• Korean Journal of Weed Science
• /
• v.6 no.2
• /
• pp.154-161
• /
• 1986

Since herbicide damage has been occurred in subirrigated rice seedbed in Korea, the use of crop safener is required to reduce crop injury. Field studies were conducted to evaluate safening effect of 1,8-naphthalic anhydride (NA) and CGA 123'407 (4, 6-dichloro-2-phenyl-pyrimidine) against four kinds of paddy herbicides applied to subirrigated vinyl-covered rice seedbed. NA as a seed dressing at 0.5% (W/W) was effective in reducing rice injury from butachlor, pretilachlor, chlormethoxynil and benthiocarb, and increased number of seedling established, plant height, and dry weight of rice seedlings, while growth inhibition and stand loss were observed at 1% NA. Pretilachlor slightly decreased number of seedlings established and inhibited growth of rice seedlings. But pre-mix combination of pretilachlor (2%) and CGA 123'407 (0.5%) reduced rice injury caused by pretilachlor alone and increased number of seedlings established and dry weight of rice seedlings. The results indicate that NA and CGA 123'407 would permit the safe application of butachlor, pretilachlor, chlormethoxynil, and benthiocarb in subirrigated rice seedbed.

• Management & Information Systems Review
• /
• v.7
• /
• pp.401-426
• /
• 2001

The form of company divides private and coporate companies. In general. private company has direct connection with owner's fortunes. On the contrary, cooperate company is established by a group of people who invest capital funds on their company and has an independent character. In the case of private company, their are many merits that owner can obtain all the benefits without divisions. However, the owner can mix up the control of accounting between public and private matters. As a result confusing, it is difficult to estimate financial situation of company and is limited to fund supply. Futhermore, owner has unlimited liabilities with law credit as a social cognition. Especially, the government tries to induce conversion of private company into cooperation one on the basis of benefits of tax and so on. In those situations, the purpose of this thesis is to study the management benefits with the conversion of private company into cooperate one focucing on the related tax reduction effect. To do this, I have reviewed all of the related textual achievements and tested the real significancy of tax reduction effect of conversion empirically. Finally, I have concluded that the conversion of private company into coporate one has many benefits including significant tax reduction effect. In other side, I have considered and reviewed many difficulties related conversion privated company into cooperate one and suggested some improvements as results. This thesis is comprises 5 chapters as follows; The first chapter explains purposes and methodologies and extents of this study. The second chapter deals the theoretical basis of conversion of private company into cooperate one and cooperates diverse benefits and types and processes of conversion. The preceding research achievements are also reviewed in this chapter. The third chapter deals empirical testing on the real tax reduction effect of the conversion. The analysis is proceeded through t-test of difference of tax between pre and after conversion. The result is presented so positively that I can conclude that cooperate conversion of private company has real benefit of tax reduction. The forth chapter deals the difficulties and improvements related with conversion. They are considered and reviewed at various aspects such as practical, financial and tax aspect. In fifth chapter, I summarise all of the significant points of this study and have conclusions in various aspects at last. In final point, this study is not enough in sample numbers and sample collecting area for empirical testing of significant tax reduction effect of cooperate conversion and research of more foreign achievements. Those are remained as continuing future studies.

• Journal of the Korean Geosynthetics Society
• /
• v.20 no.4
• /
• pp.19-32
• /
• 2021

In this study, evaluation and consideration of domestic/overseas design, construction, and quality control performed by the authors on the deep cement mixing method were performed, and improvements for the development of the DCM method were suggested in the future. As a result of this study, it was found that the cross-sectional area correction for strength is required during the laboratory test of mix proportion, and caution is required because the extrapolation method may lead to different results from the actual one. Applicable design methods should be selected in consideration of both the improvement ratio and the type of improvement during design, and it was confirmed that the allowable compressive strength to which the safety factor was applied refers to the standard value for stability review and not the design parameters. In the case of the stress concentration ratio, rather than applying a conventional value, it was possible to perform economical design by calculating the experimental and theoretical stress concentration ratio reflecting the design conditions. In the case where pre-boring is expected during construction, if the increased water content is not large compared to the original, there were cases where a major problem did not occur even if the result that did not consider the increase in water content was used. In addition, it was confirmed that when the ratio of the top treatment length to the improved length is high, a small amount of design cement contents per unit length can be injected during construction. In the case of quality control, it was evaluated that D/4~2D/4 for single-axis and D/4 point for multi-axis were optimal for coring of grouting mixtures. As an item for quality control, it is judged that the standard that considers the TCR along with the unconfined compressive strength of grouting mixtures is more suitable for the domestic situation.

• Journal of the Korean Electrochemical Society
• /
• v.24 no.4
• /
• pp.77-92
• /
• 2021

The energy density of lithium-ion batteries (LIBs) determines the mileage of electric vehicles. For increasing the energy density of LIBs, it is necessary to develop high-capacity active materials that can store more lithium ions within constrained weight. The rapid progress made in cathode technology has realized the utilization of the near-theoretical capacity of cathode materials. In contrast, commercial LIBs have still exploited graphite as active material in anodes since the 1990s. The most promising way to increase anodes' capacity is to mix high-capacity and long-cycle-life silicon oxides (SiOx) with graphite. However, the low initial Coulombic efficiency (ICE) of SiOx limits its content below 15 wt%, impeding the capacity increase in anodes. To address this issue, various prelithiation techniques have been proposed, which can improve the ICE of high-capacity anode materials. In this review paper, we introduce the principles and expected effects of prelithiation techniques reported so far. According to the reaction mechanisms, the strategies are categorized. Mainly, we focus on the recent progress of solution-based chemical prelithiation methods with commercial viability, of which lithiation reaction occurs homogeneously at liquid-solid interfaces. We believe that developing a cost-effective and mass-scalable prelithiation process holds the key to dominating the anode market for next-generation LIBs.

• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.1029-1036
• /
• 2024

Drawing on the deep experience and understanding of the principles of nuclear safety, as well as many years of nuclear power plant design and operation, the EDF led NUWARD SMR Project is developing a design for a Small Modular Reactor (SMR) of 340 MWe composed of two 170 MWe independent units, that will supplement the offering of high-output nuclear reactors, especially in response to specific needs such as replacement of fossil-fuelled power plants. NUWARD SMR is a mix of proven and innovative design features that will make it more commercially competitive, while integrating safety features that comply with the highest international standards. Following the principles of redundancy and diversity and rigorous application of Defence in Depth (DID), with an international view on nuclear safety licensing, the Project also incorporates new safety approaches into its design development. The NUWARD SMR Project has been in development for a number of years, it entered conceptual design formally in mid-2019 and entered Basic Design in 2023. The objective of the concept design phase was to confirm the project technological choices and to define the first design configuration of the NUWARD SMR product, to document it, in order to launch pre-licensing with the French Safety Authority (ASN) and to define its estimated cost and its subsequent development and construction schedules. As a delivery milestone the Safety Options file (called the Dossier d'Options de Sûreté (DOS)) has been submitted to ASN in July 2023 for their opinion. An integral part of the NUWARD SMR Project, is not only to deliver a design suitable for France and to satisfy French regulation, but to develop a product suitable and indeed desirable, for the international market, with a first focus in Europe. In order to achieve its objectives and realise its market potential, the NUWARD SMR Project needs to define and realise its safety approach within an international environment and that is the key subject of this paper. The following paper: • Summarises the foundation principles and technological background which underpin the design; • Contextualises the key design features with regard to the international safety regulatory framework with particular emphasis on innovative passive safety aspects; • Illustrates the Project activities in preparation for first licensing in France, and also a wider international view via the ASN led Joint Early Review of the NUWARD SMR design, including Finnish and Czech Republic regulators, recently joined by the Swedish, Polish and Dutch regulators; • Articulates the collaborative approach to design development from involvement with the Project partners (the Commissariat à l'énergie atomique et aux énergies alternatives (CEA), Naval Group, TechnicAtome, Framatome and Tractebel) to the establishment of the International NUWARD Advisory Board (INAB), to gain greater international insight and advice; • Concludes with the focus on next steps into detailed design development, standardisation of the design and its simplification to enhance its commercial competitiveness in a context of further harmonisation of the nuclear safety and licensing requirements and aspirations.

• Journal of Global Scholars of Marketing Science
• /
• v.19 no.4
• /
• pp.44-56
• /
• 2009

Impulse purchasing is defined as an immediate purchase with no pre-shopping intentions. Previous studies of impulse buying have focused primarily on factors linked to marketing mix variables, situational factors, and consumer demographics and traits. In previous studies, marketing mix variables such as product category, product type, and atmospheric factors including advertising, coupons, sales events, promotional stimuli at the point of sale, and media format have been used to evaluate product information. Some authors have also focused on situational factors surrounding the consumer. Factors such as the availability of credit card usage, time available, transportability of the products, and the presence and number of shopping companions were found to have a positive impact on impulse buying and/or impulse tendency. Research has also been conducted to evaluate the effects of individual characteristics such as the age, gender, and educational level of the consumer, as well as perceived crowding, stimulation, and the need for touch, on impulse purchasing. In summary, previous studies have found that all products can be purchased impulsively (Vohs and Faber, 2007), that situational factors affect and/or at least facilitate impulse purchasing behavior, and that various individual traits are closely linked to impulse buying. The recent introduction of new distribution channels such as home shopping channels, discount stores, and Internet stores that are open 24 hours a day increases the probability of impulse purchasing. However, previous literature has focused predominantly on situational and marketing variables and thus studies that consider critical consumer characteristics are still lacking. To fill this gap in the literature, the present study builds on this third tradition of research and focuses on individual trait variables, which have rarely been studied. More specifically, the current study investigates whether impulse buying tendency has a positive impact on impulse buying behavior, and evaluates how consumer characteristics such as the need for cognitive closure (NFCC), psychological wellbeing, and susceptibility to interpersonal influences affect the tendency of consumers towards impulse buying. The survey results reveal that while consumer affective impulsivity has a strong positive impact on impulse buying behavior, cognitive impulsivity has no impact on impulse buying behavior. Furthermore, affective impulse buying tendency is driven by sub-components of NFCC such as decisiveness and discomfort with ambiguity, psychological wellbeing constructs such as environmental control and purpose in life, and by normative and informational influences. In addition, cognitive impulse tendency is driven by sub-components of NFCC such as decisiveness, discomfort with ambiguity, and close-mindedness, and the psychological wellbeing constructs of environmental control, as well as normative and informational influences. The present study has significant theoretical implications. First, affective impulsivity has a strong impact on impulse purchase behavior. Previous studies based on affectivity and flow theories proposed that low to moderate levels of impulsivity are driven by reduced self-control or a failure of self-regulatory mechanisms. The present study confirms the above proposition. Second, the present study also contributes to the literature by confirming that impulse buying tendency can be viewed as a two-dimensional concept with both affective and cognitive dimensions, and illustrates that impulse purchase behavior is explained mainly by affective impulsivity, not by cognitive impulsivity. Third, the current study accommodates new constructs such as psychological wellbeing and NFCC as potential influencing factors in the research model, thereby contributing to the existing literature. Fourth, by incorporating multi-dimensional concepts such as psychological wellbeing and NFCC, more diverse aspects of consumer information processing can be evaluated. Fifth, the current study also extends the existing literature by confirming the two competing routes of normative and informational influences. Normative influence occurs when individuals conform to the expectations of others or to enhance his/her self-image. Whereas informational influence occurs when individuals search for information from knowledgeable others or making inferences based upon observations of the behavior of others. The present study shows that these two competing routes of social influence can be attributed to different sources of influence power. The current study also has many practical implications. First, it suggests that people with affective impulsivity may be primary targets to whom companies should pay closer attention. Cultivating a more amenable and mood-elevating shopping environment will appeal to this segment. Second, the present results demonstrate that NFCC is closely related to the cognitive dimension of impulsivity. These people are driven by careless thoughts, not by feelings or excitement. Rational advertising at the point of purchase will attract these customers. Third, people susceptible to normative influences are another potential target market. Retailers and manufacturers could appeal to this segment by advertising their products and/or services as products that can be used to identify with or conform to the expectations of others in the aspiration group. However, retailers should avoid targeting people susceptible to informational influences as a segment market. These people are engaged in an extensive information search relevant to their purchase, and therefore more elaborate, long-term rational advertising messages, which can be internalized into these consumers' thought processes, will appeal to this segment. The current findings should be interpreted with caution for several reasons. The study used a small convenience sample, and only investigated behavior in two dimensions. Accordingly, future studies should incorporate a sample with more diverse characteristics and measure different aspects of behavior. Future studies should also investigate personality traits closely related to affectivity theories. Trait variables such as sensory curiosity, interpersonal curiosity, and atmospheric responsiveness are interesting areas for future investigation.

• Journal of Preventive Medicine and Public Health
• /
• v.25 no.1 s.37
• /
• pp.88-100
• /
• 1992

This study was conducted to assess the effects of implementation of the patient referral system started July 1st, 1989. A comparison on the pattern of outpatient services of the Departments of Internal Medicine, General Surgery, and Pediatrics at the Yeungnam University Hospital was conducted for each one year period before and after implementation of the patient referral system. The pre-implementation period was from July 1, 1988 to June 30, 1989 and the post-implementation period was from July 1, 1989 to June 30, 1990. The information used for this study was obtained from official forms, prepared by the Yeungnam University Hospital, and submitted to the Korean Medical Insurance Cooperatives. After implementation of the patient referral system, the number of outpatient cases in the Department of Internal Medicine decreased 36.1% from 9,669 cases to 6,181 cases a year. Cases in the Department of General Surgery decreased 23.7% from 1,864 cases to 1,422 cases a year. The number of cases in the Department of Pediatrics decreased 36.9% from 3,372 cases to 2,128 cases a year. After implementation of the patient referral system, the average age of cases in the Departments of Internal Medicine and General Surgery was 52.5 and 49.7 years old, respectively. This was a significant increase in comparison with the pre-implementation period. After implementation of patient referral system, the proportion of new outpatients in the Department of Internal Medicine decreased from 24.1% to 14.6%, the Department of General Surgery from 36.0% to 23.4%, and the Department of Pediatrics from 15.5% to 8.3%. The number of visits per case decreased significantly in the Department of Internal Medicine(from 1.74 to 1.61), but there was no significant change in the Departments of General Surgery and Pediatrics. The length of treatment per case increased significantly in all three departments(from 16.1 days to 19.3 days in the Department of Internal Medicine, from 12.0 days to 15.2 days in the Department General Surgery, and 8.9 days to 11.2 days in the Department of Pediatrics). The number of clinical tests per case increased significantly in the Department of Internal Medicine (from 2.2 to 2.5), in the Department of Pediatrics(from 0.8 to 1.1) and increased in the Department of General Surgery(from 6.4 to 6.6). The average medical cost per case decreased from 43,900 Won to 42,500 Won in the Department of Internal Medicine, while the cost increased from 75,900 Won to 78,500 Won in the Department of General Surgery and from 12,700 Won to 13,500 Won in the Department of Pediatrics. In case-mix, the chronic degenerative disease(i. e. hypertension, diabetes mellitus, angina pectoris, malignant neoplasm, and pulmonary tuberculosis) ranked higher and acute infectious diseases and simple cases(i. e. gastritis and duodenitis, haemorrhoids, anal fissure, carbuncle, acute URI, and bronchitis) ranked lower after implementation of the patient referral system compared to before implementation.

• Journal of Bio-Environment Control
• /
• v.27 no.2
• /
• pp.140-146
• /
• 2018

This research was conducted to determine the influence of incorporation levels of sulfur into a coir dust+pine bark medium (1:1, v/v) on the changes in the bicarbonate ($HCO_3{^-}$) concentrations and pH of soil solution, crop growth, and nutrient uptake of 'Ssanta' strawberry. In the preparing of the mixed medium, sulfur powder was added with the rate of 0 (control), 0.23, 0.45, 0.90, and $1.80g{\cdot}L^{-1}$ and Hoagland nutrient solution containing $240mg{\cdot}L^{-1}$ $HCO_3{^-}$ was supplied during the crop cultivation. The growth measurements and tissue analysis for the determination of nutrient contents were carried out 140 days after solution application and the soil solution analysis was performed every two weeks. As the level of sulfur was elevated, the overall growth of mother plants became better showing that the growth indexes except chlorophyll contents were the lowest in control treatment but the statistical differences were not found among the three treatments of $0.45g{\cdot}L^{-1}$ or higher sulfur. The higher the levels of sulfur incorporation, the higher the occurrence of runners and the growth of daughter plants. The length of the runners and the number of daughter plants occurred per mother plants were higher in the treatments of 0.90 and $1.80g{\cdot}L^{-1}$ than the three treatments of 0, 0.23, and $0.45g{\cdot}L^{-1}$, but the statistical differences were not observed between the 0.90 and $1.80g{\cdot}L^{-1}$ treatments. The rose of pH and $HCO_3{^-}$ concentrations in soil solution of root media continued all the cropping period, but those decreased slightly in the treatments of $0.90g{\cdot}L^{-1}$ or higher. The soil solution concentrations of $K^+$ and $PO_4{^3-}$ in the treatments of 0.90 and $1.80g{\cdot}L^{-1}$ was lower than those in other treatments and the statistical differences in the $Ca^{2+}$ and $Mg^{2+}$ concentrations were not observed among all treatments. The nutrient contents in tissue analyzed in this experiment were the lowest in the control treatments and those increased as incorporation rates of sulfur were elevated. Above results indicated that when 'Ssanta' strawberry is grown hydroponically and the root medium is coir dust and the pine bark (5:5, v/v) mix, the sulfur incorporation rate as pre-planting fertilizer has to be higher than $0.9g{\cdot}L^{-1}$ root medium to reduce the $HCO_3{^-}$ injury.

• 한국유가공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.59-60
• /
• 2002

Edible films such as wax coatings, sugar and chocolate covers, and sausage casings, have been used in food applications for years$^{(1)}$ However, interest in edible films and biodegradable polymers has been renewed due to concerns about the environment, a need to reduce the quantity of disposable packaging, and demand by the consumer for higher quality food products. Edible films can function as secondary packaging materials to enhance food quality and reduce the amount of traditional packaging needed. For example, edible films can serve to enhance food quality by acting as moisture and gas barriers, thus, providing protection to a food product after the primary packaging is opened. Edible films are not meant to replace synthetic packaging materials; instead, they provide the potential as food packagings where traditional synthetic or biodegradable plastics cannot function. For instance, edible films can be used as convenient soluble pouches containing single-servings for products such as instant noodles and soup/seasoning combination. In the food industry, they can be used as ingredient delivery systems for delivering pre-measured ingredients during processing. Edible films also can provide the food processors with a variety of new opportunities for product development and processing. Depends on materials of edible films, they also can be sources of nutritional supplements. Especially, whey proteins have excellent amino acid balance while some edible films resources lack adequate amount of certain amino acids, for example, soy protein is low in methionine and wheat flour is low in lysine$^{(2)}$. Whey proteins have a surplus of the essential amino acid lysine, threonine, methionine and isoleucine. Thus, the idea of using whey protein-based films to individually pack cereal products, which often deficient in these amino acids, become very attractive$^{(3)}$. Whey is a by-product of cheese manufacturing and much of annual production is not utilized$^{(4)}$. Development of edible films from whey protein is one of the ways to recover whey from dairy industry waste. Whey proteins as raw materials of film production can be obtained at inexpensive cost. I hypothesize that it is possible to make whey protein-based edible films with improved moisture barrier properties without significantly altering other properties by producing whey protein/lipid emulsion films and these films will be suitable far food applications. The fellowing are the specific otjectives of this research: 1. Develop whey protein/lipid emulsion edible films and determine their microstructures, barrier (moisture and oxygen) and mechanical (tensile strength and elongation) properties. 2. Study the nature of interactions involved in the formation and stability of the films. 3. Investigate thermal properties, heat sealability, and sealing properties of the films. 4. Demonstrate suitability of their application in foods as packaging materials. Methodologies were developed to produce edible films from whey protein isolate (WPI) and concentrate (WPC), and film-forming procedure was optimized. Lipids, butter fat (BF) and candelilla wax (CW), were added into film-forming solutions to produce whey protein/lipid emulsion edible films. Significant reduction in water vapor and oxygen permeabilities of the films could be achieved upon addition of BF and CW. Mechanical properties were also influenced by the lipid type. Microstructures of the films accounted for the differences in their barrier and mechanical properties. Studies with bond-dissociating agents indicated that disulfide and hydrogen bonds, cooperatively, were the primary forces involved in the formation and stability of whey protein/lipid emulsion films. Contribution of hydrophobic interactions was secondary. Thermal properties of the films were studied using differential scanning calorimetry, and the results were used to optimize heat-sealing conditions for the films. Electron spectroscopy for chemical analysis (ESCA) was used to study the nature of the interfacial interaction of sealed films. All films were heat sealable and showed good seal strengths while the plasticizer type influenced optimum heat-sealing temperatures of the films, 130$^{\circ}$C for sorbitol-plasticized WPI films and 110$^{\circ}$C for glycerol-plasticized WPI films. ESCA spectra showed that the main interactions responsible for the heat-sealed joint of whey protein-based edible films were hydrogen bonds and covalent bonds involving C-0-H and N-C components. Finally, solubility in water, moisture contents, moisture sorption isotherms and sensory attributes (using a trained sensory panel) of the films were determined. Solubility was influenced primarily by the plasticizer in the films, and the higher the plasticizer content, the greater was the solubility of the films in water. Moisture contents of the films showed a strong relationship with moisture sorption isotherm properties of the films. Lower moisture content of the films resulted in lower equilibrium moisture contents at all aw levels. Sensory evaluation of the films revealed that no distinctive odor existed in WPI films. All films tested showed slight sweetness and adhesiveness. Films with lipids were scored as being opaque while films without lipids were scored to be clear. Whey protein/lipid emulsion edible films may be suitable for packaging of powder mix and should be suitable for packaging of non-hygroscopic foods$^{(5,6,7,8,)}$.

• Journal of Aquaculture
• /
• v.9 no.2
• /
• pp.159-166
• /
• 1996

A feeding experiment was conducted using juvenile Korean rockfish (Sebastes schlegeli) to evaluate supplemental vitamin premix in a test diet containing fish meal as protein source for nutritional study. Four vitamin premixes were prepared by adjusting different quantity and combination of vitamins. Each vitamin premix contained (mg/kg diet) : premix-1 : ascorbic acid, 2666 ; a-tocopheryl acetate, 417 ; thiamin, 60 ; riboflavin, 200 ; pyridoxine, 40 ; niacin, 800 ; Ca-D-pantothenate, 280 ; myo-inositol, 4000 ; D-biotin, 6 ; folic acid, 15 ; p-amino-benjoic acid, 400 ; mennadione, 40 ; A, 16 ; $D_3$, 0.1 ; choline chloride, 8000 ; cyanocobalamin, 0.09 ; premix-2 : ascorbic acid, 270 ; a-tocopheryl acetate, 189 ; thiamin, 13.5 ; riboflavin,, 27 ; pyridoxine, 13.5 ; niacin, 135 ; Ca-D-pantothenate, 135 ; myo-inositol, 135 ; D-biotin, 1. 4 : folic acid, 4.9 ; mennadione, 5.4 : A, 5.4 ; $D_3$, 2.2 ; choline chloride, 3000 ; cyanocobalamin, 0.05 ; premix-3 : ascorbic acid, 570 ; a-tocopheryl acetate, 107 ; thiamin, 20 ; riboflavin, 14.3 ; pyridoxine, 14.3 ; niacin, 71,3 ; Ca-D-pantothenate, 57 ; myo-inositol, 456 ; D-biotin, 0.7 ; folic acid, 2.9 ; p-aminobenjoic acid, 285 ; mennadione, 5.7 ; A, 5.7 ; $D_3$, 1.1 ; choline chloride, 1500 ; cyanocobalamin, 0.03 ; premix-4 : ascorbic acid, 190 : a-tocopheryl acetate, 36 ; thiamin, 6.7 ; riboflavin, 4.8 ; pyridoxine, 4.8 ; niacin, 23.8 ; Ca-D-pantothenate, 19 ; myo-inositol, 152 ; D-biotin,0.2 ; folic acid, 1 ; p-aminobenjoic acid, 95 ; mennadione, 1.9 ; A, 1.9 ; $D_3$, 0.4 ; choline chloride, 500 ; cyanocobalamin, 0.01. Triplicate groups of the 50 fish averaging 4.25 g were fed one of four isoproteic ($47\%$) and isolipidic ($9\%$) experimental diets to satiation twice a day for 10 weeks. Weight gain, feed efficiency and protein retention in fish fed the diet with vitamin premix-1 were significantly higher than those in fish fed the other diets (P<0.05). Moisture, protein and lipid contents of muscle and whole body were not affected by different dietary vitamin premix (P>0,05). These results indicate that premix-1 can be used to adequate supplemental vitamin premix in test diet containing fish meal as protein source for juvenile Korean rockfish.