard stacking + pre-drying + PVC), DPCH (downnard stacking + pre-cooling + HDPE), and UPCH (upward stacking + pre-cooling +HDPE) during storage for three months. In Sensory evaluation, judging from marketable properties, the desirable appearance of spring kimchi cabbage with the modified pallet-unit MA packed, PE, and PVC film wrapping could be maintained until 9 weeks after pre-drying/pre-cooling. Meanwhile, the control without any treatments after 6 weeks, the sensory score was declined, significantly. In general, the low temperature (10℃ and 2℃) of pre-treatment with combination of plastic film packaging in spring kimchi cabbage storage could inhibit the physiological activity and reduce the direct exposure of environmental cold air in the storage. Therefore, these two variables were the key points for extending the shelf-life of spring kimchi cabbage.

• Korean Journal of Applied Biomechanics
• /
• v.30 no.1
• /
• pp.63-72
• /
• 2020

Objective: The purpose of this study was to investigate meta-analysis on the effects of exercise therapy and physiotherapy on pain in korean patients with chronic low back pain. Method: Meta-analysis was performed on the type and method of treatment. A total of 23 experimental studies were coding into 31 individual studies, into types, methods, visual analogue scale (VAS), each pre/post value of the effect size was calculated by meta-analysis. Results: Sling exercise, stretching, thermal therapy, kinesio-taping, lumbar stabilization exercise, electrotherapy is large effect size (ES ≥ .08). In addition, big effects occurred in order of treatment period is more than 9 weeks, three times a week. Conclusion: Our results indicated that persistent treatment of chronic back pain is the most effective method of self-sufficiency rather than temporary relief.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.4
• /
• pp.37-43
• /
• 2014

The crystallinity and molecular weight of cotton linter need to be controlled to be more easily dissolved in NMMO during manufacture of clothing fabrics. Electron beam irradiation and sulfuric acid treatment were used as pre-treatment to reduce molecular weight of cotton linter more efficiently, and after the pre-treatment, peroxide bleaching was followed in alkaline condition. After those processes, the crystalline indices of the cotton linters were measured by XRD method, and other properties such as their alpha cellulose contents and degree of polymerization were measured. It was found that the crystallinity index of cotton linter was decreased as the irradiation of electron beam increased while increased as the dose of sulfuric acid increased. These results strongly suggested that electron beam damaged the crystalline structure of the cellulose directly while sulfuric acid dissolved mostly non-crystalline area of the cellulose structure.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.4
• /
• pp.525-531
• /
• 2007

The operating temperature has been increased to improve the efficiency of gas turbine. The most advanced Gas turbine is operated at above $1,500^{\circ}C$. Improvement in material and cooling method permit hot gas path component to run at increased temperature. But, the repair of blades which are developed with advanced manufacture technique is difficult to use normal welding. Most of gas turbine blades are made of precipitation harden nickel base superalloy, which is very hard to weld. Therefore, the employment of welding filler on blade is solid solution nickel base superalloy(Hastelloy X, Inconel 617). In this study, Tensile test in high temperature was conducted on welded GTD111DS with GTD111 to evaluate effect of variation of pre, post treatment. The result of this study showed that the specimen was treated with optimum pre and post treatment(preweld HT($1200^{\circ}C$), Post treatment($1100^{\circ}C$ HIP, $1200^{\circ}C$ + $1100^{\circ}C$ + $800^{\circ}C$ HT) is mush superior.

• Applied Science and Convergence Technology
• /
• v.25 no.6
• /
• pp.149-153
• /
• 2016

Thermal oxidation has significant potential for use in synthesizing metal-oxide nanostructures from metallic materials. However, this method has limited applicability to the synthesis of multi-morphology NiO from Ni foil. Techniques consisting of mechanical and chemical approaches were used to pre-treat the Ni foil (prior to oxidation) to promote the formation of nanowires and nanoplates on the NiO layer. These morphologies were realized on the Ni foils scratched by sand paper and a knife, respectively, and subsequently heat-treated at $500^{\circ}C$ for 24 h. Small nanowires (diameter: <10 nm) formed on the Ni foil treated by absolute $HNO_3$ and then oxidized at $500^{\circ}C$ for 24 h. The formation of various morphologies (on the pre-treated Ni foil), which differ from that formed in the case of pristine Ni foil after oxidation, may be attributed to the surface melting phenomenon that occurs during the nucleation process.

• Journal of the Korean Professional Engineers Association
• /
• v.42 no.6
• /
• pp.47-52
• /
• 2009

According to increasing demand of water mainly due to the growth of population and increased water consumption, many countries either face or worry about the shortage of fresh water. Proportionately, importance and efforts of each country to develop the potable water has been gradually increasing as well. Among others, desalination of seawater has been developed to one of the solutions mainly from the middle east and other arid regions to produce large quantity of fresh water from seawater. We installed beach seawater collector wells to develop the filtered seawater supply for desalination in a refinery. We came to a conclusion that the beach seawater collector well is one of the recommendable alternatives of seawater pre-treatment for desalination applications with lower operating cost and higher efficiency.