• Economic and Environmental Geology
• /
• v.54 no.5
• /
• pp.605-613
• /
• 2021

When crushing rocks to produce aggregates, solid stone dust or sludge is generated as a by-product. These by-products are classified as waste and are not utilized, and most of them are disposed of landfills. This by-product differs in mineral composition, chemical composition, and physical properties depending on the rock type and aggregate production process. Therefore, if a technology that can make good use of the inherent physical or chemical properties of by-products is developed, economic and environmental benefits can be achieved instead of disposal. In this study, stone dust and sludge were collected from domestic aggregate producers and physical and chemical properties were investigated by performing XRD mineral analysis, particle size analysis, and chemical analysis. In addition, the research trend was identified through a domestic and international research case studies on the use of stone powder and sludge.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.107-114
• /
• 2017

A turbocharger is an engine supercharger that is driven by exhaust gas. It improves the output and fuel efficiency by increasing the charging efficiency of the mixture gas, which is achieved by changing the rotatory power of the turbine connected to the exhaust passage. It is important to control the supercharging for this purpose. A nozzle slide joint is one of the core parts. Austenitic stainless steel is currently used as the material for this part, and its excellent mechanical properties include high heat resistance and corrosion resistance. However, because of its poor machinability, there are many difficulties in producing products with complicated shapes. Machining is used in the production of nozzle slide joints for high dimensional accuracy after metal powder injection molding. As design variables in this study, we investigated the sintering temperature, product stress, deformation rate, radius of curvature of the punch, and angle of the chamfer punch, which are related to the strain and shapes. The goal is to suggest a forming process using Nitronic 60 that does not require machining to manufacture a nozzle slide joint for a turbocharger. Accordingly, we determined the best process environment using finite-element analysis, the signal-noise ratio, and the Taguchi method for experiment design. The relative density and hydrostatic pressure of the final product were in accordance with the results of the finite element analysis. Therefore, we conclude that the Taguchi method can be applied to the design process of metal powder injection molding.

• Journal of Aquaculture
• /
• v.11 no.4
• /
• pp.487-493
• /
• 1998

This study was conducted to investgate the effect of fish meal analogue (FMA) on the growth of Israeli carp, Cyprinus carpio averageing 43g. Leather meal, meat and bone meal, feather meal, squid liver powder, poultry by-product and blood meal were used for ingredient of FMA. Four experimantal diets were formulated to contain 36% crude protein and 15.4 kJ available enery g-1. The percentage of follows ; Diet 1, 100% 3, 60% WFM + 40% FMA (40% FMA) ; Diet 4, 40% WFM + 60% FMA (60% FMA). In this expriment, fingerling Israeli carp averaging 43 g were assigned to each diet treatment. When the experiment was terminated, weigth gain (WG), feed conversion (FC), specific growth rate (SGR) and protein efficiency ratio (PER) were measured respectively. In the experiment, WG, FC, SGR and PER of Diet 2 were not significantly different from those of the control diet (P0.05). And WG, FC and SGR of Diet 3 were not significantly of the control Diet. In Diet 4, WG, FC and PER were not significantly different from those of the control Diet, but SGR was lower than that fo the control Diet. According to the results from this study, it might be possible to replace fish meal protein by FMA up to 60% in fingerling Israeli carp diets.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.29 no.1
• /
• pp.47-57
• /
• 2021

This study was conducted to evaluate the properties of mixtures of mixed organic fertilizer (MOF) and various organic sources such as livestock manure compost (LMC), dried compost of poultry manure (CPM), dried food waste powder (FWP) and amino acid by-product fertilizer (ABF) and their influences on growth of lettuce and Chinese cabbage. The content of N, P2O5 and K2O of mixture of MOF, LMC and FWP (MLF) was 3.6~3.9%, 2.1~2.2% and 1.3~1.4%, respectively. Lettuce dry weight of MLF3 treatment blending with MOF (60%), LMC (10%) and FWP (30%) was increased by about 29% than that of MOF. The content of N, P2O5 and K2O of mixture of MOF, CPM, FWP and ABF (MCFA) was 4.5~4.7%, 1.7~1.9% and 1.3~1.4%, respectively. Compared to MOF, growth factors of lettuce and Chinese cabbage in the MCFA treatments were not significantly deferent. These results indicated that MLFs and MCFAs, the mixtures of respectively organic sources and MOF, could be applied as orgnic fertilizer in the cultivation of lettuce and Chinese cabbage, and were expected that LMC and ABF might be used as another sources of organic fertilizer.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.4
• /
• pp.627-631
• /
• 1996

The antioxidative effects of BHT and rosemary on the hydrolysate from skipjack processing byproduct(SPB) was evaluated by storing at $30^{\circ}C$ for 60 days. Each of 0.02% BHT, 0.01% rosemary, and 0.02% rosemary was added into SPB hydrolysate prior to spray drying and the dried powder was tightly sealed in the laminated film(PET/Al foil/CPP, $5\mu\textrm{m}/15\mu\textrm{m}/70\mu\textrm{m})$ bags for storage. The colometric lightness("L") decreased through the storage period in all treatments while the redness ("a") showed the opposite trend. Changes of pigment were higher in level of hydrophillic brown than in lipophilic brown during storage. The effect of antioxidants, by adding BHT and rosemary, showed in TBA and POV during storage. Especially, the 0.02% rosemary treatment was more effective than 0.02% BHT treated SPB having effect of angiotensin converting enzyme(ACE) inhibiting.yme(ACE) inhibiting.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.1 no.1
• /
• pp.58-66
• /
• 2013

This study investigated quality properties of alkali activated cement free mortar using industrial by-product such as cement kiln dust(CKD), silica fume(SF) and quartz sand powder(SP) to compare with previous research about blast furnace slag(BS) and fly ash(FA). The results were as following. All materials were effective to increase compressive strength, however they showed different tendency on flowability. CKD and SP increased flowability, but on the other hand SF did not because it's blain was great difference with other materials. Flowability and compressive strength were related with grading distributions of binders because CKD, SP and SF which had small particle size filled up BS and FA. Application of industrial by-products with various grading distributions could be effective for the high early strength and flowability of alkali activated cement free mortar using BS.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.6
• /
• pp.85-91
• /
• 2020

The necessity for ground reinforcement of structures has been increasing in South Korea because buildings have encountered constructional problems such as inclined structures and collapses caused by earthquakes or differential settlement of the foundations. With regard to a ground reinforcement method, an increasing number of high-strength concrete piles have been used based on their advantages, including a wide range of penetration depth and a high load-bearing capacity. However, problems such as the destruction of a pile head during on-site placement work can occur when the pile has insufficient strength. For this reason, the strength of such piles should be managed more thoroughly. Thus, this study analyzed the strength properties of high-strength concrete piles using blast furnace slag (BFS) powder as a cement replacement, which was generated as an industrial byproduct. The analysis results indicated that the compression strength of the concrete piles increased when 10% to 20% of the cement was replaced with ground granulated blast-furnace slag (GGBS). In addition, the compression strength of the concrete piles was calculated to be 80.6 MPa when 20% of the cement was replaced with GGBS, which was greater by 5% than that of an ordinary Portland cement (OPC) specimen.

• Journal of Advanced Technology Convergence
• /
• v.2 no.4
• /
• pp.1-6
• /
• 2023

Research on power inductor surface UV printing equipment using cylindrical magnets can prevent damage to quality consumable materials (making plates, Squeegees) during printing and improve printing quality by applying technology to prevent product from flipping or standing up when fixing the product by making the magnetic formation of cylindrical magnets form up and down. The development of cylindrical magnets that changed the direction of magnetic force will stabilize the fixing method for metal products made by powder compression, increasing the production capacity for small products. Finally, by studying the power inductor surface UV printing device using cylindrical magnets, it can be differentiated from the spray and deeping methods that were being worked on, production will be greatly improved, and as a result, cost reduction and competitive production will be possible.

• Journal of the Korean Magnetics Society
• /
• v.11 no.6
• /
• pp.250-255
• /
• 2001

Magnetic properties of the isotropic and anisotropic NdFeB magnets obtained by the Current-Applied Pressure-Assisted (CAPA) process from a melt-spun NdFeB powder were investigated using B-H loop analyser. The coercivity of the isotropic magnets is sensitive to the applied pressure in the CA-pressing and increases with increasing the pressure. The remanence of the anisotropic magnet increases with increasing the degree of deformation, and it results in the increase of a maximum energy Product. The best magnetic Properies of the isotropic and anistropic magnet are B$\sub$r/= 8.7 kG, $\sub$i/H$\sub$c/= 16.9 kOe, (BH)$\sub$max/= 16.5 and B$\sub$r/= 13.6 kG, $\sub$i/H$\sub$c/= 10.9 kOe, (BH)$\sub$max/= 44.2 MGOe, respectively.

• Food Science of Animal Resources
• /
• v.29 no.5
• /
• pp.647-652
• /
• 2009

A duplex PCR technique was applied for specific identification of cow and goat milk in milk products by using primers targeting the mitochondrial 12S rRNA gene. Duplex PCR using primers specific for cow and goat generated specific fragments of 223bp and 326bp from cow and goat milk DNA, respectively. Duplex PCR was applied to 15 milk products purchased from the market to verify label statements. The labeling statements of four market milk products, three yoghurt products, and one whole milk powder product were confirmed in the duplex PCR. The labeling statements of five of seven infant milk powder products were also confirmed by duplex PCR but the other two products were shown to be contaminated with either cow or goat milk. The proposed duplex PCR provides a rapid and sensitive approach to detection of as little as 0.1% cow milk in goat milk and one-step detection of cow or goat milk in milk products.