• Journal of Energy Engineering
• /
• v.26 no.4
• /
• pp.127-142
• /
• 2017

After individual consumption tax on bituminous coal has been imposed by Korean government after 2014 Jul, we analyse the influence of tax and conclude that the consumption of high calorie coal has been increased and that of low/middle calorie coal has been decreased. And also, the average calorie of coal consumption has been increased and the more fuel cost happens on account of the average calorie increase. Those effects have been caused by the current tax imposition system which does not reflect the bituminous coal trait. The motivation of oversea resource development and the effort of coal blending skill have been decreased because of the current tax policy. We suggest 2 ways of the tax policy improvement system[1. tax imposition system in proportion to 5,000kcal/kg, 2. 15 stages(1 stage : 200kcal/kg) segmentation tax imposition system equal to the tax/(5,000kcal/kg)] to increase the current tax amount, to prevent the coal consumption distortion and to remove the further fuel cost.

• Nuclear Engineering and Technology
• /
• v.53 no.2
• /
• pp.430-438
• /
• 2021

The spatial distribution of neutron flux or reaction rate was calculated by cell or mesh tally in traditional Monte Carlo simulation. However, either cell or mesh tally leads to the increase of memory consumption and simulation time. In this paper, the function expansion tally (FET) method was developed in Reactor Monte Carlo code RMC to solve this problem. The FET method was applied to the tallies of neutron flux distributions of uranium block and PWR fuel rod models. Legendre polynomials were used in the axial direction, while Zernike polynomials were used in the radial direction. The results of flux, calculation time and memory consumption of different expansion orders were investigated, and compared with the mesh tally. Results showed that the continuous distribution of flux can be obtained by FET method. The flux distributions were consistent with that of mesh tally, while the memory consumption and simulation time can be effectively reduced. Finally, the convergence analysis of coefficients of polynomials were performed, and the selection strategy of FET order was proposed based on the statistics uncertainty of the coefficients. The proposed method can help to determine the order of FET, which was meaningful for the efficiency and accuracy of FET method.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.7
• /
• pp.771-777
• /
• 2013

This paper describes a study of major shipyard's electrical network and simulation of applying flywheel energy storage system on the electrical network at shipyard for shore-power to ships and offshore plants in order to save fuel consumption on engines, mitigate voltage sags, and prevent blackout due to pulsed load and fault, resulting in reduction of air emission into atmosphere. The proposed energy recycling method with FESS (Flywheel Energy Storage System) can be applied for electrical power system design of heavy cranes at shipyards.

• Architectural research
• /
• v.19 no.4
• /
• pp.101-108
• /
• 2017

The use of the air conditioner is increasing due to the rise of the outdoor temperature during summer, and the problems of the fire and the cooling performance deterioration are caused due to lack of maintenance of the outdoor unit. In particular, overall performance of cooling system and efficiency in outdoor units have been degraded due to an intake of high-temperature outdoor air thereby increasing cooling energy and operating cost. Thus, this study aimed to increase efficiency of outdoor units by evaporating and cooling intake air through mist spray at the intake port surface in the outdoor unit. The measurements results showed that total power consumption of misting outdoor unit compared to that of conventional outdoor units was reduced by 21% approximately, and total power consumption of the entire system including pump was reduced by 16.7%. In addition, the operating cost including water use was reduced by 13.5% approximately. In summary, if a mist-spray nozzle kit is installed in air-cooled outdoor units, the reduction in the usage of cooling energy and operating cost will be achieved without replacement of existing cooling systems or a large scale of repairs.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.6
• /
• pp.46-51
• /
• 2012

Fuel Cell Hybrid Vehicles (FCHVs) have become a major topic of interest in the automotive industry owing to recent energy supply and environmental problems. Several types of power management strategies have been developed to improve the fuel economy of FCHVs including optimal control strategy based on optimal control theory, rule-based strategy, and equivalent consumption minimization strategy (ECMS). The ECMS is applied in this study. This strategy is based on the heuristic concept that the usage of the electric energy can be exchanged to equivalent fuel consumption. This strategy is known as one of the promising solutions for real-time control of hybrid vehicles. The ECMS for an FCHV is introduced in this paper as well as the equivalent fuel consumption parameter. The relationship between the battery final state of charge (SOC) and the fuel consumption while changing the equivalent fuel consumption parameter is obtained for three different driving cycles. The function of the equivalent fuel consumption parameter is also discussed.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.4
• /
• pp.351-355
• /
• 2015

This paper explained the application of a lithium-ion battery energy storage system to electric propulsion ships. The power distribution in electric propulsion ships has low power quality because of the variation in the power consumption of the propulsion motor. For proper operation of the ship, the power quality needs to be improved, and the battery energy storage system is used to solve power-quality problems. The simulation models of electric propulsion ship and battery energy storage systems are constructed on MATLAB/Simulink to verify the improvement in power quality. The proposed system is applied in various scenarios of the propulsion motor state. The power quality achieved by using the battery energy storage system in both voltage and frequency satisfies the standards set by IEC-60092/101.

• Journal of Integrative Natural Science
• /
• v.15 no.2
• /
• pp.89-97
• /
• 2022

This paper presents the comprehensive feasibility study of solar mini-grid project located in Bajhang District, Sudur Paschim Province, Nepal. The study has been conducted with the aim of developing a suitable size solar mini-grid system to meet electricity demand of proposed settlements of the village people. The study forecasts that the estimated average daily peak power consumption of load is about 20kW and average daily energy demand of load is about 100-150kWh/day in the base year 2022. The shared ratio of productive end uses is about 25% of the total power consumption and about 27% of the total energy demand, which will be used for small business/income generation activities and required 45kWp size solar power generation mini-grid system. The estimated project cost for the proposed 45kW solar mini-grid system technology, including 3 years of operation & maintenance, as well as power distribution network up to end user's premises is about 0.24 million USD. It is concluded that 45kWp photovoltaic mini-grid is feasible for the location.

• Journal of Information Processing Systems
• /
• v.17 no.4
• /
• pp.721-736
• /
• 2021

For the mobile edge computing (MEC) system supporting dense network, a joint allocation algorithm of computing and communication resources based on reinforcement learning is proposed. The energy consumption of task execution is defined as the maximum energy consumption of each user's task execution in the system. Considering the constraints of task unloading, power allocation, transmission rate and calculation resource allocation, the problem of joint task unloading and resource allocation is modeled as a problem of maximum task execution energy consumption minimization. As a mixed integer nonlinear programming problem, it is difficult to be directly solve by traditional optimization methods. This paper uses reinforcement learning algorithm to solve this problem. Then, the Markov decision-making process and the theoretical basis of reinforcement learning are introduced to provide a theoretical basis for the algorithm simulation experiment. Based on the algorithm of reinforcement learning and joint allocation of communication resources, the joint optimization of data task unloading and power control strategy is carried out for each terminal device, and the local computing model and task unloading model are built. The simulation results show that the total task computation cost of the proposed algorithm is 5%-10% less than that of the two comparison algorithms under the same task input. At the same time, the total task computation cost of the proposed algorithm is more than 5% less than that of the two new comparison algorithms.

• Journal of Engineering Education Research
• /
• v.13 no.5
• /
• pp.3-7
• /
• 2010

As 10th energy consumption country in the world, it is very important to educate the importance of the energy to the elementary school students. The purpose of this class is to let the pupils understand the mechanisms and performances of tidal power generation as a renewable energy application system. To satisfy the educational goals, a lecture material and a simple type of tidal power generator kit is developed. As the survey result after lecture and experiments which include assembly and test, 'Well understood' is marked as 90% among 58 elementary students, and moreover 70% among them feel to participate in higher level course. This project shows the possibility and effect of the renewable energy education course as a service engineering, which is managed and carried out by undergraduates for pupils under the professor's guide.

• International journal of advanced smart convergence
• /
• v.12 no.1
• /
• pp.101-107
• /
• 2023

Machine tools are widely used in mechanical manufacturing corporations, as well as in engineering courses at universities in Vietnam. The PINACHO S-90/200 lathe is particularly popular. This paper aims to research and select an optimal cutting depth to minimize power costs and ensure surface roughness quality when machining upper plain cylindrical turning products with the PINACHO S-90/200 lathe on C45 steel material.