• 전력전자학회논문지
• /
• 제24권2호
• /
• pp.78-83
• /
• 2019

In this study, we analyze the structure of the transceiver coil in the inductive power transfer (IPT) system. In the IPT system, the transceiver coil design needs to have the highest magnetic coupling possible because of the relatively low magnetic coupling due to the large gap of distance without the core. The transmitting coil may be formed as a multi-layer type according to the distance between the transmitting and receiving coils if the receiving coil is configured as a multi-layer type on the inner structure of the receiving apparatus, thereby improving the magnetic coupling and system efficiency. We compare and analyze the coil magnetic coupling, and system efficiency according to the layer structure of the transmitting and receiving coils and verify the analysis by JMAG simulation. Experimental results show that the layer structure of the transceiver should be considered according to the inner space of the receiving device and the spacing distance.

• 조명전기설비학회논문지
• /
• 제20권4호
• /
• pp.123-130
• /
• 2006

국내공항의 경우 전기설비의 중요도에 비해 이에 대한 설계기준이나 표준지침이 제대로 갖추어지지 않아 오늘날 공항의 건설, 공항시설의 확충, 증설시에 체계적이고 표준화된 수 배전설비를 갖추기 어려운 실정이다. 따라서, 본 논문에서는 국내공항을 Code화에 의한 4등급으로 분류하고 수 배전설비에 대한 정의 및 적용범위를 설정한 후 기존 공항의 수 배전설비에 대한 문제점을 분석하고 공항 수 배전설비 제어시스템 기준과 공항 등급별 3단계 방안을 제시하여 공항등급별 표준 단선 결선도를 작성한 다음 단선 결선도에 따른 공항 수 배전설비 시설기준을 제시한다.

• 반도체디스플레이기술학회지
• /
• 제18권1호
• /
• pp.21-24
• /
• 2019

In this paper, 5.8GHz 25W microwave wireless power transmission system was developed. The transmission system is composed of a signal generator, a 1W drive amplifier, a 25W power amplifier, and a circularly polarized transmission antenna. The receiving system was fabricated with an integrated receiver that combines a circularly polarized receiving antenna, a pass band filter, and an RF-DC converter. And a multi-integrated receiver had twelve parts, including an integrated receiver. Under the conditions, voltage and current were measured for the system at 5cm intervals from a minimum distance of 5cm to a maximum distance of 80cm. The power was calculated for the system. The results of the system are shown in tables and graphs. The power decreases with distance, but the power does not drop sharply due to a multi-integrated receiver.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.133-136
• /
• 2000

Generally in the case of mobil communication service for long distance sea, unlike heavily populated residential areas, providers need to minimize the service area per base station. Therefore, in this thesis, the 800 ㎒ CDMA system should be extended to give better long distance communication service. This model is used to predict the occurring receiving power of the mobile stations that we simulated and analyzed. As a result, the experiment demonstrated the appropriateness of predicting receiving power using this model.

• Journal of Power Electronics
• /
• 제16권4호
• /
• pp.1621-1628
• /
• 2016

Experiencing power declines when the secondary coil is at the middle position between two primary coils is a serious problem in segmented on-road charging systems with a single energized segmented primary coil. In this paper, the topological transformation of a primary circuit and a hierarchical compensation capacitor control are proposed. Firstly, the corresponding compensation capacitors and receiving powers of different primary structures are deduced under the condition of a fixed frequency. Then the receiving power characteristics as a function of the position variations in systems with a single energized segmented primary coil and those with double segmented primary coils are analyzed comparatively. A topological transformation of the primary circuit and hierarchical compensation capacitor control are further introduced to solve the foregoing problem. Finally, an experimental prototype with the proposed topological transformation and hierarchical compensation capacitor control is carried out. Measured results show that the receiving power is a lot more stable in the movement of the secondary coil. It is a remarkable fact that the receiving power rises from 10.8W to 19.2W at the middle position between the two primary coils. The experimental are in agreement with the theoretical analysis.

• 조명전기설비학회논문지
• /
• 제24권10호
• /
• pp.73-77
• /
• 2010

Most accidents occurred in power receiving & transforming facility are ground fault. The quality of power supply is deteriorated since the ground fault is not detected promptly. This paper analyzes the problems about system-grounding type of 2 step power receiving & transforming facility, arrangement of protection relaying scheme and ground-fault protection system of ungrounded system. Then, this paper presents the arranging scheme of system-grounding type to improve power supply reliability.

• 대한의용생체공학회:의공학회지
• /
• 제29권3호
• /
• pp.187-190
• /
• 2008

This paper presents two dimensional receiving coils to provide hundreds of milli-watt power via inductive link to in vivo robotic capsules, whose orientation are practically undetermined. The wireless power transmission system consists of a transmitter powered by class E power amplifier, and a receiver with three dimensional antenna, rectifier, and voltage regulator. As the 2D lateral antenna construction is more critical for the receiving antenna, two types of 2D antennas are introduced and evaluated by theoretic and experimental analyses. Experimental results verifies that the cross-type construction show better directional performance for receiving power than the cylindrical one for the 2D antenna. The former could deliver the power homogeneously regardless of its orientation, with less than 20 % of variation from the possible maximum power.

• 전기학회논문지
• /
• 제63권6호
• /
• pp.776-779
• /
• 2014

In this paper, we analyzed the efficiency of magnetic resonance wireless power transmission (WPT) using superconductor coil according to the changing position of transmission and receiving coils. We implemented a WPT system using a magnetic resonance at a frequency of 63.1 kHz. Transmission and receiving coils using superconductor coil were wound on a spiral manner of diameter 100mm. For comparison, transmission and receiving coils using normal conductor coil were designed under the same condition. At a distance of 50mm, we measured efficiency when transmission-receiving coils were matched 25%, 50%, 75% and 100%. When a superconductor coil was applied to the transmission and receiving units, efficiency of WPT was very high. In addition, in the case of the superconducting transmission-receiving coils, when coils matched 100% the efficiency was 30% and matched 25% the efficiency was 8%.

• 전자공학회논문지
• /
• 제51권9호
• /
• pp.46-53
• /
• 2014

본 논문에서는 무인항공기 가시선 데이터링크 Ku 대역 RF 송수신 시스템을 설계하였다. RF 송수신 시스템은 송수신반, RF 전단반, 고출력증폭반으로 구성되어 있다. 송수신반은 주파수 상/하향 변환 기능과 채널 변경 기능을 제공하며, RF 전단반은 송/수신 신호 이중화, 안테나 선택, 소신호 증폭, 수신신호 외 주파수 필터링 기능을 제공한다. 고출력증폭반은 Ku 대역 전력증폭과 송신출력 가변(고/중/저/Mute) 기능을 제공한다. 송수신반의 주파수 상/하향 변환은 슈퍼헤테로다인 방식으로 구현하였다. RF 송수신 시스템은 대용량 고속 데이터의 신뢰성 있는 송수신을 위하여 광대역 고선형 특성을 갖도록 설계하였다. 또한, 무인항공기 운용 환경에 따른 주파수의 선택적 사용을 위하여 채널 변경이 가능하도록 설계하였다.

• Journal of electromagnetic engineering and science
• /
• 제10권4호
• /
• pp.224-230
• /
• 2010

Wireless power transmission (WPT) is useful technology in near future. There are some kinds of the WPT technologies, WPT via radio waves, resonance coupling, and inductive. Especially the WPT via radio waves is used for multi-purposes from short range to long range application. However, unfortunately it is misunderstood that it is low efficiency and low power. In this paper, I show the theory of beam efficiency between transmitting antennas and receiving antennas and also show some high efficient applications of the WPT via radio waves. Especially, I pick up a wireless power charging system of an electric vehicle and show the experimental results. I show difference between the theory of beam efficiency and the experimental results of short range WPT. I indicate that reasons of poor beam efficiency in the experiment are (1) change of impedance caused by mutual coupling between transmitting antennas and receiving antennas, (2) oblique direction of microwave power to receiving antennas caused by short distance.