• 한국표면공학회지
• /
• 제8권3호
• /
• pp.5-11
• /
• 1975

The boronizing method using ferroborn and NaBF4 powder mixture was studied for surface hardening of medium carbon steel. This boride layer was compared with a boride layer that was formed in ferroboron and KBF4 powder mixture. The frequency factor and activation energy were discussed in this paper. The main results obtained can be summerized as follow. 1) The optimum range of NaBF4 content is 10 to 15% of weight to obtain a thick and dense boride layer. 2) The depth of the boride layer was approximately expressed by the following equation : {{{{d=100 exp (-18,000/RT) SQRT { t} }} 3) The oxidating resistance of boronized steel proved to be good at 800$^{\circ}C$ but almost unacceptable near at 900 $^{\circ}C$. 4) The NaBF4 effect was the same as that reported for KBF4.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.549-554
• /
• 2002

In Powder System, SCC demands high dosage of superplasticizer and a lage amout of powder for suitable fluidity and viscosity. Okamura's method of most representative mixing design method in SCC of Powder-System is unfavorable economically because of using a large amount of powder. In addition, many ready-mixed concrete plants do not use his mix design method and procedure due to complexity for practical application. Therefore, Nan Su proposed more simple mix design method than Okamura's. It had an advantage in simplicity in practical application and required a smaller amount of powders compared with Okamura's method. This paper proposed an optimal mixture proportion of SCC with consideration of Nan Su's method. The new and modified mix design method required a smaller amount of powder than that of Nan Su's. To check the properties of SCC, considered with the requirements specified by the Japanese Society of Civil Engineering.(JSCE)

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.868-869
• /
• 2006

[ $Cr_2AlC$ ] was synthesized by a reactive hot pressing of $CrC_x(x=0.5)$ and Al powder mixture used as starting materials at the temperature range of $1200^{\circ}C{\sim}1400^{\circ}C$ under 25 MPa in Ar atmosphere. Fully dense $Cr_2AlC$ with high purity was synthesized by hot pressing $CrC_x$ and Al powder mixture at the temperature as low as $1200^{\circ}C$. The average grain size of synthesized bulk $Cr_2AlC$ was varied in the range of $10-100{\mu}m$ depending on hot pressing temperatures. The maximum flexural strength of synthesized bulk $Cr_2AlC$ exceeded 600 MPa.

• 한국분말재료학회지
• /
• 제8권1호
• /
• pp.35-41
• /
• 2001

$BaTiO_3$ fine powder was synthesized by hydrothermal process from the mixture of titania-hydroxide($TiO_2{\cdot}xH_2O$) and barium hexa-hydroxide ($Ba(OH)_2{\cdot}8H_2O$) as starting materials. Fine powder(< 100 nm) was made under the reaction conditions of 18$0^{\circ}C$,10 atm, 1.5 hr in autoclave and showed cubic structure. The powders were sintered by a spark plasma sintering technique from 1050~115$0^{\circ}C$ for 5 min. The grains of sample sintered at 110$0^{\circ}C$ were about 0.9${\mu}m$ in average size and showed the mixture of cubic and tetragonal structures.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2000년도 춘계학술강연 및 발표대회 강연 및 발표논문 초록집
• /
• pp.42-42
• /
• 2000

• 한국분말재료학회지
• /
• 제24권1호
• /
• pp.41-45
• /
• 2017

The effects of the heat treatment temperature and of the atmosphere on the dehydrogenation and hydrogen reduction of ball-milled $TiH_2-WO_3$ powder mixtures are investigated for the synthesis of Ti-W powders with controlled microstructure. Homogeneously mixed powders with refined $TiH_2$ particles are successfully prepared by ball milling for 24h. X-ray diffraction (XRD) analyses show that the powder mixture heat-treated in Ar atmosphere is composed of Ti, $Ti_2O$, and W phases, regardless of the heat treatment temperature. However, XRD results for the powder mixture, heat-treated at $600^{\circ}C$ in a hydrogen atmosphere, show $TiH_2$ and TiH peaks as well as reaction phase peaks of Ti oxides and W, while the powder mixture heat-treated at $900^{\circ}C$ exhibits only XRD peaks attributed to Ti oxides and W. The formation behavior of the reaction phases that are dependent on the heat treatment temperature and on the atmosphere is explained by thermodynamic considerations for the dehydrogenation reaction of $TiH_2$, the hydrogen reduction of $WO_3$ and the partial oxidation of dehydrogenated Ti.

• 한국분말재료학회지
• /
• 제21권3호
• /
• pp.215-221
• /
• 2014

Translucent alumina is a potential candidate for high temperature application as a replacement of the glass or polymer. Recently, due to the increasing demand of high power light emitting diode (LED), there is a growing interest in the translucent alumina. Since the translucent property is very sensitive to the internal defect, such as voids inside or abnormal grain growth of sintered alumina, it is important to fabricate the defect-free product through the fabrication process. Powder injection molding (PIM) has been commonly applied for the fabrication of complex shaped products. Among the many parameters of PIM, the flowability of powder/binder mixture becomes more significant especially for the shape of the cavity with thin thickness. Two different positions of the gate were applied during PIM using the disc type of die. The binder was removed by solvent extraction method and the brown compact was sintered at $1750^{\circ}C$ for 3 hours in a vacuum. The flowability was also simulated using moldflow (MPI 6.0) with two different types of gate. The effect of the flowability of powder/binder mixture on the microstructure of the sintered specimen was studied with the analysis of the simulation result.

• 한국식품조리과학회지
• /
• 제22권6호통권96호
• /
• pp.815-824
• /
• 2006

This study was performed to determine the optimum ratio of each ingredient in the steamed foam cake with barley (Hordeum vulgare L.) sproutling powder. The experiment was designed according to the D-optimal design of mixture design, which showed 14 experimental points including 4 replicates for three independent variables (sugar 112${\sim}$139%, barley sproutling powder 1${\sim}$8%, and oil 5${\sim}$25%). The compositional and functional properties of test were measured, and these values were applied to the mathematical models. A canonical form and trace plot showed the influence of each ingredient on the mixture final product. The results of F-test, volume, color values (L, a, b), textural properties (hardness, gumminess, chewiness) and sensory characteristics (softness) decided a linear model, while the sensory characteristics (color, smell, taste, overall acceptance) decided a quadratic model. The volume of steamed foam cake was increased by sugar addition, and a negative effect was exerted by barley sproutling powder and oil. L and a of color values increased but the b value decreased with increasing sugar and oil content, whereas barley sproutling powder tended to decrease all color values. The addition of barley sproutling powder also had a positive effect on the textural properties (hardness, gumminess, chewiness). Sensory characteristics (color, smell, softness, taste, overall acceptance) could suffer counter results with the excessive addition of sugar, barley sproutling powder, and oil. The optimum formulations by numerical and graphical methods were similar: sugar, barley sproutling powder, and oil were 130.4%, 4.0%, and 10.7% by numerical method, compared to 130.4%, 4.0%, and 10.7% by graphical method, respectively.

• Current Photovoltaic Research
• /
• 제2권3호
• /
• pp.115-119
• /
• 2014

$Cu(In,Ga)Se_2$ (CIGS) thin films have been used as a light absorbing layer in high-efficiency solar cells. In order to improve the quality of the CIGS thin film, often selenization step is applied. Especially when the thin film was formed by non-vacuum powder process, selenization can help to induce grain growth of powder and densification of the thin film. However, selenization is not trivial. It requires either the use of toxic gas, $H_2Se$, or expensive equipment which raises the overall manufacturing cost. Herein, we would like to deliver a new, simple method for selenization. In this method, instead of using a costly two-zone furnace, use of a regular tube furnace is required and selenium is supplied by a mixture of selenium and ceramic powder such as alumina. By adjusting the ratio of selenium vs. alumina powder, selenium vaporization can be carefully controlled. Under the optimized condition, steady supply of selenium vapor was possible which was evidently shown by large grain growth of CIGS within a thin powder layer.

• 한국분말재료학회지
• /
• 제20권2호
• /
• pp.100-106
• /
• 2013

Ultra-fine zirconium carbide (ZrC) powder with nano-sized primary particles was synthesized by the carbothermal reduction method by using nano-sized $ZrO_2$ and nano-sized graphite powders mixture. The synthesized ZrC powder was well dispersed after simple milling process. After heat-treatment at $1500^{\circ}C$ for 2 h under vacuum, ultra-fine ZrC powder agglomerates (average size, $4.2{\mu}m$) were facilely obtained with rounded particle shape and particle size of ~200 nm. Ultra-fine ZrC powder with an average particle size of 316 nm was obtained after ball milling process in a planetary mill for 30 minutes from the agglomerated ZrC powder.