• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.6
• /
• pp.1064-1074
• /
• 1994

In this paper, an optimum TCM(trellis coded modulation)combined with CPM(continuous phase modulation) signal is investigated, and the performances are evaluated on the two-ray fading channel, which is one of the well-known frequency-selected because of their relatively good power and spectrum efficiency, and the modulation index is varied from 0.1 to 0.6. The performance is evaluated for each modulation index. The constraint length of the encoder, which is comprised in TCM, is chosen to be 2 and 3. From the performance evaluations, when the constraint length is 3 and modulation index 0.5, a power gain if the optimum TCM over the scheme without coding is observed to be 2.0dB for 1REC and 2.1dB for 3RC, respectively, on the fading channel. Thus, a significant improvement on the line quality is expected when the optimum TCM presented in this paper is employed in digital mobile radio applications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.2
• /
• pp.121-136
• /
• 1989

In this paper, an attempt has been made to analyze the theoretically and verify experimentally the effect of curvature on the radiation characteristics of microstrip array antennas mounted conformally on the concave surface and the convex surface of the cylindrical body. The analysis of single element microstrip antenna is made by using the analysis method of Transmission Line Model. The theory of array antennas is established by application of the method of transformed coordinates, in which the translation and the ratation about each single element arrayed two-demensionally on the nonplanar surface are under consideration, and it is investigated by computation of the synthetic electric field strength in the far zone. In addition, various radiation characteristics, such as return loss, resonant frequency, radiation pattern, half-power, beamwidth, gain, are measrued and compared with the theroetical values according to the variation of curvature, by designing and building 4-element array microstrip antenna operating at 10 GHz, and microstrip feed lines. As predicted in theroy, it is verified that radiation pattern of antennas mounted on the concave and the convex surfaces alike broadens as the radius of curvature decreases. And for the curved surfaces, aggrement between computed values of the total synthetic radiation power pattern by the method of transformed coordinates and measured valuse is good. Besides, it is found that resonant frequency, input impedance and gain are hardly affected by the radius of curvature.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3A
• /
• pp.240-248
• /
• 2006

In this paper, we consider an OFDM receiver algorithm design for IEEE 802.11a/p system, which targeting large coverage area while keeping the transmission format unchanged. Particularly, taking into account the inter-symbol interference(ISI) and inter-carrier interference(ICI) that can be induced with large RMS delay spread, we employ channel shortening time-domain equalizer(TEQ) and evaluate the receiver performance in terms of SINR and packet error rate(PER). The preamble defined in IEEE802.11a/p is used to estimated the initial equalizer tap coefficients. Primary purpose of the paper is to give an answer to the question, though partially, whether or not 16-QAM constellation can be used in none line of sight environment at the boundary of a large coverage area. To this end, we first analyze the required TEQ parameters for the target channel environment and then perform simulation for PER performance evaluation in a generic frequency selective fading channel with exponential power-delay profile.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.1
• /
• pp.33-38
• /
• 2008

The probability of an oscillation occurrence in M/W frequency conversion repeaters is low on account of the different operating frequency of the input and output signals. The probability of interference caused by the M/W frequency conversion repeaters to other systems is also low because the systems are used in the line-of-sight. Therefore M/W frequency conversion repeaters are generally used for retransmitting the signal received from base station to the islands. This paper describes the design and implementation of analog predistorter for M/W frequency conversion repeaters in mobile communications. The M/W repeaters convert IF frequency of 1010+/-10MHz to RF frequency of 11GHz. A predistorter can be designed for the M/W repeater operating in either IF or M/W frequency. In this paper IF predistorter operated in 1010MHz is designed and implemented because a M/W predistorter operated in 11GHz is difficult to implement. The IF predistorter can linearize RF modules in the repeater followed by IF stages. The performance test results show that the implemented analog predistorter improves ACPR of 10dB at the output power of 25dBm with the signal frequency of 10.805GHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.12B
• /
• pp.1183-1191
• /
• 2010

In this paper, I propose an adaptive OFDM CP length algorithm for in PLC systems for smart grid. The proposed scheme calculates the channel delay information at the CP controller of the receiver by taking correlation between a received data frame and the following delayed one. The CP controller, immediately, feeds back the channel delay information to the transmitter. Then, the transmitter adapts CP length for next data frame. As an impulsive noise model, Middleton Class A interference model was employed. The performance is evaluated in terms of packet data rate, cumulative packet data rate, and bit error rate (BER). The simulation results showed data gain (which is the amount of the reduced bits) gets larger as the number of packets increase, but the amount of data gain reduced as the number of branches ($N_{br}$) increase. In respects of BER for the cases $N_{br}$ is 3, 4, and 5, performance of the adaptive CP length algorithm and the fixed CP scheme are similar. Therefore, it is confirmed the proposed scheme achieved data rate increment without BER performance reduction compared to the conventional fixed CP length scheme.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.05a
• /
• pp.266-271
• /
• 1999

The purpose in this study has to development the system on increasing operation of old-typed transceiver for solve the question that limited allocation frequencies and continuesly icreasment of traffic. Therefore, we are desigened the remote control system that has the function for variable channels, PTT and monitoring of transmission power and frequencies. Exchange of control data is to hold in common the twist two-wire or telephone line for the voice transmission. The H/W is consist of FSK and MCS-51 processor which are up-down control of channel, n control and monitoring display by serial data transmission. According to the simplex traffic operation is designed the algorithm of serial data transmission by sequential transmission sequence and protocol. The S/W of sequential transmission sequence is designed to usefully the intergrated communications system which is able to connection between the multi-transceiver and multi-terminal by master processor.

• Korean Journal of Optics and Photonics
• /
• v.20 no.3
• /
• pp.143-147
• /
• 2009

We propose an asymmetrical 2.5 Gbps / 622 Mbps bidirectional optical subscriber network with Manchester coded downstream and NRZ (Non-Return-to-Zero) upstream remodulation. The proposed system has important characteristics in the optical network unit (ONU): it does not require a light source or the usual control circuits such as wavelength control and output power control, and it is possible to use a synchronization scheme between upstream and downstream data. We theoretically analyze BER(Bit Error Rate) performance of upstream data remodulated with Manchester coded downstream according to the types of NRZ downstream data and perform simulations with MATLAB. The BER performance and the receiver sensitivity have been improved by 3 dB by adjusting threshold levels compared to the conventional receiver. The results have shown the remodulation scheme with Manchester coded downstream could be a useful technology for asynchronous and asymmetric optical subscriber networks with low cost and simple structures.

• Information and Communications Magazine
• /
• v.23 no.8
• /
• pp.35-42
• /
• 2006

최근 광대역 서비스에 대한 소비자들의 욕구가 차츰 증가하고 있고 대상콘텐츠도 데이터와 음성 및 비디오까지 포함된 멀티미디어 서비스로 변화함에 따라, 통신서비스 제공업체들은 이에 대한 해결책을 찾는 것이 지상과제가 되었다. xDSL, 케이블 모뎀, 광랜 등 엑세스 네트워크가 잘 발달되어 있는 국내에서도 멀티미디어 서비스의 최종 수신 장치가 될 TV, PC, 오디오 기기 및 전화기 등에까지 네트워크를 연결하기 위해서는 댁내에서 또 다른 홈 네트워크를 구성해야 하는 상황이다. 이러한 홈 네트워크를 가능하게 하는 기술로는 홈 RF, 무선랜, 블루투스 등 무선 홈 네트워크 기술과 IEEE1394, 이더넷, 홈 PNA, 전력선통신과 같은 유선 홈 네트워크 기술로 나눌 수 있다. 무선 홈 네트워르 기술의 경우, 댁내에서의 반사와 감쇄 등의 영향에 의한 음영지역이 존재하는 단점이 있고 또 RF단을 구현해야 하므로 시스템 가격이 올라가게 된다. IEEE1394, 이더넷, 홈 PNA 같은 유선 홈 네트워크기술의 경우에는 댁내 통신을 위해 새로운 선을 포설해야 하는데 이를 위해서는 막대한 시설 투자비가 들어가게 된다. 이 막대한 투자비는 홈 네트워크 구축에 많은 시간이 걸리게 하는 요인이 될 뿐만 아니라, 일반 사용자들이 서비스를 이용하기에는 가격적으로 부담스럽게 된다. 전력선통신 (PLC: Power Line Communication) 은 전기를 공급하는 전력선에 흐르고 있는 상용주파수 50/60Hz의 저주파 전력신호에 고주파 신호를 활용하여 데이터를 실어 나르는 통신기술이다. 집안 곳곳 이미 포설되어 있는 전력선이 이미 하나의 네트워크를 구성하고 있기 때문에 번거롭고 값비싼 추가 배선작업 없이 바로 네트워킹이 가능하다. 이와 같은 이유로 고속 PLC는 설치 용이성, 접근성, 속도 및 비용부분 등에서 경쟁기술에 비하여 여러 장점을 가지고 있다. 젤라인은 국내 전력선통신 표준을 만족하는 24Mbps 고속 전력선통신 칩을 기반으로 다양한 전력선 채널환경 하에서 최적의 통신을 보장하는 전력선 통신시스템을 제공하고 있으며, 이를 소개하고자 한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.7
• /
• pp.1777-1784
• /
• 1998

The packet error rates of an optical packet switching node with an optical address processor using an EDFA in order to detect M-ary correlation pulses at a fiber-optical delay line matched filter output have been evaluated. Effects of A PIN diode NEP, the gain and noise figure of the EDFA, and the bandwidth of an optical filter on the packet error rate of the switching node have been compared. There is negligible error rate change depending upon the variation of the PIN diode NEP and the EDFA gain. If the bandwidth of the optical filter is below 10 times of the data rate, there is no appreciable effect on the error rate. If the noise figure of the EDFA increases, however, the power penalty increases as much as the noise figure increment at all the bit rates and for address code sets considered in this work.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.2A
• /
• pp.114-121
• /
• 2005

In this paper, Pipelined A/D converter with multi SHA structure is proposed for high speed operation. The proposed structure incorporates a multi SHA block that consists of multiple SHAs of identical characteristics in parallel to improve the conversion speed. The designed multi SHA is operated by non-overlapping clocks and the sampling speed can be improved by increasing the number of multiplexed SHAs. Pipelined A/D converter, applying the proposed structure, is designed to satisfy requirement of analog front-end of VDSL modem. The measured INL and DNL of designed A/D converter are $0.52LSB{\sim}-0.50LSB\;and\;0.80LSB{\sim}-0.76LSB$, respectively. It satisfies the design specifications for VDSL modems. The simulated SNR is about 66dB which corresponds to a 10.7 bit resolution. The power consumption is 24.32mW.