• Journal of the Korean Chemical Society
• /
• v.42 no.5
• /
• pp.588-595
• /
• 1998

Excitation and emission characteristics were reviewed for phosphors which were reported, applied, or suggested for the plasma display panel (PDP). Correlation of luminescence characteristics to the host crystal structure and the activator of the phosphor was explained. Improvements of the PDP phosphor for the practicality were considered.

• Computational Structural Engineering
• /
• v.6 no.4
• /
• pp.107-118
• /
• 1993

New methods of visualizing the data from finite element analyses of 3-dimensional solids were developed in this study. Their efficiency and practicality were examined through their application and implementation into a finite element analysis software. The major effort of the study was to provide a way of representing data inside of volume, which is the most difficult problem in the postprocessing of 3-dimensional solids. Section representation, volume slice and separation, and isosurface representation were proposed for this purpose.

• Journal of Advanced Marine Engineering and Technology
• /
• v.8 no.1
• /
• pp.64-71
• /
• 1984

In this paper, the fundemental equation on the Trans-vector control of 3.phi. Induction motor drive and the new equivalent circuit to be adapted for this equation, have been obtained, and control drives system to be coincide with this equation is made. Therefore, it has been obtained that control scheme can always be used motor drive. 3.phi. Induction motor drive has been got the dynamic behavior the same as that of DC motor drive. The drive dynamic response is very rapid because of Trans-vector control on the I_1$ (primary current) and .${\omega}_1$ (frequency of primary current) of the Induation mechine. This paper indicates that a practicality of the drive control system and the rationalty of the theory have been identified with the experimental results. The effect of parameter variations on the drive dynamic response can be evaluated from these results.

• The Research Journal of the Costume Culture
• /
• v.15 no.5
• /
• pp.888-901
• /
• 2007

The purpose of this study was to examine the differences in clothing selection criteria and store selection criteria between each consumer groups by the preference for fast fashion. The data was collected from a questionnaire conducted on 317 female adults. The results were as follows. First, the factor analysis used to identify clothing selection criteria involved the following four factors: fashion, quality/practicality, status symbol, and economics. The consumer group preferring fast-fashion regarded fashion and economics as important factors and the non-preferring group regarded status symbol factor more. Second, five factors(atmosphere, product service/salesperson, shopping convenience, promotion/facilities) of store selection criteria were constructed by factor analysis, The consumer group preferring fast-fashion regarded atmosphere and product as important factors and the non-preferring group considered service/salesperson and promotion/facilities factors more. Third, the consumers who were of low age, low education, low income and unmarried preferred fast fashion brand.

• Journal of Korean Elementary Science Education
• /
• v.17 no.2
• /
• pp.67-77
• /
• 1998

The result of studying primary science education in Korea the first stage under CHOSUN Government General is as follows and it could be seen that it was managed under considerably different philosophy of education than that of the Ministry of Education, Japan. 1) Weekly 2 hours of 'science' were taught at 3rd and 4th grade of primary school. 2) CHOSUN Government General emphasized 'practicality' in the regulation of primary science education. 3) During the transitional period science text compiled by the office of education was revised and used. 4) First primary science text compiled by CHOSUN Government General was "Science Textbook for Commom School" (1913) and it was filled with sentences stimulating interest of students and at end of each chapter there were exercise problems.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.30 no.4
• /
• pp.292-298
• /
• 1994

Catching performance of a mechanized pollock longline system compared with traditional one were examined in order to evaluate the practicality during two cruises in the Sokcho area. Mechanized longline system consists of random baiter, bait cutting machine, storage rails, and line hauler. Baiting efficiency of random baiter was 90-95% with 4-5kt shooting speed. Catching performance of the first experiment, salted sand lance only used as a bait. shows no significant difference between mechanized operation with use fresh sand lance as a bait caught significantly more pollock than traditional one with use salted sand lance (P<0.016). Improved catch rates were about 2 times. As soak time goes on, relative catching efficiency shows a steady increase up to 6~7 hours and thereafter gradually decrease.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.4
• /
• pp.54-64
• /
• 1997

This paper provides a practical control scheme called three-step input method in order to minimize both robot response time and the resulting residual vibration when the robot manipulator reaches its defined end point. This work is concerned with defining a simple practical method to utilize step inputs to achieve optimum response. The optimum response is achieved by using a self- adjusting input command function that is obtained during a real time processing . The practicality of this control scheme is demonstrated by using an analog computer to simulate a simulate a simple flexible robot and conventional servo controller. The experiments focus on point-to-point movement. Also, this method requires little computational effort through the intelligent use of conventional servo control technology and the robot's vibration characteristics.

• Journal of Engineering Education Research
• /
• v.15 no.4
• /
• pp.31-34
• /
• 2012

This paper deals with the introduction of capstone design projects based on invention education in Department of Electronics and Communication Engineering, Korea Maritime University. This course is referred to as Creative Engineering Design for spring semester of 4th-year undergraduates. The course focuses on creative thinking and cooperative mind to students by learning engineering design skills, realizing their idea through design project and recognizing practicality of their systems. To improve creative thinking of students, intellectual property (IP) education is very helpful. If engineering students take training program in IP, it will be very beneficial for CEOs to manage intellectual capital in many industries and to ensure competition power in their business. This study suggested that students take interest in connecting their ideas with inventions through invention education reinforcing an invention and a patent exercise. It is expected that this study may help to develop new curriculum of capstone design project including IP education in many universities.

• Journal of the Korea Furniture Society
• /
• v.21 no.1
• /
• pp.1-16
• /
• 2010

Furniture is a medium to interconnect the living space to human, and it is the closest environmental element that limits the functions of the space, defines the style of the living, and adjusts the actions and behaviors of human. Therefore the furniture can be said to be one of the craft arts that reflects the culture and living style as they are according to the periodical, regional, and social stratum characteristics. Within this context, this study tries to suggest new design and living culture that can harmonize with the modern residence living culture and incorporate the traditional varnishing technique with lacquer that had been discontinued. Coming to the modern days, the varnishing with lacquer is getting attention again with its environment friendly characteristics and antibiotic functions, and is being applied to various applications. To inherit and maintain such an excellent traditional culture, I would like to improve the practicality by applying to modern furniture, and to contribute to develop and tell the world about the superiority of our culture.

• Journal of the Korea Furniture Society
• /
• v.25 no.4
• /
• pp.250-257
• /
• 2014

In recent years, young customers whose priority are on rationality and practicality of products and set a high value on space usage and storage efficiency have shown larger interest in knocked down furniture, thus its purchase has been on the rise. A baby bed design utilizing knocked down system suggested in this article, allows simple assembly and disassembly, easy transportation, easy movement, and also possible to recycle. Using laminated wood made of Douglas fir, a natural material, a baby bed is designed as knocked down structure. Its prototype is made to suggest easy assembly and disassembly design, which does not require any hardware. If efforts are put on the research of furniture design and its product development, focusing on the applicable usage and strength of knocked down furniture, it can become one of the solutions to the development of currently stagnant domestic furniture industry.