• 비파괴검사학회지
• /
• 제27권2호
• /
• pp.89-96
• /
• 2007

원자력발전소 증기발생기 전열관의 건전성을 평가하기 위해서 계획예방정비 기간에 수행되는 와전류검사의 여러 가지 기법중에서 보빈 탐촉자 검사는 가장 기본적인 중요한 검사이다. 와전류 탐촉자는 검사 계통의 핵심적인 부분으로서 특정 절차서에 따라 평가가 이루어질 때 대상 시험체의 합부를 결정하는 자료를 제공하게 된다. 또한, 수집된 와전류신호의 품질은 사용되는 탐촉자의 설계특성, 기하학적 형태, 운전주파수에 따라 결정되고, 검사결과에 미치는 영향이 크기 때문에 와전류검사 탐촉자의 선정은 특히 중요하다. 본 연구에서는 국내 원전 증기발생기 전열관 검사를 위한 최적의 차동형 보빈탐촉자를 설계하였다. 또한 보빈탐촉자 시작품의 전기적 특성과 와전류신호 특성 평가를 수행하여 만족한 결과를 도출하였다.

• 한국지진공학회논문집
• /
• 제22권2호
• /
• pp.87-94
• /
• 2018

In this study, seismic performance of bushings and their connection parts was analyzed by performing shaking table tests for various types of bushings widely used as auxiliary equipment of main transformers in domestic substations. As a result of the seismic tests of five types of 154 kV bushings according to the manufacturers, all the bushings secured the structural integrity even at the acceleration of 1.4 g and it was found that leakage of insulating oil didn't occur. Also, the average acceleration amplification rate at the upper part of the bushings was about 2.5 to 3.0 times higher than the lower one. On the other hand, when a representative 345 kV bushing was subjected to the seismic test, the structural integrity was secured even at 1.0 g acceleration similar to the design earthquake load level, but in this test, leakage of insulating oil occurred. However, when a stiffener restricting the connection of the bushing is installed in the same 345 kV bushing, the displacement of the bushing connection is controlled and the stiffener prevent the oil from leaking even at the acceleration of the designed seismic level.

• 전기학회논문지
• /
• 제57권8호
• /
• pp.1392-1397
• /
• 2008

The mechanical integrity of generator stator windings is one of the critical point because the electric power is generated and conducted to power system through these windings. De-mineralized water is used to cool stator bars during the normal operation of generator in large power plants because the water cooled method has highest cooling efficient. Water absorption of bar insulation is progressed by several causes such as generation of water leak path by corrosion, delamination of insulation by vibration, and inadequate water treatment, etc.. Reliable water absorption diagnostics of generator stator bar is important to ensure the availability of power plant and to reduce maintenance cost by generator accident. It is described that the water absorption characteristics for generator stator bar insulation used in 500MW capacity standard fossil power plant by cooling water temperature. It is verified that the management of stator cooling water temperature is one of the important factors to decrease water absorption rate of generator stator bars.

• Nuclear Engineering and Technology
• /
• 제53권2호
• /
• pp.466-473
• /
• 2021

Fire protection is one of important issues to ensure safety and reduce risks of nuclear power plants (NPPs). While robust programs to shut down commercial reactors in any fires have been successfully maintained, the concept and associated regulatory requirements are constantly changing or strengthening by lessons learned from operating experiences and information all over the world. As part of this context, it is necessary not only to establish specific fire hazard assessment methods reflecting the characteristics of research reactors and educational reactors but also to make decisions based on advancement encompassing numerical analyses and experiments. The objectives of this study are to address fire simulation in the control room of an educational reactor and to discuss integrity of digital console in charge of main operation as well as analysis results through comparison. Three electrical fire scenarios were postulated and twenty-four thermal analyses were carried out taking into account two turbulence models, two cable materials and two ventilation conditions. Twelve supplementary thermal analyses and six subsequent structural analyses were also conducted for further examination on the temperature and heat flux of cable and von Mises stress of digital console, respectively. As consequences, effects of each parameter were quantified in detail and future applicability was briefly discussed. On the whole, higher profiles were obtained when Deardorff turbulence model was employed or polyvinyl chloride material and larger ventilation condition were considered. All the maximum values considered in this study met the allowable criteria so that safety action seems available by sustained integrity of the cable linked to digital console within operators' reaction time of 300 s.

• 중소기업융합학회논문지
• /
• 제4권4호
• /
• pp.19-23
• /
• 2014

Group communication is becoming increasingly popular in Internet applications such as videoconferences, online chatting programs, games, and gambling. For secure communications, the integrity of messages, member authentication, and confidentiality must be provided among group members. To maintain message integrity, all group members use the Group Key (GK) for encrypting and decrypting messages while providing enough security to protect against passive attacks. Tree-based Group Diffie-Hellman (TGDH) is an efficient group key agreement protocol to generate the GK. TGDH assumes all members have an equal computing power. One of the characteristics of distributed computing and grid environments is heterogeneity; the member can be at a workstation, a laptop or even a mobile computer. Member reordering in the TDGH protocol could potentially lead to an improved protocol; such reordering should capture the heterogeneity of the network as well as latency. This research investigates dynamic reordering mechanisms to consider not only the overhead involved but also the scalability of the proposed protocol.

• 마이크로전자및패키징학회지
• /
• 제26권4호
• /
• pp.149-156
• /
• 2019

5쌍의 Bi₂Te₃계 p-n 가압소결체 열전레그들로 구성되어 있으며 상하부 기판이 없고 내부는 polydimethylsiloxane (PDMS)로 충진되어 있는 신축열전모듈을 형성하고, 이의 신축특성과 발전특성을 분석하였다. 신축열전모듈에 변형률 0~0.1 범위의 신축변형 싸이클을 10회 인가하여도 모듈의 integrity가 잘 유지되었으며, 인장변형률이 0.2로 증가시 Cu 전극과 열전레그 사이의 접합부 파단에 의해 모듈이 open 되었다. 신축열전모듈은 열전레그 양단간의 온도차가 2.2 K일 때 4.6 mV의 open circuit 전압을 나타내었으며, 변형률 0~0.1 범위의 인장변형에 의한 open circuit 전압의 변화는 5% 미만이었다. 신축열전모듈은 0.1의 변형률로 인장된 상태에서 레그 양단간 온도차 2.2 K에 의해 18.5 ㎼의 최대발전출력을 나타내었다.

• International Journal of Aeronautical and Space Sciences
• /
• 제15권3호
• /
• pp.219-231
• /
• 2014

We develop a preliminary design optimization procedure in this paper regarding the wing planform in a solar-powered high-altitude long-endurance unmanned aerial vehicle. A high-aspect-ratio wing has been widely adopted in this type of a vehicle, due to both the high lift-to-drag ratio and lightweight design. In the preliminary design, its characteristics need to be addressed correctly, and analyzed in an appropriate manner. In this paper, we use the three-dimensional Euler equation to analyze the wing aerodynamics. We also use an advanced structural modeling approach based on a geometrically exact one-dimensional beam analysis. Regarding the structural integrity of the wing, we determine detailed configuration parameters, specifically the taper ratio and the span length. Next, we conduct a multi-objective optimization scheme based on the response surface method, using the present baseline configuration. We consider the structural integrity as one of the constraints. We reduce the wing weight by approximately 25.3 % from that in the baseline configuration, and also decrease the power required approximately 3.4 %. We confirm that the optimized wing has sufficient flutter margin and improved static longitudinal/directional stability characteristics, as compared to those of the baseline configuration.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1388-1392
• /
• 2001

In this paper, an experimental method of several modal analyses was devised to iify the vibration characteristics of G/T blade in power plants. Also, it is being applied this method to establish the standard category of natural frequency of new developed blades. So acceptance margin to avoid resonance due to nozzle waking force is being established for new blades. It is expected to improve the availability of G/T blades by using the result of this study.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.618-622
• /
• 2000

An experimental method is devised to identify the vibration characteristics of G/T blade in power plants. The acceptance margin to avoid resonance due to nozzle waking force is established and evaluated by suggested method. It is expected that improvement of turbine availability and the localization of blade can be achieved by using the result of this study.

• Nuclear Engineering and Technology
• /
• 제51권4호
• /
• pp.1117-1131
• /
• 2019

Tanks are used extensively in many engineering areas for spent fuel pool structures at nuclear power plants or for water storage tanks in bulk carriers. To ensure the structural integrity of such tanks when under dynamic loads, modal characteristics such as natural frequencies, participation factors and mode shapes should be known. Investigated in this study are the modal characteristics of a square tank by the finite element method. This approach can be used with subsequent dynamic analyses such as a response spectrum analysis or a harmonic analysis. Finite element models are prepared to determine the natural frequencies and mode shapes, which are easy to find the modal characteristics of a fluid-filled square tank. The effects of the fluid contained in the tank and the boundary conditions at top and bottom ends on the modal characteristics are assessed by several finite element analyses.