• 대한통합의학회지
• /
• 제6권1호
• /
• pp.1-6
• /
• 2018

Purpose : The purpose of this study was to examine the effects of elastic taping on the power and velocity error of rectus femoris after muscle fatigue occurred. Method : The subjects of this study were 15 healthy students. The Primus RS was used to measure the power and velocity error of rectus femoris after muscle fatigue occurred. The power and velocity error were measured 3 times which are consist of pre-fatigue, after-fatigue and after 24 hours applied elastic tape on rectus femoris. A elastic tape was attached to rectus femoris between the antero inferior iliac spine (AIIS) and the tibia tuberosity. The collected data was analyzed using one-way repeated-measures ANOVA for comparison of the power and velocity error according to the measured time and Pearson test for correlation between the power and velocity error according to the measured time. Level of significance was set at 0.05. Result : No significant differences of the power and velocity error were found between $1^{st}$ and 2nd, 3rd measurements (p>.05). The power and velocity error, after 24 hours, of the applied elastic tape with muscle fatigue was significantly lower than muscle fatigue with no taping(p<.05). No significant correlations were found between the power and velocity error according to the measured time(p>.05). Conclusion : After applying the elastic tape on the rectus femoris, muscle fatigue occurred, which improved proprioception by decreasing movement error. It will be an important intervention to prevent musculoskeletal injuries and to enhance the motor control in exercise.

• 한국컴퓨터정보학회논문지
• /
• 제23권8호
• /
• pp.51-57
• /
• 2018

In this paper, we investigate the impact of channel estimation error on the D2D power control algorithm. In the previous work, D2D power control algorithm has been proposed under the assumption that the channel between the transmitter and the corresponding receiver is perfectly estimated. In reality, the channel estimation error is more often the case. The first question is that the power control algorithm designed for perfect channel estimation is still valid under the channel estimation error environment ? The second question is, if it is not valid, what could be the possible remedy for the channel estimation error ? In this paper, to answer the first question, we investigate the impact of the channel estimation error on the power control algorithm. We first review the D2D power control algorithm designed for perfect channel estimation. Then, we model the channel estimation error. Finally, we summarize the main results observed from the analysis of the simulation.

• 전기학회논문지
• /
• 제67권2호
• /
• pp.158-164
• /
• 2018

Wind power forecast is critical for efficient power system operation. However, wind power has high forecasting errors due to uncertainty caused by the climate change. These forecasting errors can have an adverse impact on the power system operation. In order to mitigate the issues caused by the wind power forecasting error, wind power curtailment and energy storage system (ESS) can be introduced in the power system. These methods can affect the economics of wind power resources. Therefore, it is necessary to evaluate the economics of the methods for mitigating the wind power forecasting error. This paper attempts to analyze the economics of wind power curtailment and ESS operation for mitigating wind power forecasting error. Numerical simulation results are presented to show the economic impact of wind power curtailment and ESS operation.

• 한국지능시스템학회:학술대회논문집
• /
• 한국지능시스템학회 2007년도 추계학술대회 학술발표 논문집
• /
• pp.183-186
• /
• 2007

We introduction some properties for fuzzy power function of performance of a test. First we define fuzzy type I error and type II error for the probability of the two types of error. And we show that an fuzzy error probability of one kind can only be reduced at cost of increasing the other fuzzy error probability.

• ETRI Journal
• /
• 제30권6호
• /
• pp.799-806
• /
• 2008

In this paper, a new design for an error correcting code (ECC) is proposed. The design is aimed to build an ECC circuitry with minimal power consumption. The genetic algorithm equipped with the symbiotic mechanism is used to design a power-efficient ECC which provides single-error correction and double-error detection (SEC-DED). We formulate the selection of the parity check matrix into a collection of individual and specialized optimization problems and propose a symbiotic evolution method to search for an ECC with minimal power consumption. Finally, we conduct simulations to demonstrate the effectiveness of the proposed method.

• Journal of Electrical Engineering and Technology
• /
• 제13권6호
• /
• pp.2168-2177
• /
• 2018

The unavoidable forecast error of wind power is one of the biggest obstacles for wind farms to participate in day-ahead electricity market. To mitigate the deviation from forecast, installation of energy storage system (ESS) is considered. An accurate model of wind power forecast error is fundamental for ESS sizing. However, previous study shows that the error distribution has variable kurtosis and fat tails, and insufficient measurement data of wind farms would add to the difficulty of modeling. This paper presents a comprehensive way that makes the use of mixed skewness model (MSM) and copula theory to give a better approximation for the distribution of forecast error, and it remains valid even if the dataset is not so well documented. The model is then used to optimize the ESS power and capacity aiming to pay the minimal extra cost. Results show the effectiveness of the new model for finding the optimal size of ESS and increasing the economic benefit.

• 한국인터넷방송통신학회논문지
• /
• 제19권5호
• /
• pp.79-85
• /
• 2019

본 연구에서는 Long Short Term Memory (LSTM) 신경망과 Gated Recurrent Unit(GRU) 신경망을 Internet of Things (IoT) 파워미터에 적용하여 단기 전력사용량 예측방법을 제안하고, 실제 가정의 전력사용량 데이터를 토대로 예측 성능을 분석한다. 성능평가 지표로써 Mean Absolute Error (MAE), Mean Absolute Percentage Error (MAPE), Mean Percentage Error (MPE), Mean Squared Error (MSE), Root Mean Squared Error (RMSE)를 이용한다. 실험 결과는 GRU 기반의 모델이 LSTM 기반의 모델에 비해 MAPE 기준으로 4.52%, MPE 기준으로 5.59%만큼의 성능개선을 보였다.

• 한국태양에너지학회 논문집
• /
• 제29권3호
• /
• pp.1-11
• /
• 2009

Heliostat sun tracking accuracy could be the most important requirement in solar thermal power plant, since it determines the overall efficiency of power plant. This study presents the effect of geometrical errors on the heliostat sun tracking performance. The geometrical errors considered here are the mirror canting error, encoder reference error, heliostat position error. pivot offset and tilt error, gear backlash and mass unbalanced effect error. We first investigate the effect of each individual geometrical error on the sun tracking accuracy. Then, the sun tracking error caused by the combination of individual geometrical error is computed and analyzed. The results obtained using the solar ray tracing technique shows that the sun tracking error due to the geometrical error is varying almost randomly. It also shows that the mirror canting error is the most significant error source, while the encoder reference error and gear backlash are second and the third dominant source of errors.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권11호
• /
• pp.503-507
• /
• 2005

Both ratio error and phase angle error in voltage transformer(VT) depend on values of VT burden used. Thus, precise measurement of burden is very important for the evaluation of VT. A method of evaluation for VT burden has been developed by employing the portable decade resistor, with AC-DC resistance difference less than 10-3. The burden value(value and power factor) can be obtained by conductance and susceptance, obtained by measuring the change of ratio error and phase angle error caused by the resistance change of decade resistor. The burden value and power factor obtained by the method are consistent with those obtained using power analyzer within corresponding uncertainties.

• 한국지능시스템학회논문지
• /
• 제19권2호
• /
• pp.180-184
• /
• 2009

저전력 환경에서의 메모리 집적도가 증가함에 따라 메모리는 soft error에 매우 민감해졌다. 오류 정정 코드는 일반적으로 양산 이후 메모리의 soft error를 수정하기 위해서 사용된다. 본 논문에서는 새로운 저전력 오류 정정 코드의 설계방법을 제안한다. 오류 정정 코드의 전력소비는 parity check 행렬의 선택을 통해 최소화 될 수 있다. 따라서 오류 정정 코드의 설계는 비선형 최적화 문제로 포함되는데 우리는 다양한 유전 연산자를 포함하는 유전자 알고리즘을 이용하여 이 문제를 해결한다. 제안하는 방법을 Hamming code와 Hsiao code에 적용하여 그 효율성을 입증하였다.