• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.348-351
• /
• 2006

Initial results of processing data from an experiment performed in November, 2005 are given. A microwave Doppler radar with a knife-like beam ($1.5^0$ - $24.5^0$) was installed on a helicopter. Measurements were made during a flight above the Gorky water storage basin. Power and Doppler spectra of the radar reflected signal were analyzed. The processing has shown that the algorithm developed for the retrieval of the slopes of rough water surface enables one to determine the direction of wave propagation and retrieve the variance of the wave slopes.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.355-355
• /
• 2006

In this study, we have applied principal component analysis-based 2D (PCA2D) correlation spectroscopy to the temperature-dependent IR spectra of biodegradable poly(hydroxyalkanoate). PCA2D analysis reveals clearly that there are two components in crystalline band of C=O stretching mode without being hampered by noise. To better understand the thermal behavior of biodegradable poly(hydroxyalkanoate), eigenvalue manipulating transformation (EMT) technique was also employed. By uniformly lowering the power of a set of eigenvalues associated with the original data, the subtle contributions from minor eigenvectors are highlighted. Details of thermal behavior of biodegradable poly(hydroxyalkanoate) studied by PCA2D correlation spectroscopy with EMT will be discussed.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.3E
• /
• pp.126-131
• /
• 2002

Ultrasonic measurements are made in egg white to study the properties of the solution of the natural protein. The high-Q ultrasonic resonator method is used to get the ultrasonic absorption spectra over the range 0.2-10 ㎒ at 20℃. It is proportional to the 1.25th power of the frequency. The gelation process caused by heat is studied from the change in the velocity and the absorption. at 3 ㎒ using the pulse echo overlap technique over the range of 10-80℃. The absorption decreases with increasing temperature up to 60℃ where it turns up sharply and rapidly increases thereafter. The strong absorption in the gel region is described by the interaction between the solution and the network structure made of protein. Very slow variation in time elapse is observed after the temperature is quickly raised. It would be a real-time observation of the network building process and the characteristic time for the process is shown to be 400 min. A hysteresis phenomenon with respect to the temperature is observed. This phenomenon is associated with the memorizing effect of the network structure of protein of the gel.

• Publications of The Korean Astronomical Society
• /
• v.13 no.1 s.14
• /
• pp.31-37
• /
• 1998

The size of fine structures in the quiescent prominence that appeared on August 16, 1992 has been estimated using power spectra generated from intensity variations of Ha images of the lower part of the prominence, which were taken with a G1 CCD camera attached to 25cm coronagraph at Norikura Coronal Station in Japan. The lower part of the prominence has shown a distinct intensity variation with optical thickness of $\tau=1\~5$. Our analysis yields a mean size of fine structures ranging from 350 km to 1,000 km, in good agreement with Hirayama(1985) and Zirker & Koutchmy(1989, 1991).

• Journal of Electrochemical Science and Technology
• /
• v.3 no.4
• /
• pp.154-158
• /
• 2012

It is generally known that electrochemical impedance spectroscopy is a powerful technique and its real-time application has been demanded for prompt observations on instantaneous electrochemical changes. Nevertheless, long measurement time and laborious analysis procedures have hindered development of it. Solving the problems, here I report of a new algorithm design for development of a real-time electrochemical impedance monitoring system, which potentially provides a guideline in developing monitoring systems of electric vehicles batteries and other electrochemical power plants. The significant progress in this report is employment of the parallel processing protocol which connects independent sub functions to successfully operate with avoiding mutual interruptions. Therefore, all the processes required to monitor electrochemical impedance changes in realtime are properly operated. To realize the conceptual scheme, a Labview program was coded with sub functions units which conduct their processes individually and only data are transferred between them through the parallel pipelines. Finally, measured impedance spectra and analysis results are displayed, which are synchronized according to the time of change.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1294-1296
• /
• 2005

We have fabricated white organic light emitting diodes. To obtain balanced white emission and improve the efficiency of devices, thin electron blocking layer (TEBL) was inserted between the emitting layers. We showed that the effective injection of electrons through the optimization of TEBL (a - NPD) embodied the balance of spectra and had a possibility of getting white emission. In a device with 0.3 nm a-NPD, it had a maximum power efficiency of 3.80 lm/w at 250 $cd/m^2$, a luminance of 1200 $cd/m^2$ at 100 $mA/cm^2$ , and the CIE coordinates were (0.353, 0.357).

• Wind and Structures
• /
• v.20 no.4
• /
• pp.527-548
• /
• 2015

Aeroelastic wind tunnel experiments were conducted for conventional and tapered super-tall building models to investigate the effect of taper on fundamental aeroelastic behaviors in various incident flows. Three incident flows were simulated: a turbulent boundary-layer flow representing urban area; a low-turbulent flow; and a grid-generated flow. Results were summarized focusing on the effect of taper and the effect of incident flows. The suppression of responses by introducing taper was profound in the low-turbulence flow and boundary-layer flow, but in the grid-generated flow, the response becomes larger than that of the square model when the wind is applied normal to the surface. The effects of taper and incident flows were clearly shown on the normalized responses, power spectra, stability diagrams and probability functions.

• Wind and Structures
• /
• v.19 no.1
• /
• pp.35-58
• /
• 2014

A numerical simultaneous solution involving a linear elastic model was applied to study the fluid-structure interaction (FSI) of membrane structures under wind actions, i.e., formulating the fluid-structure system with a single equation system and solving it simultaneously. The linear elastic model was applied to managing the data transfer at the fluid and structure interface. The monolithic equation of the FSI system was formulated by means of variational forms of equations for the fluid, structure and linear elastic model, and was solved by the Newton-Raphson method. Computation procedures of the proposed simultaneous solution are presented. It was applied to computation of flow around an elastic cylinder and a typical FSI problem to verify the validity and accuracy of the method. Then fluid-structure interaction analyses of a saddle membrane structure under wind actions for three typical cases were performed with the method. Wind pressure, wind-induced responses, displacement power spectra, aerodynamic damping and added mass of the membrane structure were computed and analyzed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.9
• /
• pp.21-28
• /
• 2001

The economical detection of dual-tone multi-frequency(DTMF) signals is an important factor when developing cost-effective telecommunication equipment. Each chanel has independently a DTMF receiver, and it informs the detected signal to processors. In order to detect the DTMF signals, the receiver use algorithm such DFT, FFT and Goertzel methods. This paper analyze the power spectra of the DTMF receiver by using the QFT algorithm. As experimental results, it show that can the improved performance of the DTMF receiver and can reduce memory waste and the real time processing.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.04a
• /
• pp.374-381
• /
• 2003

In this study, the reduction schemes of ICRS(In-Cabinet Response Spectra), the main part of seismic safety qualification of old nuclear power plant(USI A-46 problem), are studied. To obtain accurate dynamic characteristics of cabinet structure, the cabinet structure modeled by frame model and its eigen analysis is performed. The three types of seismic retrofitting scenarios, such as 1) the installation of bracing, 2) installation of damper, 3) installation of tuned mass damper(TMD), are established and evaluated for the decreasing of ICRS. In the cases of 1) ＆ 2), since, the retrofitted structures show larger ICRS than that of original structure, the careful considerations are need in the application of these methods. Though, the case of TMD show the best retrofitting result, the tuning between the real structure and analysis model is estimated the essential step of retrofitting.