• 전기학회논문지
• /
• 제63권7호
• /
• pp.962-967
• /
• 2014

In this paper, through a digital potentiometer and exponentially weighted moving average filter, pulse and PPG waveform measurable device was fabricated in radial artery. If this device is not proper about signal size in analog part, MCU can judge easily by adjusted amplification through digital potentiometer, using exponentially weighted moving average filter is able to filter out more clear value of ADC. I presumed pulse rate as value of measuring time between point of maximum contraction from sensing signal in radial artery of wrist. Therefore, this means can measure stable pulse rate and PPG waveform, finger as well as radial artery, whether signal size of each person is different finger as well as radial artery.

• 한국전자파학회논문지
• /
• 제13권6호
• /
• pp.599-604
• /
• 2002

본 논문에서는 편광기를 부착한 차동검출기의 부하저항으로 디지털가변저항을 사용하여 잡음소거 능력을 개선하였다. 이 구조에서는 차동검출기를 구성하는 2개의 포토다이오드에서 검출된 잡음전압의 크기가 항상 동일한 값이 되도록 디지털 가변저항의 크기를 제어하여 잡음광을 소거한다. 이 방식에서는 고정된 부하저항을 사용한 구조에 비하여 신호대잡음비가 약 23 dB 더 향상되었다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.372-375
• /
• 2006

The MSC is a high resolution multi-spectral camera system which is mounted on the KOMPSAT-II satellite. The electro-optic camera system has a refocusing mechanism which can be used in-orbit by ground commands. By adjusting locations of some elements in optics, the system can be focused precisely. The focus mechanism in MSC is implemented with stepper motor and potentiometer. By reading the value of the potentiometer, rough position of the motor can be understood. The exact location of the motor can not be acquired because the information from the potentiometer can not be so accurate. However, before and after certain events of the satellite, like a satellite launch, the direction of the movement or order of the magnitude of the movement can be understood. In this paper, the trend analysis of the focus motor position during the ground test phase is introduced. This result can be used as basic information for the focus calibration after launch. By studying the long term trend, deviation from the best focal point can be understood. The positions of the focus motors after launch are also compared.

• Journal of Biosystems Engineering
• /
• 제23권2호
• /
• pp.179-186
• /
• 1998

This study was conducted to sense posture of an autonomous tractor using a DGPS, a gyro compass, and a potentiometer. Posture sensing system was constructed and its accuracy was evaluated. The accuracy of DGPS was evaluated under stationary and moving conditions, and the performance of the gyro compass and the potentiometer was investigated by measuring bearing and steering angles, respectively. Also, the effect of DGPS interference by obstacles was evaluated experimentally. The position accuracy was about 6.6cm(95%) under the stationary condition and 10 cm at sharp turning condition. Steering angle of the tractor could be related linearly to the output of the potentiometer that was installed on the rotating center of a knuckle arm. The positioning accuracy of the DGPS varied significantly according to the number of visible GPS satellites, but was good with more than 7 satellites. The DGPS gave bad solutions for sensing the posture of tractor when signals from satellites or the correction data from the base were interfered by obstacles.

• 한국정보통신학회논문지
• /
• 제16권4호
• /
• pp.872-878
• /
• 2012

본 논문은 사람 팔의 움직임 감지 시스템을 제안한다. 기존의 모션측정 장비들은 고가이거나 혹은 특수한 장소가 따로 필요하였다. 또한 측정한 데이터들을 필요한 데이터로 변환하는 추가적인 시간도 필요하였다. 본 논문에서는 사람이 입을 수 있으며 가격이 매우 저렴하고 추가적인 데이터 변환이 필요 없는 시스템을 개발 하였다.

• Journal of Biosystems Engineering
• /
• 제11권1호
• /
• pp.17-23
• /
• 1986

Speed control of kerosene engine by the combination of a manual throttle and centrifugal weight type governor is not adequate for evaluating energy requirements in laboratory and field performance tests. This paper describes an engine speed control system. This system consists of Apple-II microcomputer, step motor set to the throttle shaft directly, step motor driving and interfacing circuit, engine performance data acquisition system for measuring load, speed and time and potentiometer as speed adjustor. The performance of this system was successful in maintaining engine speed within ${\pm}37$ rpm of reference speed indicated by computer and potentiometer.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.276-279
• /
• 2001

차량용 에어컨시스템은 그림2.1과 같이 온도제어를 위하여 각Door의 위치를 제어하고 있는데 현재 적용중인 위치제어 방법은 주로 접점식Encoder 및 전위차계(Potentiometer)를 사용하여 구현하고 있다. 이는 접점식Encoder 및 전위차계를 사용하여 Position Sensing을 하는 Servo 위치제어 System이나 접점식Encoder의 분해능이 낮아 임의위치 제어가 곤란하고, 전위차계의 저항 비선형 특성에 의하여 출력에 영향을 주게되므로 정밀위치제어가 어렵다. 또한, 에어컨시스템 제어를 위해 D.I.O(Direct In Out)제어방법을 적용하고 있어 시스템전체가 복잡하게 구성되는 문제점이 있다. 따라서 본 논문에서는 그림2.2와같이 자기저항(M.R센서)Type 엔코더를 사용하여 D.C Motor Actuator를 임의위치제어가 가능하게 하였고, 직렬통신(Serial Communication)방식을 사용하여 복잡한 시스템을 컴펙트하게 설계하여 차량용 에어컨에서 기존의 제어방법에 비하여 온도제어성 및 각토출구간 온도편차를 향상시켰다.

• 전기학회논문지
• /
• 제57권2호
• /
• pp.229-234
• /
• 2008

An AC-DC transfer standard(TS) is used for the AC voltage standard in the range of 2 mV to 1000 V below 1 MHz. Micro-potentiometer(${\mu}Pot$) is used to evaluate the ac-dc transfer difference(ADD) of the TS below 200 mV range. The ADD of the TS were changed by the loading effect caused from the input impedance change of the TS depend on frequency. An input impedance evaluation technique of the TS using ${\mu}Pot$ has been developed.

• 한국전자파학회논문지
• /
• 제13권6호
• /
• pp.560-565
• /
• 2002

본 논문에서는 무선광연결에서 사용하는 광검출기의 위치가 신호광의 중심으로부터 이탈되어 발생할 수 있는 검출전압의 변동을 디지털가변저항을 이용하여 안정화한다. 검출전압의 안정화가 가능한 최대이탈거리를 계산하고, 검출전압의 안정화 동작을 실험적으로 확인하였다 이 안정화 방법은 신호광 출력이나 빔 진행방향의 미소한 변화 또는 광검출기의 위치변동으로 인한 검출전압의 불안정을 해소하는 데에 매우 유용하게 이용할 수 있다.

• 항공우주시스템공학회지
• /
• 제3권3호
• /
• pp.13-16
• /
• 2009

Aircraft flight control surfaces which are one of the most important elements of safety allow a pilot to adjust and control the aircraft's flight attitude. This paper is described of the control surface deflection angle measuring device. Data analysis through ground test and flight test can provide reliability of this device using the present system. It is also shown that measuring system is capable of detecting failure of control surfaces.