• Journal of information and communication convergence engineering
• /
• 제17권2호
• /
• pp.105-116
• /
• 2019

Recently, there has been an increase in research on wireless sensor networks (WSNs) because they are easy to deploy in applications such as internet-of-things (IoT) and body area networks. However, WSNs have constraints in terms of power, quality-of-service (QoS), computation, and others. To overcome the power constraint issues, wireless energy harvesting has been introduced into WSNs, the application of which has been the focus of many studies. Additionally, to improve system performance in terms of achievable rate, cooperative networks are also being explored in WSNs. We present a review on current research in the area of energy harvesting in WSNs, specifically on the application of simultaneous wireless information and power transfer (SWIPT) in a cooperative sensor network. In addition, we discuss possible future extensions of SWIPT and cooperative networks in WSNs.

• 한국통신학회논문지
• /
• 제42권1호
• /
• pp.149-152
• /
• 2017

본 논문에서는 에너지 하베스팅 (Energy Harvesting) 기술을 적용한 BLE (Bluetooth Low Energy) 비콘에서 전력 관리를 위한 PMIC (Power Management IC)의 출력 전압을 일정하게 유지하기 위한 방안을 연구하였다. 에너지 하베스팅 장치에서 제공되는 에너지를 확보하고 저장하기 위한 축전 장치로 캐패시터를 사용하였고, 주어진 Advertising Interval에서 BLE 모듈에 일정한 전압을 제공하기 위한 최적의 캐패시턴스를 분석하였다.

• ETRI Journal
• /
• 제39권6호
• /
• pp.803-812
• /
• 2017

A decode-and-forward system with an energy-harvesting relay is analyzed for the case when an arbitrary number of independent interference signals affect the communication at both the relay and the destination nodes. The scenario in which the relay harvests energy from both the source and interference signals using a time switching scheme is analyzed. The analysis is performed for the interference-limited Nakagami-m fading environment, assuming a realistic nonlinearity for the electronic devices. The closed-form outage probability expression for the system with a nonlinear energy harvester is derived. An asymptotic expression valid for the case of a simpler linear harvesting model is also provided. The derived analytical results are corroborated by an independent simulation model. The impacts of the saturation threshold power, the energy-harvesting ratio, and the number and power of the interference signals on the system performance are analyzed.

• 한국위성정보통신학회논문지
• /
• 제11권2호
• /
• pp.60-64
• /
• 2016

본 논문에서는 multi-tag를 사용하는 backscatter communication에 MIMO beamforming 기술을 적용하여, 수신신호의 BER과 energy harvesting을 효율을 증대시키고자 한다. multi-tag와 Hybrid-AP(H-AP) 사이의 communication을 통해 기본 채널 정보를 얻었으며, 얻은 채널정보를 이용하여, Spatial Channel Model(SCM)의 전송 시나리오에 맞는 파라미터를 설정하고 SCM 채널을 생성하였다. 그리고 MIMO Beamforming 기술을 이용하여, H-AP는 각 tag에 SINR을 올리기 위한 optimal power를 갖는 신호를 보낸다. tag에서는 optimal power를 갖는 신호를 수신하여 backscatter communication을 수행하고, receiver에서는 multi-tag가 보내는 backscatter 신호를 수신하여 time switching 기법으로 Energy harvesting을 수행한다. 따라서 Receiver에서 energy harvesting 효율과 backscatter 신호의 BER 성능 향상을 시뮬레이션을 통해 확인할 수 있었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권10호
• /
• pp.3321-3341
• /
• 2014

This paper investigates the outage performance and optimization for the four-phase two-way transmission network with an energy harvesting (EH) relay. To enable the simultaneous information processing and energy harvesting at the relay, we firstly propose a power splitting-based two-way relaying protocol (PSTWR). Then, we discuss its outage performance theoretically and derive an explicit expression for the system outage probability. In order to find the optimal system configuration parameters such as the optimal power splitting ratio and the optimal transmit power redistribution factor, we formulate an outage-minimized optimization problem. As the problem is difficult to solve, we design a genetic algorithm (GA) based algorithm for it. Besides, we also investigate the effects of the power splitting ratio, the power redistribution factor at the relay, and the source to relay distance on the system outage performance. Finally, extensive simulation results are provided to demonstrate the accuracy of the analytical results and the effectiveness of the GA-based algorithm. Moreover, it is also shown that, the relay position greatly affects the system performance, where relatively worse outage performance is achieved when the EH relay is placed in the middle of the two sources.

• 한국정보통신학회논문지
• /
• 제16권11호
• /
• pp.2487-2494
• /
• 2012

본 논문에서는 MPPT 제어 기능을 갖는 열에너지 하베스팅 회로를 설계하였다. MPPT(Maximum Power Point Tracking) 제어는 열전소자의 개방회로전압과 MPP 전압간의 관계를 이용하였으며 열전소자의 개방회로전압을 주기적으로 샘플링 함으로써 이를 이용해 MPPT 기준전압을 생성하여 이를 기준으로 부하로의 에너지 공급을 제어한다. 모의실험 결과 94%의 최대 전력 효율을 보였다. 제안된 열에너지 하베스팅 회로는 $0.35{\mu}m$ CMOS 공정으로 설계하였으며 설계된 칩 면적은 PAD를 제외하고 $1168.7{\mu}m{\times}541.3{\mu}m$이다.

• 한국정밀공학회지
• /
• 제25권9호
• /
• pp.78-85
• /
• 2008

Piezoelectric materials have been investigated as vibration energy converters to power wireless devices or MEMS devices due to the recent low power requirements of such devices and the advancement in miniaturization technology. Piezoelectric power generation can be an alternative to the traditional power source-battery because of the presence of facile vibration sources in our environment and the potential elimination of the maintenance required for large volume batteries. This paper represents the new power source which supplies energy device node. This system, called "energy harvesting system", with piezo materials scavenges extra energy such as vibration and acceleration from the environment. Then it converts the mechanical energy scavenged to electrical energy for powering device This paper explains the properties of piezo material through theoretical analysis and experiments The developed system provides a solution to overcome the critical problem of making up wireless device networks.

• 대한의용생체공학회:의공학회지
• /
• 제38권5호
• /
• pp.242-247
• /
• 2017

This study presents a bio-chemical energy harvesting system which can generate electric power from bioorganic substance contained in vermicompost. It produced electricity by inoculating microbial fuel cell(MFC) with earthworm-composted food waste. The generated electricity was converted into usable voltage level for mobile electronics through power conditioning circuits. The implemented prototype showed $200{\mu}W$ of maximum output electric power, which successfully supplied a beacon device which continuously transmitted data to nearby smartphone without a battery. The proposed system can help develop portable or bio-mimetic energy supply for sustainable use with further improvement.

• 한국정보통신학회논문지
• /
• 제24권8호
• /
• pp.1113-1116
• /
• 2020

In the EH-WSN(Energy Harvesting Wireless Sensor Network), the routing protocol must consider the power condition of nodes such as residual power and energy harvesting rate. Many EH-WSN studies have emphasized the power aspect and make the urgency of sensed data less important. However, in applications such as environmental monitoring, stability and latency become more important issues than power efficiency for urgent data. In this paper, we designed a routing protocol that can set path according to data urgency. To this end, relay nodes are determined considering the urgency of date. Nodes with poor power do not participate in routing when normal data is generated, so that urgent data can be transmitted reliably with low latency. The performance of the proposed routing protocol is analyzed by computer simulation.

• 전력전자학회논문지
• /
• 제10권3호
• /
• pp.274-281
• /
• 2005

압전소자를 에너지원으로 사용하여 자립형 전기전자시스템에 에너지를 공급하는 에너지 획득(Harvesting) 개념의 구현을 위하여, 새로운 AC/DC 공진형 펄스 컨버터를 제안한다. 컨버터는 정류기와 DC 컨버터의 2단계로 구성되었으며, AC/DC 변환을 위한 정류기는 MOSFET의 3상한 동작 특성을 이용하여 구현하고, N형 및 P형 MOSFETs을 사용하여 DC/DC 부스트 컨버터를 구현하였다. 제안된 컨버터 시스템의 동작원리 및 동작모드를 스위칭 소자의 기생캐패시턴스를 고려하여 해석하고, 시뮬레이션을 통하여 해석결과를 검증하였다. CMOS IC 칩으로 제작된 본 시스템의 실험 결과는 수십 uW 용량에서 에너지 획득 개념의 구현 가능성을 제시하였다.