• Journal of Industrial Convergence
• /
• v.17 no.1
• /
• pp.25-31
• /
• 2019

The frequent turnover of nurses is one of the great difficulties of the medical profession, the purpose of this study was to investigate the effects of social support, emotional labor and subjective health on resilience of turnover nurses. The subjects of this study were 70 turnover nurses and collected data from November 1-10, 2018. The collected data were analyzed using the IBM SPSS 25.0 program. The significance level was .05. The results of this study are as follows. 1) Resilience was significantly different according to job satisfaction and subjective health. 2) Resilience showed a significant correlation with social support and subjective health (p <.05). 3) Factors influencing recovery elasticity were job satisfaction and social support and the explanatory power was 44.1% (F = 9.93, p <.001). It is necessary to improve the resilience of nurses to reduce job turnover and increase the adaptability to the clinic. Therefore, it is necessary to reflect these influential factors in improving the resilience of transition nurses.

• Progress in Superconductivity and Cryogenics
• /
• v.23 no.3
• /
• pp.45-50
• /
• 2021

In this study, the effect of the size of B powder on the critical current density (J_c) of MgB₂ prepared by an in situ reaction process was investigated. Various combinations of B powders were made using a micron B, ball-milled B and nano B powders. Micron B powder was reduced by ball milling and the milled B powder was mixed with the micron B or nano B powder. The mixing ratios of the milled B and micron or nano B were 100:0, 50:50 and 0:100. Non-milled micron B powder was also mixed with nano powder in the same ratios. Pellets of (2B+Mg) prepared with various B mixing ratios were heat-treated to form MgB₂. T_c of MgB₂ decreased slightly when the milled B was used, whereas the J_c of MgB₂ increased with increasing amount of the milled B or the nano powder. The used of the milled B and nano B power promoted the formation MgB₂ during heat treatment. In addition to the enhanced formation of MgB₂, the use of the powders reduced the grain size of MgB₂. The use of the milled and nano B powder increased the J_c of MgB₂. The highest J_c was achieved when 100% nano B powder was used. The J_c enhancement is attributed to the high volume fraction of the superconducting phase (MgB₂) and the large grain boundaries, which induces the flux pinning at the magnetic fields.

• The Journal of Korean Philosophical History
• /
• no.50
• /
• pp.333-361
• /
• 2016

The purpose of this study is to delve into reinterpretation and categorization of normative meaning of tradition. The normative meaning of tradition which plays a key role of the action-guiding power is the main source of morality. According to ecological cultural approach to diachronic transition of traditional value, traditional value leads its dynamic life: its origin, acculturation, transformation, distortion of traditional value depending upon periodic social change. It is necessary for traditional value to be reinterpreted and categorized, with a view to contributing to attribute & competency of democratic citizen in future society. The normative meaning of traditional value applicable for Korea's future society can be reinterpreted from its origin revealed in the classic. The order of discussion in this paper runs as follows. Firstly, we will investigate into dynamic change of the traditional value on the basis of the ecological cultural perspective and seek the possibility of modern reinterpretation of loyalty & filial piety as representative traditional value. Finally, we will treat the categorization and its significance of traditional value in the frame of Korean value including both western value and Korean traditional value.

• Korean Journal of Metals and Materials
• /
• v.48 no.3
• /
• pp.194-202
• /
• 2010

Application of a stronger and more durable material for reactor pressure vessels (RPVs) might be an effective way to insure the integrity and increase the efficiency of nuclear power plants. A series of research projects to apply the SA508 Gr.4 steel in ASME code to RPVs are in progress because of its excellent strength and durability compared to commercial RPV steel (SA508 Gr.3 steel). In this study, the microstructural characteristics and mechanical properties of SA508 Gr.3 Mn-Mo-Ni low alloy steel and SA508 Gr.4N Ni-Mo-Cr low alloy steel were investigated. The differences in the stable phases between these two low alloy steels were evaluated by means of a thermodynamic calculation using ThermoCalc. They were then compared to microstructural features and correlated with mechanical properties. Mn-Mo-Ni low alloy steel shows the upper bainite structure that has coarse cementite in the lath boundaries. However, Ni-Mo-Cr low alloy steel shows the mixture of lower bainite and tempered martensite structure that homogeneously precipitates the small carbides such as $M_{23}C_6$ and $M_7C_3$ due to an increase of hardenability and Cr addition. In the mechanical properties, Ni-Mo-Cr low alloy steel has higher strength and toughness than Mn-Mo-Ni low alloy steel. Ni and Cr additions increase the strength by solid solution hardening. In addition, microstructural changes from upper bainite to tempered martensite improve the strength of the low alloy steel by grain refining effect, and the changes in the precipitation behavior by Cr addition improve the ductile-brittle transition behavior along with a toughening effect of Ni addition.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.2
• /
• pp.15-18
• /
• 2022

The ultraviolet-C emitting praseodymium doped yttrium phosphate (YPO₄:Pr³⁺) powder was synthesized by conventional solid-state reaction. The electroluminescence device was fabricated by simple screen-printing method using the synthesized YPO₄:Pr³⁺ powder, especially, polyvinylidene fluoride as an insulating layer was applied on the printed YPO₄:Pr³⁺ powder for stable performance of the electroluminescence. The electroluminescence properties were investigated under alternating current power system of 400 Hz. The device starts to emit at 350 V, which showed the ultraviolet-C emission peaking at the 233, 245, 264, 273 nm attributed to electronic transition of the Pr³⁺ ions. The electroluminescence intensity was increased as increasing the operating voltage and the device revealed stable performance up to 600 V due to the polyvinylidene fluoride serve as a protective layer.

• Nuclear Engineering and Technology
• /
• v.54 no.1
• /
• pp.220-225
• /
• 2022

Perlite is one of the major constituents of the radioactive thermal insulation waste (RTIW) originating from nuclear power plants and, for proper waste management, a significant reduction in its volume is required prior to disposal. In this work, the volume reduction of perlite is studied by high-temperature treatment method with using K₂CO₃ as a flux. The perlite is ground with 0-30 wt% K₂CO₃, and differential thermal analysis/thermogravimetric analysis is used to monitor the glass transition temperature (T_g) and weight loss. The Tg varied between ~772.2 and 837.1 ℃ with the minima at ~643.5 ℃ with the addition of ~10 wt% K₂CO₃. It is observed that compared to the pure perlite the volume reduction ratio (VRR) increases with the addition of K₂CO₃. The VRR of 11.20 is observed with 5 wt% K₂CO₃ at 700 ℃, as compared to VRR of 5.56 without K₂CO₃ at 700 ℃. The X-ray photoelectron spectroscopy and scanning electron microscopy are used to characterize perlite samples heat-treated without/with 5 wt% K₂CO₃ at 700 ℃. Moreover, the atomic absorption spectroscopy indicates that the proposed heat-treatment procedure is able to completely retain the radionuclides present in the perlite RTIW.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.6
• /
• pp.233-239
• /
• 2021

In this study, Ga₂O₃/diamond layers were grown on Si substrates to improve the thermal characteristics of Ga₂O₃ materials. Firstly, diamond thin film was grown on Si substrates by hot-filament chemical vapor deposition. Afterward, Ga₂O₃ layer was grown in the growth temperature range of from 450~600℃ by mist chemical vapor deposition. We found that layer separation happens at the Ga₂O₃/diamond interface at the growth temperature of 500℃. This is attributed to the different thermal expansion coefficient of the mixture of amorphous and crystalline structures during cooling process. Therefore, this study might contribute to the heat-sink-layer bonded power semiconductor applications by stabilizing the thermal properties at Ga₂O₃/diamond interface.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.291-295
• /
• 2022

The transition to wartime operational control during the term of office, which was the promise of the Moon Jae Inn administration, fell through. More than 70 years after it was transferred during the Korean War in 1950, the policy of converting wartime operational control has been repeatedly decided and reversed several times. This conversion of wartime operational control is a national policy directly related to our security, and it is most important to understand the determinants of the administration's conversion to wartime operational control. This paper selects two cases of adjustment of wartime operational control policy during the Lee Myung Bak administration in 2006 and 2010 during the Roh Moo Hyun administration as the subject of the study and expects to gain not only policy predictive power but also successful policy execution at the time of the two administration' policy changes.

• Journal of The Korean Society of Integrative Medicine
• /
• v.10 no.3
• /
• pp.209-219
• /
• 2022

Purpose : The purpose of this study was two-fold: to investigate the effects of uncertainty and depression on the quality of life (QoL) of elderly people with chronic diseases and to provide basic data on the physical, emotional, and psychological factors affecting their QoL in the field of physical therapy. Methods : A questionnaire covering uncertainty, depression, and QoL was distributed among 320 elderly people. Pearson's correlation analysis was performed to examine the correlation between uncertainty (ambiguity, complexity, inconsistency, and unpredictability), depression, and QoL (physical, psychological, social, and living environment domains) of the respondents; furthermore, multiple regression analysis was performed to identify the factors affecting the QoL of the respondents with a chronic disease. Results : The sub-factors of uncertainty and QoL-"complexity and social domain" (r=-.295, p<.001), "complexity and living environment domain" (r=-.302, p<.001), and "inconsistency and living environment domain" (r=-.360, p<.001)-showed a negative (-) correlation, as did depression and the sub-factors of QoL-"depression and physical domain" (r=-.782, p<.001), "depression and psychological domain" (r=-.876, p<.001), "depression and social domain" (r=-.668, p<.001), and "depression and living environment domain" (r=-.731, p<.001). The factors affecting QoL were complexity (𝛽=-.122, p<.001), inconsistency (𝛽=-.102, p=.002), unpredictability (𝛽=.112, p<.001), and depression (𝛽=-.850, p<.001). The relative influence of the independent variables was in the order of depression, complexity, unpredictability, and inconsistency, and the explanatory power was 77.1 % (F=215.853, p<.001). Conclusion : It is important to help the elderly with chronic diseases reduce the negative impact on their quality of life by helping them gain support from their families and medical professionals and by increasing their understanding through communication so that they can transition from negative emotions to positive emotions of opportunity.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.272-275
• /
• 2009

Carbon finance is the investment in Greenhouse Gas (GHG) emission reduction projects in developing countries and countries with economies in transition within the framework of the Kyoto Protocol's Clean Development Mechanism (CDM) or Joint Implementation (JI) and with creation of financial instruments, i.e., carbon credits, which are tradable in carbon market. The additional revenue generated from carbon credits will increase the bankability of projects by reducing the risks of commercial lending or grant finance. Meantime, it has also demonstrated numerous opportunities for collaborating across sectors, and has served as a catalyst in bringing climate issues to bear in projects relating to rural electrification, renewable energy, energy efficiency, urban infrastructure, waste management, pollution abatement, forestry, and water resource management. Establishing additionality is essential for successful CDM project development. One of the key steps is the investment analysis. As guided by UNFCCC, financial indicators such as IRR, NPV, DSCR etc are most commonly used in both Option II & Option III. However, economic indicator such as Economic Internal Rate of Return(EIRR) are often overlooked in Option III even it might be more suitable for the project. This could be due to the difficulties in economic analysis. Although Asian Development Bank(ADB) has given guidelines in evaluating EIRR, there are still large amount of works have to be carried out in estimating the economic, financial, social and environmental benefits in the host country. This paper will present a case study of a CDM development of a 18 MW hydro power plant with carbon finance option in central Vietnam. The estimation of respective factors in EIRR, such as Willingness to Pay(WTP), shadow price etc, will be addressed with the adjustment to Vietnam local provincial factors. The significance of carbon finance to Vietnam renewable energy development will also be addressed.