• Journal of information and communication convergence engineering
• /
• 제7권3호
• /
• pp.372-376
• /
• 2009

In this paper, new and simple optical transmission link with fixed dispersion management (DM) scheme, i.e., pre(post) compensation and residual dispersion per span (RDPS) are fixed to net residual dispersion (NRD) = 0 ps/nm, and optical phase conjugator (OPC) having optimal position depending on launch power in WDM transmission system is proposed. Also, effective launch power range of WDM channels resulting 1 dB eye opening penalty (EOP) is induced as a function of OPC position. First, it is confirmed that, for applying DM into WDM transmission link fixed pre(post)compensation and RDPS, which are independence on exact system parameters except launch power, sufficiently are used in WDM links, but OPC with optimal position is needed for effective compensating impairments of WDM channels. And, it is confirmed that effective launch power is broader in case of RDPS = 100 ps/nm than in RDPS = 50 ps/nm. But, it is shown that the best OPC position offset is -0.6 km from a point of view of power window, which is defined as difference between maximum and minimum effective launch power.

• 방사성폐기물학회지
• /
• 제19권2호
• /
• pp.177-186
• /
• 2021

Radioactive materials from nuclear power facilities can be released into the atmosphere through various channels. Recently, the dispersion of radioactive materials has become critical issue in Korea after Kori Unit 1 and Wolsong Unit 1 were permanently shut down. In this study, annual atmospheric dispersion factors were compared based on the continuous release and purge release using the XOQDOQ computer program, a method for calculating atmospheric dispersion factors at commercial nuclear power stations. The meteorological data analyzed in this study was based on the Shin Kori nuclear power meteorological tower which has the largest operating nuclear power plants in Korea, for three years (from 2008 to 2010). The analysis results of the dispersion factor of the radioactive material release obtained using the XOQDOQ program showed that the difference between the continuous release and purge release was within two times. This study will be valuable helpful for revealing the uncertainty of the predictive atmospheric dispersion factor to achieve regulation.

• 한국항행학회논문지
• /
• 제16권3호
• /
• pp.440-448
• /
• 2012

그룹 속도 분산 (GVD; group velocity dispersion)과 비선형 효과의 상호 작용에 의해 왜곡되는 파장 분할 다중 (WDM; wavelength division multiplexing) 신호를 보상하기 위해 광 위상 공액기 (OPC; optical phase conjugator)와 분사 제어 (DM; dispersion management)가 적용된 광전송 링크에서의 전체 잉여 분산 (NRD; net residual dispersion)의 최적치와 유효 입사 전력 범위를 도출하였다. 실제 광전송 시스템의 융통적 설계를 위해 한 쪽 반 전송 구획에서의 단일 모드 광섬유 (SMF; single mode fiber) 중계 구간(span) 당 잉여 분산 (RDPS; residual dispersion per span)이 랜덤하게 분포하는 광전송 링크를 고려하였다. precompensation으로 전체 분산을 조절하는 링크의 최적 NRD는 10 ps/nm이고 이 경우 유효 입사 전력 범위는 -8~1 dBm인 것을 확인하였다. 또한 postcompensation으로 전체 분산을 조절하는 링크의 최적 NRD는 -10 ps/nm이고, 유효 입사 전력 범위는 -7.5~1 dBm인 것을 확인하였다.

• 한국항행학회논문지
• /
• 제13권5호
• /
• pp.656-661
• /
• 2009

전체 잉여 분산 (NRD; net residual dispersion)이 영인 inline 분산 제어 (DM; dispersion management)가 적용된 광전송 링크에서 precompensation, postcompensation과 광 중계 거리 당 잉여 분산 (RDPS; residual dispersion per span)의 제어를 통해 $24{\times}40$ Gbps WDM 신호의 고품질 전송을 연구하였다. 시스템 성능을 양호하게 하는 RDPS 값은 WDM 채널 입사 전력에 의존하지만, 비교적 넓은 입사 전력 범위를 갖는 WDM 신호들의 시스템 성능을 동시에 효율적으로 개선할 수 있는 최적 RDPS는 210~230 ps/nm인 것을 확인하였다. 또한 RDPS가 증가할수록 최악 채널의 눈 열림 패널티 (EOP; eye opening penalty)를 1 dB 이하로 만드는 유효 입사 전력 범위가 증가되는 것을 확인하였다.

• 한국의류산업학회지
• /
• 제4권1호
• /
• pp.86-91
• /
• 2002

To estimate dispersion stability of particles, suspending power and particle size were examined as functions of pHs, surfactants, electrolytes and ionic strengths using ${\alpha}-Fe_2O_3$ particle as the model of particulate soil. Suspending power and particle size were determined by UV-Vis spectrumeter and by light scattering using the polarization ratio method, respectively. The suspending power was relatively high with polyanion electrolytes and was low with neutral salts. The suspending power was biphasis, minimum pH 6~7, and the effect of surfactant on the suspending power was insignificant. Generally suspending power increased with decreasing the particle size governed aggregation of dispersed particles regardless of solution conditions. Hence the suspending power was inversely related to the particle size.

• 전기학회논문지
• /
• 제57권9호
• /
• pp.1572-1578
• /
• 2008

The effect of the organoclay_10A nanoparticles on the DSC and Structural and Dielectrics Properties(1Hz-1MHz) for epoxy/Organoclay_10A Nanocomposites has been studied. Dielectric properties of epoxy-Organoclay nanocomposites were investigated at 1, 3, 5, 7, 9 filler concentration by weight. Epoxy nanocomposites samples were prepared with good dispersion of layered silicate using power ultrasonic method in the particles. As structural analysis, the interlayer spacing have decreased with filled nanoparticles contents increase using power ultrasonic dispersion. The maximum increase interlayered spacing was observed to decease for above 5wt% clay loading. The other hand, as decrease with concentration filler of the layered silicate were increased dispersion degree of nanoparticles in the matrix. The interesting dielectric properties for epoxy based nanocomposites systems are attributed to the large volume fraction of interfacesin the bulk of the material and the ensuring interactions between the charged nanoparticle surface and the epoxy chains.

• Journal of the Optical Society of Korea
• /
• 제18권3호
• /
• pp.207-216
• /
• 2014

In this work, we report detailed numerical analysis of the near-elliptic core index-guiding triangular-lattice and square-lattice photonic crystal fiber (PCFs); where we numerically characterize the birefringence, single mode, cut-off behavior and group velocity dispersion and effective area properties. By varying geometry and examining the modal field profile we find that for the same relative values of $d/{\Lambda}$, triangular-lattice PCFs show higher birefringence whereas the square-lattice PCFs show a wider range of single-mode operation. Square-lattice PCF was found to be endlessly single-mode for higher air-filling fraction ($d/{\Lambda}$). Dispersion comparison between the two structures reveal that we need smaller lengths of triangular-lattice PCF for dispersion compensation whereas PCFs with square-lattice with nearer relative dispersion slope (RDS) can better compensate the broadband dispersion. Square-lattice PCFs show zero dispersion wavelength (ZDW) red-shifted, making it preferable for mid-IR supercontinuum generation (SCG) with highly non-linear chalcogenide material. Square-lattice PCFs show higher dispersion slope that leads to compression of the broadband, thus accumulating more power in the pulse. On the other hand, triangular-lattice PCF with flat dispersion profile can generate broader SCG. Square-lattice PCF with low Group Velocity Dispersion (GVD) at the anomalous dispersion corresponds to higher dispersion length ($L_D$) and higher degree of solitonic interaction. The effective area of square-lattice PCF is always greater than its triangular-lattice counterpart making it better suited for high power applications. We have also performed a comparison of the dispersion properties of between the symmetric-core and asymmetric-core triangular-lattice PCF. While we need smaller length of symmetric-core PCF for dispersion compensation, broadband dispersion compensation can be performed with asymmetric-core PCF. Mid-Infrared (IR) SCG can be better performed with asymmetric core PCF with compressed and high power pulse, while wider range of SCG can be performed with symmetric core PCF. Thus, this study will be extremely useful for designing/realizing fiber towards a custom application around these characteristics.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 추계학술대회
• /
• pp.638-641
• /
• 2012

광섬유의 그룹 속도 분산 (GVD; group velocity dispersion)과 비선형 효과의 상호 작용에 의해 왜곡되는 960 Gbps 신호의 보상을 위해 분산 제어 (DM; dispersion management) 기술이 적용된 광전송 링크의 유연한 구성에 필요한 중계 구간 (fiber span)을 구성하는 단일 모드 광섬유 (SMF; single mode fiber)의 길이와 중계 구간 당 잉여 분산 (RDPS; residual dispersion per span)을 랜덤하게 분포시키는 구조에서의 전체 잉여 분산 (NRD; net residual dispersion)의 최적치와 유효 입사 전력 범위를 도출하였다.

• Journal of information and communication convergence engineering
• /
• 제5권4호
• /
• pp.377-381
• /
• 2007

Nonlinear effects and chromatic dispersion are the main causes of pulse degradation in high bit-rate WDM transmission systems and several architectures have been proposed to compensate them by means of optical phase conjugation. In this paper, a new method to exploit an optical phase conjugator (OPC) for nonlinearity and dispersion cancellation is disclosed. The proposed method is using optimal total dispersion of each fiber sections and it is simpler than those previously described in literature. Power penalty between WDM channels and the maximum launch power in $28{\times}40$ Gbps WDM transmission system designed by optimal total dispersion are more decreased and more increased than those in the conventional WDM transmission system with OPC, respectively. Furthermore, optimal total dispersion proposed in this research should provide the flexible design of WDM system, which less depends on OPC position.

• 한국항행학회논문지
• /
• 제16권5호
• /
• pp.801-809
• /
• 2012

분산 제어 (DM; dispersion management)은 파장 분할 다중 (WDM; wavelength division multiplexed) 채널의 고품질 전송을 위해 광섬유의 그룹 속도 분산 (GVD; group velocity dispersion)과 비선형 효과의 상호 작용에 의해 왜곡되는 신호의 보상할 수 있는 대표적 기술이다. DM이 적용된 광전송 링크의 유연한 구성에 필요한 중계 구간 (fiber span)을 구성하는 단일 모드 광섬유 (SMF; single mode fiber)의 길이와 중계 구간 당 잉여 분산 (RDPS; residual dispersion per span)을 랜덤하게 분포시키는 구조와 인위적으로 분포시키는 구조에서의 최적 전체 잉여 분산 (NRD; net residual dispersion)의 최적치와 유효 입사 전력 범위를 도출하였다. 고려한 SMF의 길이와 RDPS 분포 패턴 모두 precompensation으로 NRD를 조절하는 경우에서는 +10 ps/nm, postcompensation으로 NRD를 조절하는 경우에서는 -10 ps/nm이 최적 NRD라는 것을 알 수 있었다. 그리고 NRD가 상기 값으로 설정된 경우 중계 구간이 증가할수록 SMF 길이를 감소시키고, RDPS를 증가시키는 인위적인 분포의 전송 링크에서의 시스템 성능이 가장 양호하여 균일한 분포의 링크에 비해 유효 입사 전력 범위가 2 dB 정도 신장되는 것을 확인하였다.