ZnO is one of the widely utilized n-type semiconducting oxide materials in the field of optoelectronic devices. For its application to the fabrication of promising ultraviolet (UV) photodetectors, ZnO with various structures has been extensively studied. However, study on the photodetectors using zero-dimensional (0-D) ZnO nanoparticle is scarce while the 0-D nanoparticle structure has many advantages compared to the other dimensional structures for absorption of light. In this study, the photocurrent characteristics of ZnO nanoparticles were investigated through a simply pasting of the nanoparticles across the pre-patterned electrodes. Then the photoluminescence (PL) characteristic, photocurrent response spectrum, photo- and dark-current and photoresponse spectrum were investigated with a He-Cd laser and an Xe lamp. An dominant PL peak of the ZnO nanoparticles was located at the wavelength of 380 nm under the illumination of 325-nm wavelength light. The ratio of photocurrent to dark current (on/off ratio) is as high as 106 which is considerable value for promising photodetectors. On the other hand, the time constants in photoresponse were relatively slow. The reasons of the high on/off ratio and relatively slow photoresponse characteristic will be discussed.
The scope of this study was to develop, design, and build an ex-situ remediation system of using the heating and water sparging treatment for the highly volatile DNAPL (Dense Non-Aqueous Phase Liquid) contaminated groundwater, and to conduct pilot testing at the site contaminated with DNAPL. The TCE (Trichloroethylene) removal was at the highest rate of 94.6% with the water sparging at $70^{\circ}C$ in the lab-scale test. The pilot-scale remediation system was developed, designed, and fabricated based on the results of the lab-scale test conducted. During the pilot-scale testing, DNAPL-contaminated groundwater was detained at heat exchanger for the certain period of time for pre-heating through the heat exchanger using the thermal energy supplied from the heater. The heating system supplies thermal energy to the preheated DNAPL-contaminated groundwater directly and its highly volatile TCE, $CCl_4$ (Carbontetrachloride), Chloroform are vaporized, and its vaporized and treated water is return edback to the heat exchanger. In the pilot testing the optimum condition of the HWSRS was when the water temperature at the $40^{\circ}C$ and operated with water sparging concurrently, and its TCE removal rate was 90%. The efficiency of the optimized HWSRS has been confirmed through the long-term performance evaluation process.
본 논문은 중공슬래브 교량의 장점을 극대화하여 프라캐스트로 제작된 PSC-I거더의 단순한 조립을 통해 중공슬래브를 형성시키는 교량공법을 제안하고 이를 검증하였다. 하천이나 단지 내 교량과 같이 저형고 거더교가 요구되는 현장에 고가인 강합성 계열의 교량이 적용되어 과도한 공사비가 소요되고 있으며, 다양한 장점을 갖는 중공슬래브 교량이 콘크라트의 현장타설로 인해 중공부에 구조적 균열이 발생하여 그 적용성이 확장되지 못하고 있는 실정이다. 따라서, 본 연구를 통해 새로운 거더공법을 대안으로 제시하고 설계기준에 따른 강도와 응력검토, 제작을 위한 거푸집의 설계, 시공단계별 절차 등 현업적용을 위한 기반기술을 개발하였으며, 조립된 거더가 일체로 거동하도록 각 거더의 횡방향 연결을 위한 다양한 공법을 제시하고 적정성을 검토하였다. 또한, 실물크기의 실험체 거더 2본을 제작하고 시공과정에서의 문제점들을 도출하였으며, 하중재하 실험을 수행하여 거더의 성능과 적용성을 검토하였다. 실험결과, 하중의 편측 재하시 발생한 수직변위 계측을 통해 두 거더가 일체로 거동하는 것을 확인하였으며, 설계하중 내에서 선형탄성 휨 거동을 보이며 예상된 설계 강도를 넘어서는 우수한 성능을 나타내었다.
공동주택 하자는 추가적으로 투입되는 각종 자원의 낭비, 경제적 비용손실로 연결되며, 입주자들에게는 시간적, 물질적, 정신적 피해를 주고, 기업에게는 금전적인 손실뿐만 아니라 기업 신용도를 추락하는 문제를 발생시킨다. 이러한 관점에서 본 연구에서는 다수의 하자분쟁 사례를 활용하여 공동주택 공종/하자유형/부위에 대하여 하자 빈도 및 심각도를 고려한 중요도를 산출하여 공동주택 하자관리 효율성을 제고하고, 하자분쟁을 최소화하는데 기여하고자 한다. 이를 위하여 본 논문에서는 공동주택 하자분쟁사례 48건, 약 7,548개의 하자항목 자료를 토대로 분석을 실시하였다. 분석 결과를 정리하면, 하자가 주로 발생하는 공종은 RC, 마감, MEP 공종이며, 중요도가 높은 하자유형은 균열, 누수, 오시공, 미시공 등인 것으로 확인되었다. 또한 하자부위의 경우 상대적으로 현장 설치 중심의 가구, 설비기기보다 현장 시공 중심의 외벽, 내벽, 내부 천장 및 바닥이 하자 중요도가 높은 것으로 확인되었다. 이에 따라 기본적으로 생애주기 각 단계별 품질관리를 철저히 할 필요도 있지만, 내부공간을 구성하는 부위의 경우, Pre-fabrication에 대한 활용성을 높이는 것을 고려할 필요가 있다.
PURPOSE. This study aimed to assess the effect of non-thermal plasma on the shear bond strength of resin cements to polyetherketoneketone (PEKK) in comparison to other surface treatment methods. MATERIALS AND METHODS. Eighty PEKK discs were subjected to different surface treatments: (1) Untreated (UT); (2) Non-thermal plasma (NTP); (3) Sandblasting with $50{\mu}m$$Al_2O_3$ particles (SB); and (4) Sandblasting + Non-thermal plasma (SB+NTP). After each surface treatment, the contact angle was measured. Surface conditioning with Visio.Link was applied in all groups after pre-treatment. RelyX Unicem resin cement was bonded onto the PEKK specimens. After fabrication of the specimens, half of each group (n=10) was initially tested, while the other half was subjected to thermocycling ($5^{\circ}C$ to $55^{\circ}C$ at 10,000 cycles). Shear bond strength (SBS) testing was performed using a universal testing machine, and failure modes were assessed using stereomicroscopy. The SBS results were analyzed statistically using one-way ANOVA followed by Tukey's post hoc test. Independent t-test was used to examine the effect of thermocycling (P<.05). RESULTS. The highest SBS values with or without thermocycling were observed with PEKK specimens that were treated with SB+NTP followed by the SB group. The lowest SBS results were observed in the UT groups. CONCLUSION. The shear bond strength between PEKK and resin cements was improved using non-thermal plasma treatment in combination with sandblasting.
이 딥펜 나노리소그라피(DPN)는 원자 힘 현미경(AFM)을 기반으로 하는 나노 및 마이크로 패턴 제조 기술이다. 다양한 잉크 물질을 AFM 탐침에 코팅하여 탐침과 기판 사이에 형성된 물 메니스커스를 통해 기판으로 전이시켜 패턴을 제조한다. 본 연구에서는, 실란 전처리된 AFM 탐침 표면에 불소 실란 잉크 용액을 코팅하고 하이드록시기로 개질된 실리콘 기판 위에 접촉시킨 후, DPN 기술을 이용하여 표면으로 잉크 물질을 전이시키는 연구를 진행하였다. HDFDTMS 잉크 물질의 dot 어레이 패턴을 안정적으로 제조하였으며, AFM 탐침과 기판 사이의 접촉시간에 따라 패턴 크기가 선형적으로 증가하는 전형적인 DPN의 확산 메커니즘을 보였다.
The need for off-site construction has increased in the construction industry in Korea in recent years due to the enforcement of the 52-hour workweek, the increasing age of workers on construction sites, the deepening dependence on overseas workers, and the stagnation of productivity in the construction industry. Thus, studies on OSC started in April 2020. In addition, as a national policy study advocating the modular construction method, which is one of the OSC methods, was completed in the first half of 2019. 70 housing units in two complexes that satisfied the Housing Act requirements have been supplied to citizens. However, although modular construction methods have been recognized as a dramatic construction method that achieves shortened construction schedules and solves the issues of cost reduction and the shortage of technical workers on sites by combining the advantages of the manufacturing industry and applying the economies of scale, realistically it has issues due to the rising cost of steel and a low pre-fabrication ratio. Moreover, the construction time of core parts, such as those built by pouring concrete, has become a factor that hinders the shortening of construction times. Thus, this study aims to propose a precast concrete(PC) modular construction system, which fuses three-dimensional infill as an interior finish material and a three-surface PC module that can acts as a structure for a construction method that is economical and can shorten construction time.
일차원의 대칭성을 갖는 형판 위에서 Bi원자가 자발적으로 형성하는 나노 구조체의 원자 구조를 이해하기 위하여, 재구조 된 Si(5 5 12)을 Bi의 탈착 온도에 가까운 온도로 가열한 채 Bi를 흡착시키고 주사 터널링 현미경으로 그 원자 구조를 각 흡착 단계별로 규명하였다. 제일 먼저 Bi는 이 기판에 존재하는 여러 종류의 $[\bar{1}\;1\;0]$에 평행한 row들 중에서 기판과 결합력이 가장 약한 dimer row와 adatom row 만을 선택적으로 Bi-dimer row와 Bi-adatom row로 각각 치환한다. 이 과정에서 치환된 Bi는 Si과의 크기 차이로 인해 인접한 (337) subsection에 tensile stress를 인가하게 되고, 그 결과 (337) subsection 내의 tetramer row는 갈라져 dimer row와 adatom row로 변형되고, 이들 역시 Bi-dimer row와 Bi-adatom row로 각각 치환된다. 다음으로 이들 치환된 Bi-dimer row와 Bi-adatom row 위에 각각 Bi-dimer가 흡착하면 서로 마주보며 안정된 Bi-dimer pair를 이루며, 이 pair 역시 row를 이루고 둘째 층을 형성한다. 마지막으로 셋째 층의 Bi는 둘째 층의 마주보는 Bi-dimer pair 위에 흡착한 한 개의 Bi-dime이며 더 이상의 Bi는 쌓이지 않는다. 이와 같이 자발적으로 조립되는 Bi-dimer row의 형성 원인을 종합하면, 재구조 된 Si(5 5 12) 위에서 Bi의 선택적 반응, Bi와 Si의 크기 차이로 인한 표면 stress의 유발, Bi 원자 간의 안정된 결합형태 등을 들 수 있다.
본 연구의 목적은 전신질환으로 입원한 환자의 소아치과 협진 의뢰 현황에 대한 통계분석을 실시하여 소아치과로 의뢰되는 전신질환 환자 실태를 파악하는 것이다. 2012년 한 해 동안 연세대학교 세브란스 병원에 전신질환으로 입원한 소아환자 중 소아치과에 의뢰되어 실제 진료를 받았으며 그 기록이 온전한 391건을 대상으로 하였다. 환자의 나이, 성별, 전신질환명, 협진의뢰과, 협진주소, 치과적 진단명, 치과적 치료 내용, 사망여부로 분류하여 통계 분석하였으며 환자 정보의 수집은 연세의료원의 Clinical Data Retrieval System을 이용하였다. 총 288명의 환자(M:F=166:122)가 소아치과로 의뢰되었으며 평균 연령은 5.9세였다. 재활의학과에서 129건(33.1%), 소아혈액종양내과에서 80건(20.5%), 소아심장과에서 51건(13.0%), 소아신경과에서 44건(11.3%)이 의뢰되었다. 협진주소는 기본 구강검진(156cases, 39.7%), 치아우식증(55cases, 14.0%), 수술 전 검진(50cases, 12.8%)순으로 많았으며 이 외에도 구강통증, 외상, 치아동요도, 교정치료, 자해로 인한 외상, obturator 제작 등 다양한 주소로 의뢰되었음이 확인되었다. 협진 의뢰된 환자의 절반 가량은 특별한 치료 없이 구강검사만을 시행하였으며(193건, 49%), 보존치료 및 예방치료는 각각 63건, 60건으로 비슷한 것으로 나타났다. 전신질환으로 입원한 환자의 소아치과 의뢰 현황을 분석한 결과 구강검진을 포함한 다양한 주소로 의뢰됨이 확인되었으며 재활의학과 및 소아혈액종양내과에서 가장 많은 의뢰가 이루어졌다. 의뢰된 환자의 치과적 진단명은 치아우식증이 가장 많았고 이에 대한 비침습적이고 예방적 치과치료가 주로 이루어졌다. 입원환자의 전신건강관리와도 밀접한 구강질환 예방 및 처치를 위하여 치과협진이 독려되어야 할 것이며 이를 위한 의사 및 보호자의 인식 개선이 요구된다.
특수합금 등 금속분말을 이용하는 분말압연 공정을 적용하여 $MgB_2$ 판재를 제조하고 공정변수에 대한 특성을 조사하였다. 압연롤 간격 0.7 mm와 회전속도 0.7 rpm(~120 cm/min) 조건에서 두께 ~1 mm, 폭 ~100 mm, 그리고 길이 수 cm 크기의 $MgB_2$ 판재를 성공적으로 제조하였으며, 측정된 최고 밀도는 2.05 g/$cm^3$이고 이론 값 대비 약 78 %로 계산되었다. 분말압연 공정을 통해 최종 선재의 크기(특히 두께 측면에서)에 가깝게 공정을 시작할 수 있고 높은 충진 밀도를 유지할 수 있으므로 초전도 선재의 특성 향상과 더불어 생산 비용, 생산속도 측면에서도 매우 유리한 방법이 될 것이다. 또한 자기장하 $MgB_2$ 초전도 특성 향상을 위해 자속 고정점 역할을 할 다양한 도핑 물질(분말 형태 또는 액체 형태 등)을 첨가하는 공정에 있어서 도 본 분말압연 공정을 쉽게 적용될 수 있다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.