International journal of advanced smart convergence

The Institute of Internet, Broadcasting and Communication (한국인터넷방송통신학회)
권호 표지
DOI QR코드

DOI QR Code

Effect Of Cut Depth On Rough Quality And Energy Consumption When Turing Cylindrical With The Pinacho S-90/200 Lathe

  • Sang Van, Nguyen (Department of Technology Dong Nai Technology University) ;
  • Fadhli, Ranuharja (Department of Electrical Engineering, Universitas Negeri Padang)
  • Received : 2023.01.19
  • Accepted : 2023.01.25
  • Published : 2023.03.31
Download PDF
⟨ Previous Next ⟩

Abstract

Machine tools are widely used in mechanical manufacturing corporations, as well as in engineering courses at universities in Vietnam. The PINACHO S-90/200 lathe is particularly popular. This paper aims to research and select an optimal cutting depth to minimize power costs and ensure surface roughness quality when machining upper plain cylindrical turning products with the PINACHO S-90/200 lathe on C45 steel material.

Keywords

References

  1. Boley, Bruno A. "The determination of temperature, stresses, and deflections in two-dimensional thermoelastic problems." Journal of the Aeronautical Sciences 23, no. 1 (1956): 67-75. https://doi.org/10.2514/8.3503
  2. Boley, Bruno A., and Jerome H. Weiner. Theory of thermal stresses. Courier Corporation, 2012.
  3. 0Jahanshahi, A. "Quasi-static stresses due to moving temperature discontinuity on a plane boundary." (1966): 814- 816. https://doi.org/10.1115/1.3625187
  4. Landau, H. G., J. H. Weiner, and E. E. Zwicky Jr. "Thermal stress in a viscoelastic-plastic plate with temperaturedependent yield stress." (1960): 297-302. https://doi.org/10.1115/1.3643955
  5. McKee, R. E., R. S. Moore, and O. W. Boston. "A study of heat developed in cylindrical grinding." Transactions of the American Society of Mechanical Engineers 73, no. 1 (1951): 21-33. https://doi.org/10.1115/1.4016127
  6. Kumar, Raman, Paramjit Singh Bilga, and Sehijpal Singh. "Multi objective optimization using different methods of assigning weights to energy consumption responses, surface roughness and material removal rate during rough turning operation." Journal of cleaner production 164 (2017): 45-57. https://doi.org/10.1016/j.jclepro.2017.06.077
  7. Sahinoglu, Abidin, Mohammad Rafighi, and Ramanuj Kumar. "An investigation on cutting sound effect on power consumption and surface roughness in CBN tool-assisted hard turning." Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 236, no. 3 (2022): 1096-1108. https://doi.org/10.1177/09544089211058021
  8. Karaaslan, Faruk, and Abidin Sahinoglu. "Determination of ideal cutting conditions for maximum surface quality and minimum power consumption during hard turning of AISI 4140 steel using TOPSIS method based on fuzzy distance." Arabian Journal for Science and Engineering 45 (2020): 9145-9157. https://doi.org/10.1007/s13369-020-04635-y
  9. Sahinoglu, Abidin, and Mohammad Rafighi. "Optimization of cutting parameters with respect to roughness for machining of hardened AISI 1040 steel." Materials Testing 62, no. 1 (2020): 85-95. https://doi.org/10.3139/120.111458
  10. Bilga, Paramjit Singh, Sehijpal Singh, and Raman Kumar. "Optimization of energy consumption response parameters for turning operation using Taguchi method." Journal of cleaner production 137 (2016): 1406-1417. https://doi.org/10.1016/j.jclepro.2016.07.220
  11. Wang, Qiulian, Fei Liu, and Xianglian Wang. "Multi-objective optimization of machining parameters considering energy consumption." The International Journal of Advanced Manufacturing Technology 71 (2014): 1133-1142. https://doi.org/10.1007/s00170-013-5547-z
  12. Olatunde, Gbenga A., Griffiths G. Atungulu, and Deandrae L. Smith. "One-pass drying of rough rice with an industrial 915 MHz microwave dryer: Quality and energy use consideration." Biosystems engineering 155 (2017): 33-43. https://doi.org/10.1016/j.biosystemseng.2016.12.001
  13. Vu, Ngoc-Chien, Xuan-Phuong Dang, and Shyh-Chour Huang. "Multi-objective optimization of hard milling process of AISI H13 in terms of productivity, quality, and cutting energy under nanofluid minimum quantity lubrication condition." Measurement and Control 54, no. 5-6 (2021): 820-834. https://doi.org/10.1177/0020294020919
  14. Sahinoglu, Abidin, and Efehan Ulas. "An investigation of cutting parameters effect on sound level, surface roughness, and power consumption during machining of hardened AISI 4140." Mechanics & Industry 21, no. 5 (2020): 523. https://doi.org/10.1051/meca/2020068
  15. Li, Rongrong, Chujun He, Wei Xu, and Xiaodong Wang. "Modeling and optimizing the specific cutting energy of medium density fiberboard during the helical up-milling process." Wood Material Science & Engineering (2022): 1-8. https://doi.org/10.1080/17480272.2022.2049867