• Korean Journal of Materials Research
• /
• v.10 no.9
• /
• pp.619-623
• /
• 2000

Alumina membrane was prepared by sol-gel coating method using boehmite powder(${\Upsilon}-AlOOH$). The supported and the unsupported alumina membrane were fabricated to investigate the phase transformation and change of microstructure. It is important to control the homogeneous pore size and distribution in application of filtering process. The ${\theta}-to\;{\alpha}-AL_2O_3$ phase transformation (XRD) and the change of microstructure was investigated using scanning electron microscopy(SEM). XRD patterns showed that the supported membrane had $100^{\circ}C$ higher ${\theta}-to\;{\alpha}-AL_2O_3$ transformation temperature compared to the unsupported membrane. The similar effect was also observed for microstructural change of the membrane.

• Journal of Dairy Science and Biotechnology
• /
• v.37 no.4
• /
• pp.213-222
• /
• 2019

Milk and dairy products are the high value foods for the elderly population. In particular, fermented milk is the best source of calcium for people in the specific age group of over 79 years. It provides a good source of protein. Regular exercise and active lifestyle are recommended to slow down the muscle loss. However, exercising without proper nutrient intake is simply not sufficient at this age. Milk and dairy products provide the iron and protein content required for effective exercise-assisted growth. Milk nutrients have the advantage of being produced in various food forms, such as liquid, semi-solid, and powder types. Fat-soluble vitamins such as retinol and vitamin K can be encapsulated using various technologies for milk and dairy products. Using the encapsulation method, spray drying and fluidized-bed coating have been used for adding the micro-nutrients to the food. Microencapsulation technology is being applied in case of the fermented dairy products too. In particular, various wall materials are being developed to enhance the viability of probiotics. In the near future, advanced high-efficiency technologies that can effectively nourish the dairy products with nutrients will be developed to produce targeted high-nutrition value food for the elderly.

• Environmental Engineering Research
• /
• v.21 no.3
• /
• pp.291-296
• /
• 2016

Application of photocatalytic nanoparticles has been recently gaining an increased attention as air purifying material for sustainable urban development. The present work reports the photocatalytic removal of gaseous phase nitrogen oxides ($NO_x$) using $TiO_2$-coated zeolite to be applied as a filter media for the urban green infrastructure such as raingardens. The $TiO_2$-coated zeolite was synthesized by simple wet chemistry method and tested in a continuous-flow photo-reactor for its removal efficiency of $NO_x$ under different conditions of the weight percentage of $TiO_2$ coated on the zeolite, and gas retention time. The removal efficiency of $NO_x$ in general increased as the weight percentage of $TiO_2$ coated on the zeolite increased up to 15-20%. Greater than 90% of $NO_x$ was removed at a retention time of one minute using the $TiO_2$-coated zeolite ($TiO_2$ weight percentage = 20%). Overall, $TiO_2$-coated zeolite showed greater efficiency of $NO_x$ removal compared to $TiO_2$ powder probably by providing additional reaction sites from the porous structure of zeolite. It was presumed that the degradation of $NO_x$ is attributed to both the physical adsorption and photocatalytic oxidation that could simultaneously occur at the catalyst surface.

• Journal of Korean Medical classics
• /
• v.23 no.6
• /
• pp.97-108
• /
• 2010

Salt is a vital inorganic substance to human body and is seasoning in food. It is an absolute alternating factor on fermented food. What's more, in the oriental medicine, it is widely used to raise the pharmacological effect as a component of a prescription when processing a medicine, and when taking the medicine. Though, Importance of salt is often unaware and it is not used in the right way. focusing on "東醫寶鑑 內景篇 Donguibogam-Naegyeong" I categorized the methods of salt's prescription, dose, processing, seasoning, etc. The contents were compared and studied as well. When salt is used as a medicine, It is used as a main medicine, complimentary(aid) medicine, Jjim-Jil(hot towel or bath etc), vomiting medicine and gargling water. when taking the salt water with other medicine, depending on the type of the medicine, boiled salt water, warm alcohol or salt water, mixing powder medicine with salt water etc The methods are diverse. The reason to process medicine with salt or salt water is to bring the pharmacological Qi(energy) down to increase remedial value. When processing a medicine, kneading dough with salt water and the case using food ingredient as medicine salt was used as seasoning. Kneaded mud with salt were used to cover medicine or on the outer surface. This proves that it prevents the dryness and helps the medicine cooked even. Like this, salt is vital and highly-valued medicine in the oriental medicine. learning the right method of using salt and if it were used properly It is considered that it would increase the Pharmacological effect.

• Korean Journal of Soil Science and Fertilizer
• /
• v.12 no.3
• /
• pp.133-139
• /
• 1979

In order to evaluate the effect of developed Nk compound fertilizers, 17-0-17 granular and powder, and 17-0-14 granules in comparison with single fertilizers, urea and potassium on rice (Oryzae sativa) ; cultivar, Milyang 23, (Orizae Sativa), a field experiment was carried out. Results obtained are as follows : 1. The top dressing of NK compound fertilizers tended to produce higher paddy yield than that of single fertilizers; urea and patasstum muriate. 2. The absorption of potassium and nitrogen by rice plant from the plot of NK granular compound fertilizer, 17-0-17, was greater than from the plots the absorption of those elements received other types of ferilizers and application method The absorded K/Ca+Mg ratio in milli equivalent basis in plant was also appeared to be in same order as the absorption of nitrogen and potassium. 3. From the results of present study it seemed necessary to evaluate the NK compound fertilizer for the top dressing at effective tillering stage of rice as well.

• Journal of the Korean Magnetics Society
• /
• v.26 no.5
• /
• pp.159-167
• /
• 2016

We have examined the perceptions of 6th grade elementary school students' conceptions on the magnetic fields of a permanent magnet by cognitive style. Students' conceptions on the magnetic fields of permanent magnet after the iron powder experiment are grouped into four models; Partial Distribution Model (PDM), Pole Separation Model (PSM), Homogeneous Distribution Model (HDM), and Field Model (FM). After the experiment to observe the magnetic field of the permanent magnet with compass, the students' conceptions are grouped into three models; Pole Separation Model (PSM), Complex Homogeneous Distribution Model (CHDM), and Field Model (FM). And after the application of the alternative experimental method to observe the magnetic field with only one compass, students' conceptions on magnetic field has been enhanced in both field-dependent and general-cognitive groups of students.

• Journal of the Korean Ceramic Society
• /
• v.47 no.2
• /
• pp.122-126
• /
• 2010

In this article photoluminescence of the $Al_2O_3:xCr_2O_3$ solid solutions prepared by solid state reaction method are represented. The effect of $Cr_2O_3$-activator concentration and heat treatment time on the PL characteristics have been discussed in conjunction with microstructure of phosphor samples. The $Al_2O_3:xCr_2O_3$ phosphors show the highest PL intensity at x=0.003 mole when the samples are reacted at $1600^{\circ}C$ for 5 h. The PL emission and absorption spectra show the maximum peaks at 698 nm and at 398 nm respectively. The CIE color coordinate is (x=0.646, y=0.316) at 0.003 mole $Cr_2O_3$, which value is very close to the NTSC coordinate of red color. This characteristic feature of $Al_2O_3:xCr_2O_3$ has been applied for an additive to improve the color characteristic of other red phosphor $LiEuW_2O_8$ which has a relatively poor color purity with an emission peak centered at 615 nm and with a CIE coordinate (x=0.530, y=0.280). The $Al_2O_3:0.003Cr_2O_3$ phosphor has been mixed with the $LiEuW_2O_8$ phosphor powder and the PL characteristics and CIE color coordinates are characterized. The $Al_2O_3:xCr_2O_3$ phosphor was found effective for improving the CRI (color rendering index) of $LiEuW_2O_8$ phosphor.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.4
• /
• pp.389-394
• /
• 2017

The aim of the research is providing the application method of recycled materials to manufacture the low costed eco-friend block at currently operated concrete block plant. In this research, based on the previous research results on three types of slag cement with illite, desulfurized gypsum, and wasted refractory products, the actual block product was manufactured by the currently operated plant facility and evaluated their properties to suggest the optimal proportions. As an experimental results, in aspect of compressive strength, absorption ratio, freezing resistance, and pH, type III slag incorporating 5% desulfurized gypsum with 1% replaced illite as an aggregate could be suggested as am optimal proportion. In additionally, considering the high cost of the illite, it can be considered as an optimal proportion that type III slag incorporating 5% desulfurized gypsum for binder.

• Journal of the Korean Society of Costume
• /
• v.60 no.2
• /
• pp.68-80
• /
• 2010

In order to get the information needed for the preservation and application of Korean traditional dyeing techniques to modern textiles products, the present study analyzed the color and color differences of dyed goods according to the contents of fabrics and the traditional techniques of dyeing the Buddhist priests' robes. A spectrophotometer was used to measure the differences in achromatic color according to dyeing techniques, dyestuff, kinds of dyed fabrics, and after-treatment methods. Through experiments based on the traditional dyeing techniques used by Korean Buddhist priests, a total of 144 pieces of dyed fabrics were made and all the colors of those 144 pieces were analyzed. Among three dyeing techniques tested; (1) dyeing with a dye-bath made of ink stick that was ground down with water, (2) dyeing with a dye-bath made by shaking a bag containing ink powder in water, and (3) dyeing with a dye-bath made by rubbing a boiled ink stick on a fabric, dyeing with a dye-bath made of ink stick that was ground down with water was shown to be the best technique in terms of coloring. For fabrics, ramie was the best of all three techniques in terms of making achromatic color. Starching and rubbing was the most effective after-treatment method used on both fabrics dyed with a grounded ink stick and on fabrics dyed by rubbing a boiled ink stick on them. As a whole, yangyeonmook, made from minerals' soot, is better than songyeonmook, which is made by burning old pine trees or yooyeonmook, which is made by burning oils from seeds. Therefore, yangyeonmook could help to preserve and utilize the traditional dyeing techniques of Korea in a practical way in modern life.

• Journal of Korea Foundry Society
• /
• v.2 no.3
• /
• pp.2-15
• /
• 1982

In this study, the influenced of graphite shape on the boriding of cast iron and boride structure was investigated. Gray cast iron, ferritic and pearlitic ductile cast iron were borided at 750,850,900 and $950^{\circ}C$ for 1,3 and 5 hours by powder pack method with the mixture of $B_4C_9\;Na_2B_4O_7$, $KBF_4$ and Shc. The boride layer was consisted of FeB(little), $Fe_2B$ (main) and graphite. Some possibility of the existence of unknown Fe-B-C compound in the boride layer was suggested. And precipitates in the diffusion zone was $Fe_3(B,C)$. The concentration of Si and precipitation of $Fe_3(B,C)$ in the ${\alpha}$ layer raised the hardness of this Zone. The depth and hardness of boride layer increased with the increase of treating temperature and tim. But high temperature (over $950^{\circ}C)$ caused pore at graphite position and long treating time (5hrs) sometimes caused formation of graphite layer beneath the boride layer. So, for the practical application of borided cast iron, treating in short time and at low temperature was recommended. And for ductile cast iron, ferritizing or pearlitizing heat treatment was seemmed to be possible at the same time with boriding. The graphite in the boride layer was deeply concerned with the qualitx and characteristics of the boride layer. And it greatly influenced on the shape of the boride phase, structure of the boride layer. Generally speaking, the existance of graphite restrained the growth of the boride phase. But the boundary between the gsaphite and the matrix acted as the shortcut of boron diffusion. So, for gray cast iron, the graphite layed length-wise led the formation of boride layer.