• 한국전산유체공학회지
• /
• 제12권3호
• /
• pp.62-68
• /
• 2007

A conceptual thermal design is performed for the optical payload system of a geostationary satellite. The optical payload considered in this paper is GOCI(Geostationary Ocean Color Imager) of COMS of Korea. The radiative thermal control system is employed in order to expect a small thermal gradient in the telescope structure of GOCl. Two design margins are applied to the dedicated radiator dimensioning, and three kinds of configuration to the heater power sizing. A Monte-Carlo ray tracing method and a network analysis method are utilized to calculate radiative couplings and thermal responses respectively. At the level of conceptual design, sizing thresholds are presented for the radiator and heater on the purpose of determining the mass and power budget of the spacecraft.

• Nuclear Engineering and Technology
• /
• 제56권5호
• /
• pp.1603-1618
• /
• 2024

Emergency operation plans are indispensable elements for effective process safety management especially when unanticipated events occur under extreme situations. In the paper, a synthesis framework is proposed for the integration success path planning and performance analysis. Within the synthesis framework, success path planning is implemented through flow-directed signal tracing, renaming and reconstruction from a complete collection of Minimal Path Sets (MPSs) that are obtained using graph traversal search on GO-FLOW model diagram. The performance of success paths is then evaluated and prioritized according to the task complexity and probability calculation of MPSs for optimum action plans identification. Finally, an Auxiliary Feed Water System of Pressurized Water Reactor (PWR-AFWS) is taken as an example system to demonstrate the flow-directed MPSs search method for success path planning and performance analysis. It is concluded that the synthesis framework is capable of providing procedural guidance for emergency response and safety management with optimal success path planning under extreme situations.

• 한국정보통신학회논문지
• /
• 제7권4호
• /
• pp.736-742
• /
• 2003

지하공간인 터널에 대하여 이론적인 전파 경로손실 예측과 측정을 수행하였다. 터널 내 전파 경로 손실을 보다 정교하게 해석하기 위하여 터널의 단면적이 직사각형이고 직선구조의 터널을 선택하였다. 혼합도파관 모델, ray tracing모델을 이용하여 수신전력을 예측하였고, 측정시스템을 이용하여 송ㆍ수신기 사이의 거리에 따른 수신전력을 측정하였다. 주어진 터널 환경에서 터널 내 수신전력 측정값에 대한 회귀분석 값(0.0238dB/m)은 혼합도파관 EH1,2모드의 감쇄 값(0.0246dB/m)과 가장 근사한 결과를 보였다. 터널내 송ㆍ수신안테나 사이의 거리에 따른 수신 전력에 대한 Ray-tracing모델 시뮬레이션 결과와 측정값은 거의 일치하였다. 터널 내 RMS지연확산을 계산한 결과 송ㆍ수신안테나 사이의 거리가 증가할수록 RMS 지연확산 값은 증가하였고, 코히어런스 대역폭은 감소하였다.

• 전자공학회논문지A
• /
• 제33A권2호
• /
• pp.15-22
• /
• 1996

This paper presents the generalized method of the prediction of the LOS propagating characteristics in an urban microcell by using theray tracing technique. Whereas the received power is calculated by the finite number of pths, 4~10, on an urban steet, the RMS delay spread is comuted by using the sufficient rays of convergence. To take into account the infinite number of paths the technique of the numbering scheme of image antennas was presented by using the rectangular pulse. As to this the existing restriction of the finitte number of paths was relaxed. based on the method of extending the number of paths and the canyon model the received power and RMS delay spread are computed and their differences according to the number of paths are compared at the frequencies of both 1GHz and 2GHz, respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1962-1963
• /
• 2002

The hand-piece fiber optics is applied to medical appliances such as glaucoma theraphy to focus semiconductor laser on the affected parts efficiently. In this paper, we evaluate optical properties such as beam power and radius of a hand-piece probe by experiments and we also simulate the hand-piece optics by ray tracing method in order to study major parameters to optimize focalization ability. As results, we show experimental and simulation results of the hand-piece optics and also summarize several requirements that have to be considered in optimizing the hand-piece optics.

• 한국전자파학회논문지
• /
• 제9권2호
• /
• pp.199-210
• /
• 1998

최근 들어 활발하게 연구되고 있는 저궤도 위성 이동 통신 시스템은 서비스 지역 내의 전파 수신 환경이 통신 품질을 좌우하므로, 시뮬레이션을 통해 수신 지역의 전파 환경을 분석.예측하는 것이 무엇보다도 중요하다. 본 논문에서는 파추적법을 이용하여 위성 서비스 지역내의 전파 수선 환경을 예측하였다. 먼저, 연구에 필요한 가상 공간 및 구조물을 설정한 뒤 위성의 방위각 및 앙각을 변화사켜 가면서 각 지점에서의 수신 전력 및 지연 프로파 일을 파추적법을 이용한 시뮬레이션을 통하여 구하였다. 본 논문의 목적은 2 GHz 주파수대역을 갖는 위성 통신 망에서의 전파 전달 특성을 해석하고 이해하는데에 있다. 이를 통해 위성 이동 통신에서의 송.수선 시스댐 설계와 위성망 구축에 도움을 줄 수 있을 것이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.239-242
• /
• 2005

A high speed address recovery technique for AC plasma display Panel(PDP) is proposed. By removing the GND switching operation, the recovery speed can be increased and switching loss due to GND switch also becomes to be reduced. The proposed method is able to perform load-adaptive operation by controlling the voltage level of energy recovery capacitor, which prevents increasing inefficient power consumption caused by circuit loss during recovery operation. Thus, the technique shows the minimum address power consumption according to various displayed images, different from Prior methods operating in fixed mode regardless of images. Test results with 50" HD single-scan PDP(resolution = 1366$\times$768) show that less than 350ns of recovery time is successfully accomplished and about 54% of the maximum power consumption can be reduced, tracing minimum power consumption curves.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2005년도 춘계 학술대회
• /
• pp.192-200
• /
• 2005

A high speed address recovery technique for AC plasma display panel(PDP) is proposed. By removing the GND switching operation, the recovery speed can be increased and switching loss due to GND switch also becomes to be reduced. The proposed method is able to perform load-adaptive operation by controlling the voltage level of energy recovery capacitor, which prevents increasing inefficient power consumption caused by circuit loss during recovery operation. Thus, th e technique shows the minimum address power consumption according to various displayed images, different from prior methods operating in fixed mode regardless of images. Test results with 50' HD single- scan PDP(resolution : $1366{\times}768$) show that less than 350ns of recovery time is successfully accomplished and about $54\%$ of the maximum power consumption can be reduced, tracing minimum power consumption curves.

• Current Optics and Photonics
• /
• 제3권3호
• /
• pp.236-242
• /
• 2019

An Nd:YAG slab structure was designed for a high-power zigzag slab laser amplifier based on computational simulation of the wavefront distortion. For the simulation, the temperature distribution in the slab was calculated at first by thermal analysis. Then, the optical path length (OPL) was obtained by a ray tracing method for the corresponding refractive index variation inside the slab. After that, the OPL distribution of the double-pass amplified beam was calculated by summing the results obtained for the first and second passes. The amount of wavefront distortion was finally obtained as the peak-to-valley value of the OPL distribution. As a result of this study, the length and position of the gain medium were optimized by minimizing the transverse wavefront distortion. Under the optimized conditions, the transverse wavefront distortion of the double-pass amplified beam was less than $0.2{\mu}m$ for pump power of 14 kW.

• 수산해양기술연구
• /
• 제50권1호
• /
• pp.67-74
• /
• 2014

Most of steam power plants in Korea are using the method of heating the feed water whenever the ambient temperature around the power plant area below $5^{\circ}C$ to prevent freezing water flowing in the pipe in winter time. But this kind of heat supplying system is not useful to save energy. If we take the method that the temperature of the each pipe is controled by direct measure of temperature by attaching sensor on the outside surface of the feed water tubes, then we can expect that a plenty of energy can be saved. In this study, the computer simulation is used to compare the energy consumption loads of both systems. Energy saving rate is calculated for the location of Incheon area in winter season. Four convection heat transfer coefficients for the ambient air and three initial flowing water temperature inside the tube were used. The result shows that the temperature control system using sensor represents more than 95% of energy saving rate in Incheon area. Even in the severe January weather condition, the energy saving rate is almost 75% in two days basis and even 83% in one day basis.