• Journal of Yeungnam Medical Science
• /
• v.13 no.1
• /
• pp.97-109
• /
• 1996

Recently there has been attempts to develop hospital information system including order communicating system, patient tracing system, tumor registry system, office automation system and picture archiving and communication system(PACS). The authors devloped a practical system that was operated via order communication system of Yeungnam University Hospital. The system provided us the speed, accuracy, reliability, retention, economy and wide applicability through practical test. So we believed that this system would be one of standard computerized programs in radiation oncology practice and providing widely usable data for clinical statistics, medical record, tumor registry system and clinical researches.

• Journal of the Korean Society of Costume
• /
• v.15
• /
• pp.21-45
• /
• 1990

The purpose of this thesis is to study the method of the reasonable pattern design. The studying method is based on the original principle of the trousers' cutting and I have a hypothesis about the trousers pattern which should be proved. When I selected the practical method, I made use of the international measuring rule, graph paper and tracing paper, in order to prove the new pattern design. The reasonable pattern design should be the one of the suitable original principles to be suited in the design through any measurement. Therefore, I have discussed the above mentioned design. I find out the conclusion to prove the hypothesis of pattern design with the experimental measure after showing the above mentiond design. The characteristics is as follows. First : To be convinient when walking, because of little degree as folding of the front part of trousers with the under-angle. Second : To be suitable in proportion to the length of trousers and the under-angle. Third ; When folding the center line of the Sapok (a name of one of the trousers parts), the length of the Sapoks is same and harmonized with the Sapoks because of the same angle of both Sapoks in any case of the measurement. Fourth : No correction of the lines when dressing, for the same points of the large Sapok and the small one. Fifth : To be easiness of the pattern design through the concrete measurement. I could find out a little extent errors of pattern showings, an easiness of dressing, scientification of formation in Korean trousers and standard of the practical measurement in the program to be presented as the result of studying.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.19 no.4
• /
• pp.31-37
• /
• 1982

Developing a minimum wave resistance hull form which is satisfying the given requirements such as displacement and speed is one of the important problems in ship hydrodynamics. The theoretical approach conducted by Pien was successful in developing an optimized hull form, however, which can not be applied directly to practical hull form without manual lines fairing process. To avoid this difficulty, source distribution which arrived after the optimization was put into a fictitious restricted channel and as a result practicably modified hull form was derived by stream line tracing. The wave resistance of the hull thus obtained was calculated by solving the simplified integral equation suggested by Kan. The resistance at design point is almost same with that of the original hull which was represented by source distribution on the vertical rectangular center plane. It is therefore recommended to use the derived hull form for the hull which obtained after manual lines fairing process at Pienoid method. Further researches both in theory and experiment are necessary before this concept is put into practical application.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.6
• /
• pp.12-22
• /
• 1996

A numerous designs of PI controllers have been suggested to solve out trade-off between tracing and regulating problems. We constructed the PI controller system with two-degree-of-freedom that is more analytic and a better approach to a practical one. In the conventional H$_{2}$ design of optimal PI controllers, the cost function includes only the plant output terms due to the divergent problems. Since the platn input temr is not considered in PI controller design, occasionally, the plant input thends to be either very large or saturated. To solve the prior mentioned problems, we employed a mixed $H_2/H_{\infty}$ method that combines the H$_{2}$ design method to decide optimal parameters of PI controller and the $H_2/H_{\infty}$ design method to minimize the maximum amplitude of plant input. The calculation time of the H$_{infty}$ norm was considerably reduced by the simple scalar function obtained by the wiener-hopf factorization of non-scalar functions.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.2
• /
• pp.133-140
• /
• 2009

Presented in this paper is a method to generate round-endmill toolpaths for sculptured surfaces represented as a triangular mesh model. The proposed method is applicable in toolpath generation for ball-endmills and flat-endmills because the round-endmill is a generalized tool in three-axis NC (numerical control) milling. The method uses a wireframe model as the offset model that represents a cutter location surface. Since wireframe models are relatively simple and fast to calculate, the proposed method can process large models and keep high precision. Intersection points with the wireframe offset model and a tool guide plane are calculated, and intersection curves are constructed by tracing the intersection points. The final step of the method is extracting regular curves from the intersection curves including degenerate and self-intersected segments. The proposed method is implemented and tested, and a practical example is presented.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.422-424
• /
• 2002

Many methods about real power flow tracing have been suggested. Electric power industrials and organizations of the world use the method which is best suitable to themselves in practical aspects. In this paper we calculate the real power transfer between individual generators and loads referencing the method introduced by oversea's paper. It is considered to be significant to the wholesale competition market and transmission open access. Based on ac load flow solution and graph theory, the simulation on IEEE 30-bus system are carried out and the results are compared with that of oversea's paper. Also the simulation on the power system of Korea is carried out and the results are analyzed.

• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.77-82
• /
• 2001

As electric power systems have been moving from vertically integrated utilities to a deregulated environment, the charging of reactive power management is a new challenging theme for market operators. This paper proposes a new methodology to compute the costs of providing reactive power management service in a competitive electrical power market. The proposed formulation, which is basically different from those shown in the literature, consists of two parts. One is to recover investment capital costs of reactive power supporting equipment based on a reactive power flow tracing algorithm. The other is to recover operational costs based on variable spot prices using the optimal power flow algorithm. The charging shapes resulted from the proposed approach exhibit a quite good meaning viewed from a practical sense. It turns out that reactive power charges are mostly due to recovery of capital costs and slightly due to recovery of operational costs. The method can be useful in providing additional insight into power system operation and can be used to determine tariffs of a reactive power management service.

• Archives of Pharmacal Research
• /
• v.16 no.4
• /
• pp.312-317
• /
• 1993

To confirm a new evaluation tedhnique for biodegradability of biopolymer microsphers in vivo condition, magnetic microsphere sytem was adopted for tracing the microspheres injected and lodged in micr. Microsphers of poly(DL-lactic acid), poly(L-alctic acid) and poly(DL-lactide-coglycolide)(PLGA) were prepared by solvent-extraction method and their organ distribution and biodegradation in mice was examined. Magnetic microspheres lodged in mice organs were recollected from the homogenates of mice organs with a constant flow magnetic separation apparatus. Recollected microspheres were observed by scanning electron microscopy and also were assayed for their magnetite ocntent by atomic absorption spectrophotometry to evaluate the biodegradability of polymeric microspheres. This method seems to be practical and simple to estimate the biodegradability of biopolymers over the conventional methods.

• Journal of Korea Game Society
• /
• v.17 no.1
• /
• pp.7-16
• /
• 2017

The 3D game graphic technology has become an important factor in the contents field with the game contents development. In particular, game character technology provides a realistic technique and visual pleasure, as well as an intermediate step in the immersion of the game in which the game might create an optical illusion that enables the player to enjoy heroic adventure in the game. The high expression level of characters in 3D games is a key factor in the development process, with details and carefulness of the character setting work [3]. In this paper, we propose a character representative technique applied to mobile games using mathematical model of radiosity energy, spectral radiance model, and ray tracing model method using 3D unity game engine with sensible AI algorithm for game implementation. As a practical application to the game contents, it was found that the projection of the surface in the rendering process and the game simulation might change according to the lighting condition of the game content environment, so that the high quality of game characters was simulated.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.2
• /
• pp.19-29
• /
• 2008

In case of unit testing, White-box test can be used to closely check source code and to analyze logic and statement errors. On the other hand, in case of function testing of system level, Black-box test can be mainly used to compare actual and expected results by inputting test data because the scale of function is large. This Black-Box test in system testing level has problem in tracing errors in source code when we find errors. Moreover applying White-box test is not easy for system testing level because the levels of test target are different. Therefore this paper suggests the vertical test method of a practical and integrated system level which can checks up to source code level using White-box test style although it aims to test the highly abstract level like a system function. In addition, the experiment explains how to apply the vertical test by displaying an example which traces from UML specification model to the source code and also shows efficiency of error trace.