• 한국염색가공학회지
• /
• 제23권3호
• /
• pp.169-178
• /
• 2011

The purpose of this study is to develop eco-printing method using natural dyes combined with chitosan treatment to impart various pattern effect on cotton fabric. It was examined whether tone-on-tone pattern effects could be produced by screen printing with chitosan paste and subsequently dip-dyed in natural dye bath. For polychromic colorants, fabrics were pre-mordanted and then screen printed with chitosan, while only chitosan printing treatment was applied for monochromic colorants. Color, dye uptake, washing, light and rubbing fastnesses of printed fabrics were measured in relation to the presence of chitosan printing. Pre-mordanting and chitosan printing treatment were applied to such polychromic colorants as madder, sappanwood, onion and cochineal. Also, printing pattern formation on fabrics was evaluated by differences in dye uptake and color. The results suggested that madder, onion and cochineal were effective on pattern formation. Regarding sappanwood, since dye uptake was increased only by pre-mordanting without chitosan printing treatment, there was little color difference and thus patterns were not clearly distinguished. Chitosan printing treatment tended to increase washing, light and rubbing fastnesses of dyed fabrics with polychromic colorants. Chitosan printing treatment was applied to monochromic colorants such as chlorophyll, gardenia and indigo and the effect of printing formation was examined according to the difference in dye uptake. Among monochromic dyes tried, chlorophyll was effective and chitosan printing improved washing and light fastnesses.

• 한국염색가공학회지
• /
• 제20권6호
• /
• pp.35-41
• /
• 2008

This study investigated the dyeing properties of silk fabrics with Annatto. The dye stuff was extracted by distilled water at $60^{\circ}C$, 10minutes, 1:100 of bath ratio. Dyeability(K/S) and color fastness of silk fabrics were tested under conditions of various concentrations, time, temperature, repeat-numbers of dyeing, pH, mordants variables and methods of mordanting. The highest absorbance was found in methanol extract of Annatto. The optimum dyeing concentration, time and temperature of silk fabrics with Annatto were 25%(o.w.f.), 60min and $60^{\circ}C$ respectively. The K/S value showed higher in post-mordanting than in pre-mordanting, and especially post-Fe mordant showed highest K/S value. In the case of colorfastness, Cu-mordanted fabrics were good washing fastness. Dry cleaning fastness appeared 4-5 grades and light fastness showed lowest grade.

• 대한가정학회지
• /
• 제43권7호
• /
• pp.109-116
• /
• 2005

Using buffer solutions, consisting of pH 4, 5, 6, 7, and 8, silk fiber fabric specimens, pre-mordanted with one of the mordanting agents, Sn, Al, Cu, Cr, and Fe, were dyed using cochineal dyestuff. The color of the dyed silk fabric specimens was predominantly red(R) for the acidic range of pH 4 and 5, and predominantly purple(RP) for the neutral range of pH 6,7, with 8, with the pH boundary differentiating between the shades being between pH 5 and 6. As a general trend, the chroma value decreased as the pH changed from acid to alkali, and the highest chroma value us attained between pH 4 and 5. Regardless of the mordanting conditions, the trend was that $ {\Delta}E$ showed the highest measured value in the acidic range of pH 4 and 5, and it dropped abruptly after the pH 6.

• 한국의류학회지
• /
• 제35권3호
• /
• pp.336-346
• /
• 2011

Dyeing properties of protein fiber with bamboo colorants were studied by investigating the effect of dyeing conditions such as dye concentration, dyeing temperatures, times on dye uptakes, effect of mordants, and color change. The various colorfastness of dyed fabrics were evaluated for practical use. In addition, the antimicrobial ability, ultraviolet-cut ability, and deodorant ability were estimated. The dye uptake increased as the dyeing concentration increased. Bamboo colorants showed relatively good affinity to protein fiber and produced a yellow color. Dye uptake increased as the dyeing time and temperature increased. Post-mordanting was more effective than pre-mordanting. Mordants, Fe and N.Fe, were effective for increasing dye uptake. The color of fabric mordanted with Cu and N.Cu changed to GY. Colorfastness of dyed fabrics showed a relatively good rating, and mordanting had no significant effect on colorfastness. Dyed silk fabric showed very good antimicrobial abilities of 99.9%. Also, ultraviolet-cut ability and deodorant ability were improved in silk fabric dyed with bamboo extracts.

• 패션비즈니스
• /
• 제20권5호
• /
• pp.76-86
• /
• 2016

In this research, the dyeing properies of Amur cork tree on sheep leathers were evaluated. The proper dyeing conditions were identified with K/S values depending on the colorant concentration, dyeing time, dyeing temperature and dye bath pH. For the proper conditions, the changes of color for different mordants(Al, Cu and Fe) were observed as $L^*a^*b^*$ coordinates and H V/C values. The color fastnesses were also examined, and the antimicrobial properties were examined. The results were as follows: For the sheep leather, the optimized dyeing conditions were 300% o.w.f., 40 min., $40^{\circ}C$, and pH 5. The leather color was yellow in the dyeing and mordanting. Although the $L^*a^*b^*$ changed with the mordants and mordanting methods, the overall hue was yellow. The colorfastness to light was reduced compared to original(untreated) sheep leather. The rubbing fastness was generallry satisfactory as 4-5 rating. The dry-cleaning fastness(stain) of leathers were generally at the 4-5 level, but dry-cleaning fastness(fade) was a little reduced compared to original sheep leather. The dyed and pre-mordanted and dyed sheep leather showed excellent antimicrobial properties.

• 복식문화연구
• /
• 제13권2호
• /
• pp.248-254
• /
• 2005

In this study, wool fabric specimens were pre-mordanted using Sn, Al, Cu, Cr, and Fe, and subsequently dyed using cochineal, maintaining the pH of the dye bath constant using pH buffer solutions of 4, 5, 6, 7, and 8. In the case of wool fabric specimen, regardless of the type of mordanting agents, peak dye-uptake amount was obtained at the acidic region, pH 4, and above pH 6, the dye-uptake amount decreased remarkably. Differing from the cotton fabric case, the dyed wool fabric specimen exhibited red shade even in the case of non-mordanting, at the region of pH values of 4 and 5. It is presumed that in the acidic dye bath the effect of cationic amine group present in the structure of wool fiber molecules took place. The amount of color difference, among the mordanting agents, due to the increase of pH value, was highest for the Fe mordanting case. It seems, therefore, that the Fe mordanting is affected most by the pH value.

• 한국염색가공학회지
• /
• 제29권2호
• /
• pp.62-68
• /
• 2017

Coffee sludge and onion shells are known typically as waste resources as well as simultaneously being the raw material for dye having a golden brown color. This research studies the dyeability, functionality, and colors of woolen fabric after being dyed by different dyeing method using coffee sludge and onion shells extract. The woolen fabric was refined and pre-mordanted with tannin. The dyeing process conducted was single-dye, using coffee sludge and onion shells extract, sequential multi-dye, consecutively dyeing with coffee sludge and onion shells, and mixed-dye, blending coffee sludge extract and onion shells extract to dye. The dyeing was measured on the surface color, color fastness, and UV-protection ability. As a result, the expression of various hues of tan using coffee sludge and onion shells extract were shown to be possible. Additionally, single-dye, sequential multi-dye, mixed-dye had generally superiority in color fastness to light, all rating 3 and color fastness to washing, rating 3 or 4, showing relatively stable color fastness to washing. The UV protection ability was shown to be better, especially appearing satisfactory in the UV-B protection, all measured to be over 90%.

• 한국의류학회지
• /
• 제36권3호
• /
• pp.324-334
• /
• 2012

In this research, the dyeing properties of $Lycopus$ $lucidus$ Turcz on cotton and silk fabrics were evaluated to establish a scientific database of natural dyes. The optimum dyeing conditions were identified with K/S values depending on the dyeing concentration, temperature, time, and pH. For the optimum conditions, the color changes for different synthetic mordants were observed as L, $a^*$, $b^*$ and H, V, C. The color fastness after dyeing and mordanting was also examined. Additionally, the antibiosis of $Lycopus$ $lucidus$ Turcz was examined. The results were as follows: For the cotton, the optimized dyeing conditions were 300% (o.w.f.), $50^{\circ}C$, 40 min., and pH 5. For the silk fabric, the conditions were 450% (o.w.f.), $70^{\circ}C$, 60 min., and pH 4. The K/S value of dyed cotton improved about 1.03-2.78 folds after mordanting. The fabric color was yellow in the absence of mordanting, while it was reddish yellow after post-mordanting with FFC. Although the color changed with the mordanting method and mordant, the overall hue was yellow. Thus, $Lycopus$ $lucidus$ Turcz appears to have the potential for use as a natural dyeing material for a yellow hue. The K/S value of the dyed silk fabric improved about 1.05-1.40 folds after mordanting. The fabric showed a reddish yellow color when pre-mordanted with Al and Cu. The washing and dry-cleaning fastness of the cotton and silk fabrics were at the 4-5 level. The light fastness of the cotton improved after mordanting; however, pre-mordanting was more effective than post-mordanting or the absence of mordanting. The dyed cotton, silk fabrics showed excellent antibiosis.

• 한국의류학회지
• /
• 제28권12호
• /
• pp.1625-1631
• /
• 2004

개망초로부터 추출한 색소의 면 섬유에 대한 염색성을 조사하였다. 염색조건과 매염처리가 염착량(K/S값)및 CIELAB 색상에 미치는 영향을 평가하였으며, 또한 염색한 시료의 견뢰도를 측정하여 실용성을 확인하였다. 개망초 색소의 면 섬유에 대한 친화력은 높지 않았으며, Freundlich형의 등온흡착곡선을 보여 염착이 주로 수소결합에 의해 이루어지는 것으로 나타났다. 동시 또는 후매염처리 방법보다는 전매염처리 방법이 염차량 증진에 더 효과적이었으나, 주석매염제를 제외하고 매염제에 의한 염착량 증진효과는 크지 않았다. 매염처리에 관계없이 모든 시료는 Y계열의 색상을 나타내어 큰 변화는 없었다. 모든 시료의 세탁견뢰도는 낮았으며 , 땀 및 마찰견뢰도는 매우 양호하였으며 매염 처리가 견뢰도 증진에 미치는 영향은 크지 않았다.

• 한국의류학회지
• /
• 제37권7호
• /
• pp.874-881
• /
• 2013

Dansam (Salvia miltiorrhiza Bunge) is a perennial plant that belongs to the Labiatae family and is characterized by red pigment found in the epidermis of its roots. Research on the dyeability of Dansam extract was performed with repeated trials under various conditions such as temperature, time, and mordant treatment. Silk fabrics were dyed with Dansam extract and mordanted with various agents such as Al, Fe, Cu, and Sn to evaluate the dyeability and functionality of Dansam extract; subsequently, the K/S value and the change of surface color were analyzed using a colorimeter. In addition, the dyeability of dyed fabrics (such as color fastness to washing, dry cleaning fastness, rubbing fastness and light fastness) and functionality (such as antibacterial activity and deodorization) were analyzed. The surface colors of all dyed fabrics were recorded and the results showed the presence of mostly YR series of colors; in addition, a GY color series appeared in the Fe pre-mordants of the silk fabric. The highest K/S values were recorded in Fe post-mordants. The washing fastness were Level 3 and Level 4; in addition, the dry-cleaning fastness showed excellent results at Level 4 and Level 5. The rubbing fastness was satisfactory at Level 3 and Level 4 and the light fastness was satisfactory at Level 4. The results of the measurements (that pertained to the antibacterial activity of fabrics dyed with Dansam extract) showed a 99.9% bacteria reduction rate of Staphylococcus aureus and Klebsiella pneumoniae. In regards to deodorization ability, dyed fabrics were found to have higher deodorization rates than those not dyed. The dyed fabric demonstrated exceptional deodorization qualities.