• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.3
• /
• pp.31-39
• /
• 2014

In KSLV-I launch mission, real-time data from the tracking stations are acquired, processed and distributed by the Mission Control System to the user group who needed to monitor processed data for safety and flight monitoring purposes. The processed trajectory data by the mission control system is sent to each tracking system for target designation in case of tracking failure. Also, the processed data are used for decision making for flight termination when anomalies occur during flight of the launch vehicle. In this paper, we propose the processing mechanism of slaving data which plays a key role of launch vehicle tracking mission. The best position data is selected by predefined logic and current status after every available position data are acquired and pre-processed. And, the slaving data is distributed to each tracking stations through time delay is compensated by extrapolation. For the accurate processing, operation timing of every procesing modules are triggered by time-tick signal(25ms period) which is driven from UTC(Universial Time Coordinates) time. To evaluate the proposed method, we compared slaving data to the position data which received by tracking radar. The experiments show the average difference value is below 0.01 degree.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.6
• /
• pp.52-62
• /
• 1999

This paper presents a system which recognizes dynamic hand gestures on-line for controlling motion of numan avatar in virtual environment(VF). A dynamic hand gesture is a method of communication between a computer and a human being who uses gestures, especially both hands and fingers. A human avatar consists of 32 degree of freedom(DOF) for natural motion in VE and navigates by 8 pre-defined dynamic hand gestures. Inverse kinematics and dynamic kinematics are applied for real-time motion control of human avatar. In this paper, we apply a fuzzy min-max neural network and feature analysis method using fuzzy logic for on-line dynamic hand gesture recognition.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.2
• /
• pp.74-82
• /
• 2010

A government agency has been announced to increase 23,663 hundred million wons by cost of design change which occurred in the pre-construction and construction phase. As design change is a phenomenon to occur by means of a characteristic of the building design that standardization is difficult, even if it is said that a perfect design is done in design phase, design change is prevented, and it is going to decrease, and there is a limit. Because there are some causes in all of the construction project, it is change order of client, relative system, unfit design and field condition, etc. In this study, we are suggested logic and basic model of the decision making support process model that it should selecting the optimal alternative through complex and quantitative analyzed: that is cost, performance and constructability as respect Owner or CMr is executing project under the CM delivery system construction project which it occurred design change.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.5
• /
• pp.1-9
• /
• 2010

In this paper, the novel architecture of Intra-prediction & DCTQ hardware, which can process for the Full HD image($1980{\times}1088$@30fps) in realtime, is proposed. The cycle optimization method for the overall cycle of prediction, transform, scaling, descaling, and reconstruction is proposed. To reduce the cycle in the $4{\times}4$ prediction, the quantization process is performed during the prediction cycle and pre-selection of 2 modes among the 9 modes is performed to reduce the hardware area. To reduce the hardware of $16{\times}16$ and $8{\times}8$ prediction, the sharing logic between 2 prediction is utilized. The proposed architecture can process the 30frame/sec of full HD image in 108 MHz clock and operate 425 cycle for one macroblock.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.163-163
• /
• 1999

MOSFET, MESFET 그리고 MODFET는 Logic ULSIs, high speed ICs, RF MMICs 등에서 중요한 역할을 하고 있으며, 그것의 gate electrode, contact, interconnect 등의 물질로는 refractory metal을 이용한 CoSi2, MoSi2, TaSi2, PtSi2, TiSi2 등의 효과를 얻어내고 있다. 그중 TiSi2는 비저항이 가장 낮고, 열적 안정도가 좋으며 SAG process가 가능하므로 simpler alignment process, higher transconductance, lower source resistance 등의 장점을 동시에 만족시키고 있다. 최근 소자차원이 scale down 됨에 따라 TiSi2의 silicidation 과정에서 C49 TiSi2 phase(high resistivity, thermally unstable phase, larger grain size, base centered orthorhombic structure)의 출현과 그것을 제거하기 위한 노력이 큰 issue로 떠오르고 있다. 여러 연구 결과에 따르면 PAI(Pre-amorphization zimplantation), HTS(High Temperature Sputtering) process, Mo(Molybedenum) implasntation 등이 C49를 bypass시키고 C54 TiSi2 phase(lowest resistivity, thermally stable phase, smaller grain size, face centered orthorhombic structure)로의 transformation temperature를 줄일 수 있는 가장 효과적인 방법으로 제안되고 있지만, 아직 그 문제가 완전히 해결되지 않은 상태이며 C54 nucleation에 대한 physical mechanism을 밝히진 못하고 있다. 본 연구에서는 증착 시 기판온도의 변화(400~75$0^{\circ}C$)에 따라 silicon 위에 DC/RF magnetron sputtering 방식으로 Ti/Si film을 각각 제작하였다. 제작된 시료는 N2 분위기에서 30~120초 동안 500~85$0^{\circ}C$의 온도변화에 따라 RTA법으로 각각 one step annealing 하였다. 또한 Al을 cosputtering함으로써 Al impurity의 존재에 따른 영향을 동시에 고려해 보았다. 제작된 시료의 분석을 위해 phase transformation을 XRD로, microstructure를 TEM으로, surface topography는 SEM으로, surface microroughness는 AFM으로 측정하였으며 sheet resistance는 4-point probe로 측정하였다. 분석된 결과를 보면, 고온에서 제작된 박막에서의 C54 phase transformation temperature가 감소하는 것이 관측되었으며, Al impuritydmlwhswork 낮은온도에서의 C54 TiSi2 형성을 돕는다는 것을 알 수 있었다. 본 연구에서는 결론적으로, 고온에서 증착된 박막으로부터 열적으로 안정된 phase의 낮은 resistivity를 갖는 C54 TiSi2 형성을 보다 낮은 온도에서 one-step RTA를 통해 얻을 수 있다는 결과와 Al impurity가 존재함으로써 얻어지는 thermal budget의 효과, 그리고 그로부터 기대할 수 있는 여러 장점들을 보고하고자 한다.

• Journal of the Korean association of regional geographers
• /
• v.7 no.4
• /
• pp.81-92
• /
• 2001

Main debates in the modern geographical thoughts had been developed around the regional geography. Because regional geography had been regarded as a raison d'etre of geography, it remains solid status in geography curriculum. But unscientific nature of regional geography was the main problem of modern geography. Modern geography has developed the logical legitimation of regional geography, instead of research procedures. We examine the logic of modern geographical thoughts from 3 worldview. Here we represented the part - the whole relationship as the primary category, and classify these into three type according to the implicit proposition about the relationship. One is the organic view, which assume that the whole is greater than the sum of the parts. This view was the primary proposition held by the modem geographers. This view regarded the region as organic complex, and presume the unit region which is irreducible to the elements. The other is mechanic view, which presuppose that the whole is the sum of the parts. This view comprehend region by means of spatial order, in order to simplify the complex reality. Then we compare real condition with assumption. These two view held static assumption. Now, the third view regarded the part- the whole relationship as being dynamic. Most geographers held the organic view, although someone suggests the idea of harmony, the others suggests the idea of complex. But these view presumes the pre-industrial society in which the genre de vie was main principle of social order. Therefore It could not comprehend the regional concept in the context of the urbanization and industrialization.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.10 no.3
• /
• pp.252-259
• /
• 2000

In this paper, we propose a Fuzzy Classifier System(FCS) to find a set of fuzzy rules which can carry out the edge detection of a image. The FCS is based on the fuzzy logic system combined with machine learning. Therefore the antecedent and consequent of a classifier in FCS are the same as those of a fuzzy rule. There are two different approaches, Michigan and Pittsburgh approaches, to acquire appropriate fuzzy rules by evolutionary computation. In this paper, we use the Michigan style in which a single fuzzy if-then rule is coded as an individual. Also the FCS employs the Genetic Algorithms to generate new rules and modify rules when performance of the system needs to be improved. The proposed method is evaluated by applying it to the edge detection of a gray-level image that is a pre-processing step of the computer vision. the differences of average gray-level of the each vertical/horizontal arrays of neighborhood pixels are represented into fuzzy sets, and then the center pixel is decided whether it is edge pixel or not using fuzzy if-then rules. We compare the resulting image with a conventional edge image obtained by the other edge detection method such as Sobel edge detection.

• Journal of architectural history
• /
• v.3 no.1
• /
• pp.161-172
• /
• 1994

This is part of a study on the origin of modernist forms and settings. Forms in Modern Architecture are totally new as though they seemed to be originated from some remote culture. Archaeological studies and Laugier's primitivist attitude to the classical architecture provided a way leading, in the end, to pure structures and abstract forms. An application of the classical elements was combined with the ultimate image of nobility, simplicity and rationality. What the seventeenth and eighteenth century theorists realized in the ruines of the classical structures were not the ones with their original organic vitality but the deteriorated, naked and abstracted ones. The essence of the classical structures has been the one of the main references of the modern white architecture. Ration and Nature were the quintessential terms in the design process of the Enlightenment architects of the late eighteenth and nineteenth centuries as they were in the twentieth century architecture. Pure geometric and symbolic forms were new inventions for the new revolutionary age after the development of architectural Styles, successive until Baroque and Roccoco, ceased to go on to the next phase. Many of their buildings appeared so modem in character, for they were omitted all but the essential structure and decoration. Other sides of rationality in the pre-modern age were evolved in terms of the paradigmatic research and the logic in structure. Durand developed a systematic typological approach to the forms. Geometry was the basis of his designs and his illustrations resembled endless simple geometrical problems. One of the other rational approaches was mainly developed by Viollet-le-Duc. To him, Gothic architecture was the model in which each members functioned actively and exerted counterpressure and the Middle Ages invented new fantastic forms. The several ways of rational approaches in architecture were led to the 'tabula rasa' planning in modern architecture. Nature was remained untouched and not deformed as Ledoux's houses in the $H{\hat{o}}tel$ de $Th{\acute{e}}lusson$ were setted on informal gardens. It is part of the modem image that Nature flows or interpenetrates through the white prisms of the strictest classical purity and machines.

• Journal of the military operations research society of Korea
• /
• v.27 no.1
• /
• pp.1-9
• /
• 2001

In this paper, "a conceptual model of Reconnaissance-Strike-Logistics Complex(RSLC) in future warfare" is proposed. Basic idea of the RSLC model is to combine logistics and the pre-existing Reconnaissance-Strike Complex(RSC) through a C4 network system. That is, the RSLC model consists of reconnaissance, strike, logistics, and C4 network systems. The C4 network system creates new combat power by integrating all the other systems. The RSLC model generates three conceptual complex circles; the RSC, the SLC(Strke-Logistics Complex), and the RSLC circles. The RSC circles describes direct combat behaviors in the battlefield. On the other hand, the SLC circle indicates combat sustainment capabilities. The RSLC circle including the RSC and the SLC circles, can present a more complete combat process. There are two key advantages of the RSLC model. First of all, logistics is considered one of key combat components to form IDA(Information-Decision-Action) cycle for combat decision-making process more completely. Secondly, the capabilities of battlefield awareness which reconnaissance and war-net systems provide, can be applied not only to the strike system in the RSC circle, but also to the logistics system in the SLC circle. Thus, the RSLC model can maximize combat synergy effects by integrating the RSC and the SLC. With a similar logic, this paper develops "A Revised System of Systems with Logistics (RSSL)" which combines "A New system of Systems" and logistics. These tow models proposed here help explain several issues such as logistics environment in future warfare, MOE(Measure of Effectiveness( on logistics performance, and COA(Course of Actions) for decreasing mass and increasing velocity. In particular, velocity in logistics is emphasized.

• Journal of The Korean Association of Information Education
• /
• v.22 no.6
• /
• pp.661-669
• /
• 2018

As SW education has become essential since 2018 due to the revised curriculum in 2015, researches on SW education are actively being carried out. In order to understand the level of pre-service teachers' computational thinking level, we analyzed a correlation of CT element scores with each year and each grade based on the calculated Scratch project by years using the analysis tool Dr. Scratch, which was targeted for 325 students in K National University of Education who passed the scratch course from 2016 to 2018. The result indicated that there is a positive correlation between all the CT related factors and both the year and the grade. Conclusionally, it is crucial to have students undergo revising process by using an automated evaluation tool such as Dr. Scratch and cultivate ability to create and utilize required materials. Furthermore, it is necessary to educate students to utilize logical thinking elements such as complex conditions and logic operations.