Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Mechanical Properties for Welding Part on Ni Base Superalloy Material According to Heat Treatment Parameters

열처리조건에 따른 Ni기지 초합금 용접부의 기계적 특성

  • 양성호 (한전KPS(주) GT정비기술센터) ;
  • 박상열 (한전KPS(주) GT정비기술센터) ;
  • 최희숙 (한전KPS(주) GT정비기술센터) ;
  • 고원 (한전KPS(주) GT정비기술센터) ;
  • 채나현 (한전KPS(주) GT정비기술센터) ;
  • 김문영 (한전KPS(주) GT정비기술센터)
  • Published : 2007.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

The operating temperature has been increased to improve the efficiency of gas turbine. The most advanced Gas turbine is operated at above $1,500^{\circ}C$. Improvement in material and cooling method permit hot gas path component to run at increased temperature. But, the repair of blades which are developed with advanced manufacture technique is difficult to use normal welding. Most of gas turbine blades are made of precipitation harden nickel base superalloy, which is very hard to weld. Therefore, the employment of welding filler on blade is solid solution nickel base superalloy(Hastelloy X, Inconel 617). In this study, Tensile test in high temperature was conducted on welded GTD111DS with GTD111 to evaluate effect of variation of pre, post treatment. The result of this study showed that the specimen was treated with optimum pre and post treatment(preweld HT($1200^{\circ}C$), Post treatment($1100^{\circ}C$ HIP, $1200^{\circ}C$ + $1100^{\circ}C$ + $800^{\circ}C$ HT) is mush superior.

Keywords

References

  1. Kim, M. Y., Park, S. Y. and Yang, S. H., 2006, 'Properties Variation According to Heat Treatment for Gas Turbine Blade(Bucket) Material of GTD-111DS,' Trans. of the KSME (A), Vol. 30, No. 3, pp. 349-355 https://doi.org/10.3795/KSME-A.2006.30.3.349
  2. Lim, L. C., Yi, J. Z., Liu, N. and Ma, Q., 2002, 'Mechanism of Post-Weld Heat Treatment Cracking in Rene 80 Nickel Based Superalloy,' Materials Science and Technology, Vol 18, pp. 407-412 https://doi.org/10.1179/026708302225001633
  3. Sajjadi, S.A., Zebarjad, S.M., Guthrie, R.I.L and Isac, M., 2005, 'Microstructure Evolution of High Performance Ni Base Superalloy GTD 111 With Heat Treatment Parameters,' Journal of material processing technology, Vol. 175, Issues 1-3, pp. 376-381 https://doi.org/10.1016/j.jmatprotec.2005.04.021
  4. Choi, B. G., Kim, I. S. and Jo, C. Y., 'Effect of Thermal Exposure on Microstructural Degradation and Mechanical Properties of Ni Base Superalloy GTD 111,' Proceeding of the 6th International Charles Parsons Turbine Conference. pp. 861-879
  5. Viswanathan, R., 2001, 'Gas Turbine blade Superalloy Material Properties Hand Book,' EPRI(TR1004652), pp. 17-1-17-16