• 정보저장시스템학회논문집
• /
• 제7권2호
• /
• pp.53-59
• /
• 2011

We have developed a compact and high-power mode-locked fiber laser for multilayered optical memory. Fiber lasers have the potential to be compact and stable light sources that can replace bulk solid-state lasers. To generate high-power pulses, we used stretched-pulse mode locking. The average power and pulse width of the output pulse from the fiber laser that we developed were 109 mW and 2.1 ps, respectively. The dispersion of the output pulse was compensated with an external single-mode fiber of 2.5 m length. The pulse was compressed from 2.1 ps to 93 fs by dispersion compensation. The fiber laser we have developed is possible to use as a light source of multilayered optical memory. We also present a fiber confocal microscope as an alignment-free readout system of multilayered optical memories. The fiber confocal microscope does not require fine pinhole position alignment because the fiber core is used as the point light source and the pinhole, and both of which are always located at the conjugated point. The configuration reduces the required accuracy of pinhole position alignment. With these techniques we can present an all-fiber recording and readout system for multilayered memories.

• Current Optics and Photonics
• /
• 제8권4호
• /
• pp.421-426
• /
• 2024

The use of stimulated emission depletion (STED) microscopy has significantly improved resolution beyond the limits imposed by diffraction; Furthermore, STED microscopy adopts a 4Pi-geometry to achieve an isotropic improvement in resolution. In isoSTED microscopy, a polarizing beam splitter and retarders are used in a 4Pi cavity to split beams of identical power, generating constructive and destructive interference for lateral and axial resolution improvements, respectively. The precise alignment of the retarders is crucial for optimizing the performance of isoSTED microscopy, because this orientation affects the quality of the depletion focus, necessitating zero intensity at the center. Incomplete destructive interference can lead to unwanted fluorescence inhibition, resulting in degraded resolution and contrast. However, measuring the intensity and polarization state in each optical path of the 4Pi cavity is complex and requires additional devices such as a power meter. Here, we propose a simple and accurate alignment method for the 4Pi cavity in isoSTED microscopy. Our approach demonstrates the equal allocation of power between upper and lower beam paths and achieves complete destructive interference using a polarizing beam displacer and a single CCD camera positioned outside the 4Pi cavity.

• 소음진동
• /
• 제4권1호
• /
• pp.33-42
• /
• 1994

When a vibration is generated due to the misalignment, the reduction of the vibration level is not attainable unless a correct shaft alignment is conducted. In a turbine system, an alignment procedure requires quite a lot amount of expense and time. To reduce this effort, an algorithm of the turbine alignment is developed to be used in the computer program. The program consists of five parts : input, calculation, display of the results, file management, and printer output. In the input part, users must provide the data on the turbine number, the reference value of the alignment, and the number of the feet of the generator. In calculation, the moving distance of the bearing and the necessary amount of the shims are calculated. In the display and the output parts, the calculated results are displayed and calculated. In the display and the output parts, the calculated results are displayed and printed. Then, by using the file management, results and procedures conducted are saved in the floppy diskette or in the hard disk. The developed program can be run in IBM PC compatible with more than 640 KB of main memory with the operating system of MS-DOS v 3.3 or higher. It is developed for novice users with no experience or specialty in this field. The program is not only useful in the power plant application, but also helpful for recording of the alignment procedures.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2005년도 특별논문집
• /
• pp.134-137
• /
• 2005

Recently, in VLCC, shafting system is stiffer due to large engine power whereas hull structure is more flexible due to scantling optimization, which can be suffered from alignment damage by incompatibility between shafting and hull, In this study, shafting system without stern tube forward bush was adapted for less sensitive system against external factors. Also, shaft alignment analysis was considered with hull deflection at various ship loading conditions and stern tube after bush of long journal bearing was evaluated by static squeezing pressure and dynamic oil film pressure with sloping control. Whirling vibration was also reviewed to avoid resonance with propeller blade order. So, reliable shafting design for VLCC could be achieved through optimized alignment analysis for the system without stern tube forward bush.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2005년도 특별논문집
• /
• pp.206-210
• /
• 2005

As design trends has changed to have flexible aft hull structure, increased power output and stiffer shafting system, owners and classification societies have more concerned about shaft alignment. In the shaft alignment analysis, there are many uncertainties which are related in propeller generated force, bearing stiffness, crank shaft model and etc. in this study, it is focused on the effect of crankshaft model by comparing between equivalent model and actual crankshaft model.

• 한국위성정보통신학회논문지
• /
• 제9권1호
• /
• pp.90-96
• /
• 2014

본 논문은 무선충전기에 있어서 효율 증대 기법에 관한 것으로, 송수신 장치간 정렬상태를 수신 장치인 스마트폰에 표시할 수 있는 방법을 제시한다. 구현된 무선충전기는 세계 표준인 WPC( Wireless Power Consortium ) 방식을 기반으로 되어 있어 수 100kHz 이하의 주파수로 동작하고 누설 자속을 최소화할 수 있도록 자기장 차폐제를 사용한 송수신 코일 구조를 갖는다. 송수신 장치의 정렬 상태를 확인할 수 있는 종래 방식은 수신단 코일의 수신 레벨만을 표시하는 단순 방식이지만 본 방식은 수신 장치의 위치까지 알 수 있어 보다 진보된 방식이라 할 수 있다. 무선 충전기 송수신 장치의 정렬상태 검출을 위하여 수신 코일의 위치변화와 자기장 세기가 서로 선형관계에 있음을 확인하고 삼각측량법을 이용하여 이 선형관계가 위치 정보로 변환될 수 있음을 보였다. 실험을 통하여 선형관계에 영향을 미칠 수 있는 요소들을 분석하고 이 요소들을 최적화한 상태에서의 선형 특성을 가질 수 있음을 보였다.

• 한국인터넷방송통신학회논문지
• /
• 제18권2호
• /
• pp.33-48
• /
• 2018

본 연구에서는 K 사용자 다중 셀 다중 입력 다중 출력 (MIMO) 가우시안 간섭 채널에 대한 조인트 간섭 정렬 및 전력 할당 전략을 특성화한다. 수신기에서 스 태거 드 안테나 스위칭을 통해 블라인드 (blind) 간섭 정렬을 갖는 MIMO 간섭 채널을 고려한다. 우리는 채널 상태 정보가 알려지지 않았다고 가정하여 협동 셀 에지 (CE) 모바일 사용자 (MU)에 대한 전력 할당 및 실행 가능성 조건을 탐구한다. 제안 된 기법의 전송 전략에 대한 새로운 통찰은 송신기에 기존 안테나가 장착 된 부분 협업 CE MU (무작위로 생성 된 전송 전략)와 계획적이다. 리시버에는 재구성 가능한 멀티 모드 안테나 (스 태거 드 안테나 스위칭 패턴)가 장착되어 있으며 수신기는 사전 설정된 T 모드를 전환한다. 제안 된 기법은 원하는 신호와 간섭 신호를 지원하고 정렬하여 제거한다. 수신 된 신호는 대응하는 독립적 인 신호 부분 공간을 가져야하기 때문에, 공통 간섭 신호를 수신한다. 재구성 가능한 다중 모드 안테나를 사용하는 K 사용자 다중 셀 MIMO 가우시안 간섭 채널의 총 용량을 완벽하게 나타낸다.

• 한국광학회지
• /
• 제33권6호
• /
• pp.245-251
• /
• 2022

타일형 결맞음 빔결합 연구를 위하여 시드 공유형 다채널 광섬유 레이저 및 출력단, 다중 빔 정렬 기술을 개발하였다. 광섬유 레이저는 7개의 채널을 갖고, 각각의 채널당 출력 10 W 이상으로 시드, 전치 증폭기, 광 분배기, 주 증폭기로 구성된 master oscillator power amplifier 구조이다. 레이저 빔 시준 및 정렬을 위하여 틸팅 기능이 가능한 출력단을 개발하였다. 출력단은 채움값을 높이기 위하여 원통형 구조로 제작하였으며, 광섬유 엔드캡의 결합이 가능하게 하였고, 출력단 내부에 PZT를 장착하여 틸팅 기능을 구현하였다. 다중 채널 레이저의 각 채널 빔을 표적의 한 점으로 정렬하기 위하여 stochastic parallel gradient decent (SPGD) 알고리즘을 적용하였다. SPGD 알고리즘을 이용한 PZT 제어를 통해 다중 빔 정렬을 성공적으로 구현하였다. 다중 빔 정렬 기술을 이용한 결맞음 빔결합 기술 개발이 기대된다.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.271-274
• /
• 1999

We are investigating epitaxially grown YBa$_2Cu_3O_x$(123) on MgO single crystal by partial melting process for high power application. After fabricating of BaCuO$_2$(011), Y$_2BaCuO_5$(211) powder, we made YBa$_2Cu_3O_x$(123) Paste with just mixing of (211), (011) and CuO(001) powders. Screen printing method was used to coat YBa$_2Cu_3O_x$(123) paste on MgO single crystal. To reduce the reaction in low temperature, rapid heating was conducted at partial melting temperature. The film was analysed with the difference of cooling-rate, thickness, reaction temperature by XRD, SEM, in-plane alignment, out-of-plane alignment, temperature-resistivity characteristics.

• 대한물리치료과학회지
• /
• 제10권1호
• /
• pp.90-101
• /
• 2003

Gait analysis can provide a better understanding of how the alignment of the lower limb and foot can contribute to force observed at the knee. Anatomic and mechanical factors that affect loading in the knee pint can contribute to pathologic change seen at the knee in degenerative pint disease and should be considered in treatment plan. The purpose of this study is to present the gait analysis data and to determine whether there is any relationships between alignment of the lower limb, foot progression angle and knee pint moments in elderly healthy women with 3-dimensional motion analyzer. The results were as follows; 1. Cadence showed 114.8 steps/min, gait speed showed 1.05 m/s, time per a stride showed 1.06 sec, time per a step showed 0.53 sec, single-supporting phase was 0.41 sec, double-supporting phase was 0.24 sec, stride length was 1.04 m, Step length was 0.56 m. 2. According to the parameters of kinematics, the maximal knee flexion angle through swing phase showed left $46.82^{\circ}$, right $40.19^{\circ}$ and the maximal knee extension angle showed left $-1.32^{\circ}$, right $2.01^{\circ}$. knee varus showed left $26.90^{\circ}$, right $30.93^{\circ}$. 3. Moment, one of kinetic parameters of knee pint the maximal flexion moment showed left 0.363. Nm/kg, right 0.464 Nm/kg and maximal extension moment showed left 0.389 Nm/kg, right 0.463 Nm/kg. The maximal. adduction moment showed left 0.332 Nm/kg, right 0.379 Nm/kg and the maximal internal rotatory moment showed left 0.13 Nm/kg, right 0.140 Nm/kg. 4. On sagittal plane, the maximal power of knee joint showed left 0.571 J/kg, right 0.629 J/kg. On coronal plane, the maximal power of knee joint showed left 0.11 J/kg, right 0.12 J/kg. On transverse plane, the maximal power of knee joint showed left 0.058 J/kg, right 0.072 J/kg. 5. The subject who had varus alignment of the lower extremity had statistically higher in knee adduction moment in mid stance phase. 6. The subject who had large foot progression angle had statistically lower in knee adduction moment in late stance phase. A relationship was observed between the alignment of the lower extremity and the adduction moment of the knee joint during stance phase. Hence, we need some research to figure, out the change of adduction moment according to the sort of knee joint osteoarthritis and the normal geriatrics as well. And we also require more effective, specific therapeutic program by making use of those background of researches.