• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.2 no.2
• /
• pp.37-44
• /
• 2003

Composite materials are widely used to make all kinds of machine parts, internal and structural materials of cars, aerospace industries, building structures, ship materials, sporting goods and others. It is worth the while to use composite materials as various substitutions when compared With others. But the use is limited in the field of the mechanical processing because of its difficulties in cutting. The surface roughness of in and out in the hole processing was discussed after cutting the GFRP with HSS drill in the vertical machining center. And it is observed that as it processed more, the powdered chip may be got more than the fluid type long chip.

• Korean Journal of Materials Research
• /
• v.18 no.8
• /
• pp.432-437
• /
• 2008

Titanium oxide films and powders are attached onto carbon cloths via RF reactive sputtering and an epoxy resin mixture, respectively. $TiO_2$/carbon composite materials were used to investigate the photoelectrochemical degradation of perchlorate ions in water. The energy band gaps of the RF-sputtered $TiO_2$ thin films ranged from 3.35-3.44 eV. A photocurrent of the powdered $TiO_2$ as illuminated by ultra-violet light for 30 min. was $2.79\;mA/cm^2$. Perchlorate ions in water were shown to be degradable by a UV-illuminated $TiO_2$ powder/carbon/Nafion/carbon composite.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.1
• /
• pp.81-86
• /
• 1997

Spray dried powdered juice was processed from concentrated extract of jujube(Zizyphus jujuba MILLER). Spray drying of the extract solution could not be operated to have powder product by itself over whole concentration range and required addition of some carrier or support material. The concentrated extract of 26$^{\circ}$Bx was combined with carrier material solution to have a final concentration of 30$^{\circ}$Bx, and then spray dried. Proper addition level of carrier solid for physical and flavor quality of the powder product was determined to be 1 : 1 ratio to jujube solid. Combined use of maltose and gum arabic produced the best quality product among the studied carrier materials, which were maltose, dextrin, condensed milk and gum arabic. Enzymatic treatment in extraction process could increase the yield by 13~39%, but hurt the sensory quality of powdered juice. Treatment by 0.5% pectinase(0.05 unit/ml) may be used with lesser quality change for improved yield.

• International Journal of Precision Engineering and Manufacturing
• /
• v.8 no.1
• /
• pp.11-15
• /
• 2007

Composite materials are widely used to make all kinds of machine parts, internal and structural materials of cars, aerospace components, building structures, ship materials, sporting goods and others, It is worth while to use composite space substitute material in various applications when compared with others. But the use of composite material is limited in the field of the mechanical processing because of the difficulties in processing. Thus, it is proved that the surface is rough at the in and out sections of the hole processing when the GFRP is machined with HSS drill in the vertical machining center. And it is observed that the more it is processed, the more the fluid type long chip is changed into the powdered chip.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.722-723
• /
• 2006

A new method has been developed to fabricate microcomponents by a combination of photolithography and sintering of metallic powder mixtures, without the need for compression and the addition of Mg. This involves (1) the fabrication of a micromould, (2) mould filling of the powder/binder mixture, (3) debinding and (3) sintering. The starting powdered materials consisted of a mixture of aluminium powder(average size of 2.5 um) and alloying elemental powder of Cu and Sn(less than 70nm), at appropriate proportions to achieve nominal compositions of Al-6wt%Cu, Al-6wt%Cu-3wt%Sn. This paper presents detailed investigation of debinding behaviour and microstructural development.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.343-344
• /
• 2008

A measurement method of the dielectric constant of materials whose standard sample is not prepared easily is proposed. The unprepared sample of the material is placed in a cavity, and the resonant frequency is measured. A commercial software simulates the same sample and the cavity leading to find the correct dielectric constant. The measured samples include a ceramic, a forced glass, and a powdered enamel.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.793-796
• /
• 2004

In domestic, various repair materials and method systems to keep up with these reinforced concrete deteriorated due to salt damage, carbonation. chemical decay et. being developed and applied. However, present polymer cement mortar applied to section restoration system cause the problem of long-term working and economica] efficiency. because that is divided into two process of liquid corrosion prevention agent and polymer cement mortar. In this background, accelerated test with due regard to $3\%$ NaCl soaking and autoclave cure was performed to confirm steel bar corrosion prevention properties of polymer cement mortar mixed with corrosion prevention agent of powdered type. In conclusion. we confirmed application possibility and excellency of steel bar corrosion prevention properties of polymer cement mortar mixed with corrosion prevention agent of powdered type comparing general polymer cement mortar applied to section restoration system of present study.

• Korean Journal of Food Science and Technology
• /
• v.54 no.1
• /
• pp.88-93
• /
• 2022

In this study, silkworms fed Cudrania tricuspidata leaves were powdered, and hydrolytic enzymes, including viscozyme, papain, and flavourzyme, were added to verify the functionality of the different mixtures. In the general component analysis, the C. tricuspidata silkworm (CS) group exhibited higher crude protein and ash content than did the other groups, and the enzyme-treated groups exhibited higher carbohydrate content than the CS group. The DPPH and ABTS radical scavenging activities were significantly higher in the CS treated with viscozyme (CSV) and the CS treated with viscozyme/flavourzyme (CSVF) than in the other groups, with the CSV group showing the highest reducing power. ACE inhibitory activity was significantly higher in the CS treated with visocozyme/papain (CSVP) than in the CS group. In conclusion, rather than using powdered silkworms fed C. tricuspidata leaves, it would be more effective to use hydrolysates from C. tricuspidata silkworms as raw materials for functional foods.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.36 no.3
• /
• pp.111-115
• /
• 2014

Purpose: This study evaluated powdered burn wound dressing materials from wild silkworm fibroin in an animal model. Methods: Fifteen rats were used in this experiment. Full-thickness $2{\times}2cm$ burn wounds were created on the back of rats under anesthesia. In the two experimental groups, the wounds were treated with two different dressing materials made from silkworm fibroin. In the Control Group, natural healing without any dressing material was set as control. The wound surface area was measured at five days, seven days and 14 days. Wound healing was evaluated by histologic analysis. Results: By gross observation, there were no infections or severe inflammations through 14 days post-injury. The differences among groups were statistically significant at seven days and 14 days, postoperatively (P<0.037 and 0.001, respectively). By post hoc test, the defect size was significantly smaller in experimental Group 1 compared with the Control Group and experimental Group 2 at seven days postoperatively (P=0.022 and 0.029, respectively). The difference between Group 1 and Group 2 was statistically significant at 14 days postoperatively (P<0.001). Group 1 and control also differed significantly (P=0.002). Group 1 showed a smaller residual scar than the Control Group and Group 2 at 14 days post-injury. Histologic analysis showed more re-epithelization in Groups 1 and 2 than in the Control Groups. Conclusion: Burn wound healing was accelerated with silk fibroin spun by wild silkworm Antheraea pernyi. There was no atypical inflammation with silk dressing materials. In conclusion, silk dressing materials can be used for treatment of burn wound.

• Korean Journal of Food Science and Technology
• /
• v.32 no.6
• /
• pp.1306-1312
• /
• 2000

This study was conducted to examine the effects of levels of flavoring materials on the sensory characteristics of chicken feet Jokpyun (Korean traditional gel type food) and to determine the optimum levels. Consumer desirability of Jokpyun flavored with different levels of black pepper and ginger was evaluated. Optimum levels of variables were obtained using response surface methodology. The levels were 0.33% and 0.1% for black pepper and ginger extract, respectively. The shelf-life of the optimized Jokpyun at $4^{\circ}C$ was determined as 6 days. Addition of powdered chicken broth in the Jokpyun preparation at the level of 1.5%(w/w) markedly increased boiled chicken flavor without resulting in undesirable properties.