• Journal of Bio-Environment Control
• /
• v.24 no.3
• /
• pp.135-146
• /
• 2015

To provide the data necessary to determine the design wind speed for calculating the wind load acting on a greenhouse, we measured the wind speed below 10m height and analyzed the power law exponents at Buan and Gunwi. A wind speed greater than $5m{\cdot}s^{-1}$ is appropriate for calculating the power law exponent necessary to determine the wind speed distribution function according to height. We observed that the wind speed increased according to a power law function with increased height at Buan, showing a similar trend to the RDC and JGHA standards. Therefore, this result should be applied when determining the power law function for calculating the design wind speed of the greenhouse structure. The ordinary trend is that if terrain roughness increases the value of power law exponent also increases, but in the case of Gunwi the value of power law exponent was 0.06, which shows contrary value than that of the ordinary trend. This contrary trend was due to the elevations difference of 2m between tower installed and surrounding area, which cause contraction in streamline. The power law exponent started to decrease at 7 am, stopped decreasing and started to increase at 3 pm, and stopped increasing and remained constant at 12 pm at Buan. These changes correspond to the general change trends of the power law exponent. The calculated value of the shape parameter for Buan was 1.51, confirming that the wind characteristics at Buan, a reclaimed area near the coast, were similar to those of coastal areas in Jeju.

• Wind and Structures
• /
• v.19 no.5
• /
• pp.505-522
• /
• 2014

While effects of the atmospheric boundary layer flow on engineering infrastructure are more or less known, some local transient winds create difficulties for structures, traffic and human activities. Hence, further research is required to fully elucidate flow characteristics of some of those very unique local winds. In this study, important characteristics of observed vertical velocity profiles along the main wind direction for the gusty Bora wind blowing along the eastern Adriatic coast are presented. Commonly used empirical power-law and the logarithmic-law profiles are compared against unique 3-level high-frequency Bora measurements. The experimental data agree well with the power-law and logarithmic-law approximations. An interesting feature observed is a decrease in the power-law exponent and aerodynamic surface roughness length, and an increase in friction velocity with increasing Bora wind velocity. This indicates an urban-like velocity profile for smaller wind velocities and rural-like velocity profile for larger wind velocities, which is due to a stronger increase in absolute velocity at each of the heights observed as compared to the respective velocity gradient (difference in average velocity among two different heights). The trends observed are similar during both the day and night. The thermal stratification is near neutral due to a strong mechanical mixing. The differences in aerodynamic surface roughness length are negligible for different time averaging periods when using the median. For the friction velocity, the arithmetic mean proved to be independent of the time record length, while for the power-law exponent both the arithmetic mean and the median are not influenced by the time averaging period. Another issue is a large difference in aerodynamic surface roughness length when calculating using the arithmetic mean and the median. This indicates that the more robust median is a more suitable parameter to determine the aerodynamic surface roughness length than the arithmetic mean value. Variations in velocity profiles at the same site during different wind periods are interesting because, in the engineering community, it has been commonly accepted that the aerodynamic characteristics at a particular site remain the same during various wind regimes.

• Advances in materials Research
• /
• v.12 no.1
• /
• pp.43-65
• /
• 2023

Free vibration analysis of power law and sigmoidal sandwich plates made up of functionally graded materials (FGMs) has been carried out using finite element based higher-order zigzag theory. The present model satisfies all-important conditions such as transverse shear stress-free conditions at the plate's top and bottom surface along with continuity condition for transverse stresses at the interface. A Nine-noded C0 finite element having eleven degrees of freedom per node is used during the study. The present model is free from the requirement of any penalty function or post-processing technique and hence is computationally efficient. The present model's effectiveness is demonstrated by comparing the present results with available results in the literature. Several new results have been proposed in the present work, which will serve as a benchmark for future works. It has been observed that the material variation law, power-law exponent, skew angle, and boundary condition of the plate widely determines the free vibration behavior of sandwich functionally graded (FG) plate.

• Analyses & Alternatives
• /
• v.1 no.2
• /
• pp.44-64
• /
• 2017

From the field survey of the main ethnic minority areas in the south China, it is found that political, economic, cultural and natural environmental changes are the main reasons leading to the change of customary law. The power mechanism of the customary law change include the three aspects, such as the promotion of country elite, the dominance of grassroots government, and the daily demands of the villagers, which promote the change of customary law alone or together. Through the application of customary law, the country elites can adjust and refine the rules of customary law in order to make out the new customary law and promote its development. In the current pattern of rural governance, grassroots self-government is actually the "official supervision of people's autonomy". The executive power of the grassroots government often intervene the practice of customary law and other informal rules. This is another mechanism of customary law change. Customary law arises from the practice of the daily life of the villagers. If the villagers think that the norms of customary law cannot meet the actual needs of daily life practice, the customary law will be promoted in the form of collective consultation. This is the most important dynamic practice mechanism of customary law change. Transformation and abandonment are the two ways to change customary law. No matter what kind of change does not lead to the demise of the customary law system, the demise of the customary law is only an outdated result, which is made by the universality, nature and objectivity of customary law. The procedure of customary law change is the process of continuation and rebirth about customary law. The result of the change is to produce the new customary law of keeping pace with the times, and the customary law will be presented with new content and form after the change. The continuation of customary law means the inheritance of traditional customary law, but it is based on the transformation of traditional customary law. The rebirth of customary law means that the traditional customary law is completely discarded. But it will produce new customary law rules and be based on the needs of social life practice. Customary law occupies a pivotal position in the normative system and the national law cannot be replaced. The purpose of customary law change will let the customary rules better adapt to the development of modern society, adjust the social relations more reasonably and better meet people's needs of production and life, which is decided by the character of customary law.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.42.1-42.1
• /
• 2015

We model the Spectral Energy Distribution (SED) of Class 0 protostar L1527 IRS using a radiative transfer code RADMC-3D. In addition to the photometry data from literatures, we include the Herschel/PACS data which well covers the far-infrared SED peak of L1527 IRS, providing precise constraints to the density structure and other physical properties of its circumstellar envelope. Previously, Tobin et al. (2013) presented a dust continuum modeling results using a rotating and infalling envelope (Terebey and Shu, & Cassen 1984 ; TSC envelope), which originally describes a power-law density profile (${\rho}{\propto}r-{\alpha}$) with the power-law index (${\alpha}$) of 1.5. However, we find that Herschel/PACS data are better fitted with a shallower power-law density profile. This smaller power-law might be attributed to a inner envelope. Thus, we fit the SED of L1527 IRS with a Bonnor-Ebert sphere, which is a combination of the inner flat-topped and the outer power-law (${\alpha}=2$) density profiles. This Bonnor-Ebert sphere is often used to explain the density profile of prestellar cores, which is considered the earliest stages of star formation. The well-fitted SED with a Bonnor-Ebert sphere suggests that L1527 IRS might have collapsed from a Bonnor-Ebert sphere rather than a singular isothermal sphere.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.7
• /
• pp.1391-1397
• /
• 1992

Improved power law flow model was suggested for the calculation of wake flow characteristics around the three dimensional ship stern in case of the formation of bilge vortex in the direction of stern. In comparison with the power law and Coles flow model, the flow velocity calculated based on this study was delayed around the boundary of inner layer and outer layer in reverse flow. More accurate results was obtained with this improved power law flow model by the velocity calculation around ship stern. Accuracy was validated with the comparison of other calculation results and experimental datas.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.175-179
• /
• 2007

To existing method which uses energy variation and spectrum deviation to detect the underwater transient signal is useful to detect white noise environment, but it is not useful to do colored noise environment. To improve capacity of detecting the underwater transient signal both in white noise environment and colored noise environment, this study takes advantage of Double Density Discrete Wavelet Transform and CFAR Power-Law.

• Journal of the Korean Statistical Society
• /
• v.31 no.1
• /
• pp.17-31
• /
• 2002

This paper considers noninformative priors for the power law process under failure truncation. Jeffreys'priors as well as reference priors are found when one or both parameters are of interest. These priors are compared in the light of how accurately the coverage probabilities of Bayesian credible intervals match the corresponding frequentist coverage probabilities. It is found that the reference priors have a definite edge over Jeffreys'prior in this respect.

• Korean System Dynamics Review
• /
• v.13 no.1
• /
• pp.113-131
• /
• 2012

Applying social network analysis techniques, this study examines complex system characteristics of industry-university joint research R&D networks. In specific, it focuses on whether these R&D networks comply with the power law, whose system typically presents the-rich-get-richer and the-poor-get-poor patterns. The basic data come from 7,751 industry-university joint research projects, all of which were carried out by Daejeon, Chungbuk, and Chungnam-based universities from January 2005 to October 2008. The empirical results reveal that the R&D networks abide by the power law. That is, a handful of business units and universities command an overwhelming majority in the joint links, indicating positive feedback dominance within the system.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.10 no.2
• /
• pp.41-47
• /
• 2006

The Renewal process and the Non-homogeneous Poisson process (NHPP) process are probably the most popular models for describing the failure pattern of repairable systems. But both these models are based on too restrictive assumptions on the effect of the repair action. For these reasons, several authors have recently proposed point process models which incorporate both renewal type behavior and time trend. One of these models is the Modulated Power Law Process (MPLP). The Modulated Power Law Process is a suitable model for describing the failure pattern of repairable systems when both renewal-type behavior and time trend are present. In this paper we propose Bayes estimation of the next failure time after the system has experienced some failures, that is, Mean Time Between Failure for the MPLP model. Numerical examples illustrate the estimation procedure.