• Corrosion Science and Technology
• /
• 제16권3호
• /
• pp.100-108
• /
• 2017

In this investigation corrosion behavior of newly developed high-pressure die cast Al-Ni (N15) and Al-Ni-Ca (NX1503) alloys was studied in 3.5% NaCl solution. The electrochemical corrosion behavior was evaluated using open circuit potential (OCP) measurement, potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS) techniques. Potentiodynamic polarization results validated that NX1503 alloy exhibited lower corrosion current density ($i_{corr}$) value ($5.969{\mu}A/cm^2$) compared to N15 ($7.387{\mu}A/cm^2$). EIS-Bode plots revealed a higher impedance (${\mid}Z{\mid}$) value and maximum phase angle value for NX1503 than N15 alloy. Equivalent circuit curve fitting analysis revealed that surface layer ($R_1$) and charge transfer resistance ($R_{ct}$) values of NX1503 alloy was higher compared to N15 alloy. Immersion corrosion studies were also conducted for alloys using fishing line specimen arrangement to simultaneously measure corrosion rates from weight loss ($P_W$) and hydrogen volume ($P_H$) after 72 hours and NX1503 alloy had lower corrosion rate compared to N15 alloy. The addition of Ca to N15 alloy significantly reduced the Al3Ni intermetallic phase and further grain refinement may be attributed for reduction in the corrosion rate.

• 대한화학회지
• /
• 제55권3호
• /
• pp.495-501
• /
• 2011

플라보노이드계 화합물인 HMPC (3-hydroxy-7-methoxy-2-phenylchromen-4-one의 부식억제성질, HMPC와 TBAB(n-tetrabutylammonium bromide) 간 상승효과, 염산 조건하 부드러운 강철의 흡착성질을 무게 감량, 변전위 편극, 전기화학 임피던스 분광기를 사용하여 연구하였다. 다양한 온도에서 무게 감량 측정 실험한 결과 부식 억제 효율은 억제제 농도가 증가함에 따라 증가하였고, 계의 온도가 증가함에 따라 감소하였다. 전기화학 실험 결과 부식 억제는 여러 혼합된 형태의 억제 방법에 의해 가능하였다. 금속 표면에 흡착된 억제 화합물 분자는 보호막을 형성하였다.

• 대한화학회지
• /
• 제58권2호
• /
• pp.160-168
• /
• 2014

The electrochemical behavior and corrosion inhibition of zinc in 0.5 M $H_2SO_4$ in the absence and presence of some chromones has been investigated using weight loss, potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) and electrochemical frequency modulation (EFM) techniques. The presence of these investigated compounds in the corrosive solutions decrease the weight loss, the corrosion current density, and double layer capacitance but increases the charge transfer resistance. Polarization studies were carried out at room temperature, and showed that all the studied compounds act as mixed type inhibitors with a slight predominance of cathodic character. The effect of temperature on corrosion inhibition has been studied and the thermodynamic activation and adsorption parameters were determined and discussed. The adsorption of the investigated compounds on zinc was found to obey Langmuir adsorption isotherm.

• Corrosion Science and Technology
• /
• 제5권2호
• /
• pp.62-68
• /
• 2006

Solvent free high solid coatings are increasingly used as they posses number of advantages such as, lower cost per unit film thickness, better performance and eco-friendliness. In the present study polymeric film-forming materials such as aniline-novolac (ANS), cresol-novolac (CNS) and acrylic copolymer blended cresol-novolac (ACNS) coating materials have been prepared. The corrosion resistance properties of the prepared high solid coating materials have been evaluated through potential-time, potentiodynamic polarization and electrochemical impedance studies (EIS). Among the three coating systems, cresol-novolac polymer coated substrates offer better corrosion resistance property and the order of the performance was found as CNS > ACNS > ANS. We can recommend these systems for use in automobile applications.

• 대한화학회지
• /
• 제58권1호
• /
• pp.85-91
• /
• 2014

The corrosion behavior of aluminum and mild steel in hydrochloric acid medium was studied using a nicotinic acid hydrazide as inhibitor by potentiodynamic polarization, electrochemical impedance spectroscopy technique and gravimetric methods. The effects of inhibitor concentration and temperature were investigated. The experimental results suggested, nicotinic acid hydrazide is a good corrosion inhibitor for both aluminum and mild steel in hydrochloric acid medium and the inhibition efficiency increased with increase in the inhibitor concentration. The polarization studies revealed that nicotinic acid hydrazide exhibits mixed type of inhibition. The inhibition was assumed to occur via adsorption of the inhibitor molecules on the aluminum and mild steel surface and inhibits corrosion by blocking the reaction sites on the surface of aluminum.

• 대한화학회지
• /
• 제55권3호
• /
• pp.364-372
• /
• 2011

다양한 억제제의 농도, 온도, 유속에서 중량 분석과 변전위 분극법을 이용하여 0.25 M 황산 용액상에 있는 연강철에 대한 imatinib mesylate (IMT)의 부식 억제를 연구하였다. 억제제의 농도가 증가함에 따라 억제 효과가 증가한다는 결과를 얻었다. 연강철 표면 위의 흡착 과정은 Langmuir 흡착 등온선을 따른다. 얻어진 흡착 깁스 자유 에너지의 값은 연강철 위의 IMT의 흡착 과정이 화학흡착이라는 것을 보여준다. 열역학 변수들이 계산되고, 논의되었다. IMT의 HOMO와 LUMO의 전자궤도 밀도 분포는 억제 메커니즘을 논의하는데 이용되었다. FT-IR 분광학과 SEM 이미지는 필름에 흡착된 표면을 분석하기 위해 사용되었다.

• Journal of Electrochemical Science and Technology
• /
• 제7권2호
• /
• pp.153-160
• /
• 2016

The inhibition ability of N,N-bis(2,4-dihydroxyhydroxybenzaldehyde)-1,3-Propandiimine (DHBP) as a schiff base against the corrosion of API-5L-X65 steel in 1 M HCl solution was evaluated by electrochemical impedance spectroscopy, potentiodynamic polarization and scanning electron microscopy. Electrochemical impedance studies indicated that DHBP inhibited corrosion by blocking the active corrosion sites. The inhibition efficiency increased with increasing inhibitor concentrations. EIS data was analysed to equivalent circuit model and showed that the charge transfer resistance of steel increased with increasing inhibitor concentration whilst the double layer capacitance decreased. The adsorption of this compound obeyed the Langmuir adsorption isotherm. Gibbs free energy of adsorption was calculated and indicated that adsorption occurred through physical and spontaneous process. The corrosion inhibition mechanism was studied by potential of zero charge. Polarization studies indicated that DHBP retards both the cathodic and anodic reactions through adsorption on steel surface. Scanning electron microscopy was used to study the steel surface with and without inhibitor.

• Corrosion Science and Technology
• /
• 제8권2호
• /
• pp.45-52
• /
• 2009

The corrosive behavior of mild steel in 0.05 M to 10 M $H_2SO_4$ solutions containing different concentrations of tetrahydropyrimidine derivatives (THPM) was investigated using weight loss method, gasometric technique, electrochemical studies which include AC - impedance and potentiodynamic polarization method, atomic absorption studies and synergistic effect. The results obtained reveal that THPM derivatives is an efficient mixed type inhibitor but slightly anodic and it is more effective in reducing corrosion of mild steel in $H_2SO_4$ media. The adsorption of the inhibitor on the mild steel surface obeys the Langmuir adsorption isotherm. The thermodynamic parameters of adsorption reveal a strong interaction and spontaneous adsorption of THPM on the mild steel surface. The influence of temperature and inhibitor concentration on the corrosion of mild steel has also been investigated.

• Nuclear Engineering and Technology
• /
• 제55권11호
• /
• pp.4032-4038
• /
• 2023

Cu, which exhibits excellent corrosion resistance in underground environments, has been investigated as a canister material for use in the deep geological disposal of spent nuclear fuels. In this study, the technical viability of atmospheric plasma spraying for producing Cu-coated canisters was investigated. A high-purity Cu film (millimeter scale) was deposited onto a stainless-steel substrate using a plasma gun with a shroud structure. Potentiodynamic polarization studies revealed that the Cu film exhibited a sufficiently low corrosion rate in the groundwater electrolyte. In addition, no pitting corrosion was observed on the Cu film surface after accelerated corrosion studies. A prototype cylindrical Cu film was fabricated on a 1/20 scale on a stainless-steel tube to demonstrate the scalability of atmospheric plasma spraying in producing Cu-coated canisters.

• Corrosion Science and Technology
• /
• 제19권5호
• /
• pp.259-264
• /
• 2020

Many studies have been conducted to improve the corrosion resistance and durability of various aluminum alloys through the anodizing technique. It is already used as a unique technique for enhancing the properties of aluminum alloys in various industries. This paper investigated the electrochemical corrosion and stress corrosion cracking characteristics of anodized aluminum 5083-H321 alloy in natural seawater. The corrosion characteristics were assessed by the electrochemical technique and potentiodynamic polarization test. The stress corrosion cracking characteristic was evaluated with a slow strain rate tensile test under 0.005 mm/min rate, which showed that the hard anodizing film had a thickness of about 16.8 ㎛. Although no significant characteristics of stress corrosion cracking were observed in the slow strain rate test, the anodized specimen presented excellent corrosion resistance. The corrosion current density was measured to be approximately 4.2 times lower than that of the base material, and no surface damage was observed in the anodic polarization test.