• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.12
• /
• pp.2135-2144
• /
• 2007

This paper presents system design of the slotless double-side Permanent Magnet Linear Synchronous Machine system (PMLSM) through magnetic field analysis and dynamic modeling. In our analysis, 2-D analytical treatments based on the magnetic vector potential were adopted to predict magnetic field with space harmonics by PM mover magnetization and stator winding current. From these, the design parameters such as inductance, Back-emf, and thrust are estimated. And, the electrical dynamic modeling including synchronous speed is completed by calculation of a DC link voltage in effort to obtain the accurate mechanical power from Space Vector Pulse Width Modulation(SVPWM). Therefore, the system design of PMLSM is performed from estimation of design parameters according to PM size and coil turns in magnetic field and from calculation of a DC link voltage to satisfy base speed and base thrust represented as the maximum output power in dynamic modeling. The estimated values from the analysis are verified by the finite element method and experimental results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10B
• /
• pp.1815-1823
• /
• 1999

This study investigates the problem of potential bottleneck on FTTC access networks. The link capacity for multiplexed stream using the 2-state MMPP source model is estimate on the assumption of a single VC per user. An analytic from between the cell loss rate and the effective bandwidth has been used to estimate an appropriate ling bandwidth varying the fraction of active users.

• ETRI Journal
• /
• v.19 no.3
• /
• pp.116-140
• /
• 1997

The base station transceiver subsystem (BTS) of the CDMA Mobile System is interfaced to mobile stations over the air and to the wired network through a packet switched interconnection network. The potential benefits of CDMA technology are achieved when the transmitter and the receiver are properly designed and implemented. The physical layer of the interface at the base station is implemented with the CDMA ASICs and control circuits in channel card of the BTS. We present the design perspectives and structural illustration of the BTS. Base station modem ASICs and their control to implement the CDMA receiver, Baseband and RF signal processing blocks, and BTS controller are described. Elaborate power control is essential to ensure the high capacity which is one of advantages of the CDMA technology. The closed loop reverse link power control and the forward link power control operated in the BTS are described.

• Asia Marketing Journal
• /
• v.20 no.1
• /
• pp.49-68
• /
• 2018

It is appropriate and useful to interpret some product classification schemes as buyer behavior models; such classifications permit investigations of discrepancies between classification predictions and actual buyer behavior. We review existing product classifications and identify underlying behavioral assumptions of various classification schemes that have been used in the marketing discipline for more than nine decades. Recognizing the irrelevance of existing product classifications for current products, we propose a new reclassification framework by incorporating transparency concepts. Based on this extended product classification, we highlight the potential roles of product classification study as an important link between consumer research and marketing strategy, emphasizing behavioral implications.

• Journal of Power Electronics
• /
• v.18 no.2
• /
• pp.445-455
• /
• 2018

A novel algorithm is proposed to regulate the neutral point potential in neutral point clamped three-level inverters. Oscillations of the neutral point potential and an unbalanced dc-link voltage cause distortions of the output voltage. Large capacitors, which make the application costly and bulky, are needed to eliminate oscillations. Thus, the algorithm proposed in this paper utilizes the finite-control-set model predictive control and the multistage medium vector to solve these issues. The proposed strategy consists of a two-step prediction and a cost function to evaluate the selected multistage medium vector. Unlike the virtual vector method, the multistage medium vector is a mixture of the virtual vector and the original vector. In addition, its amplitude is variable. The neutral point current generated by it can be used to adjust the neutral point potential. When compared with the virtual vector method, the multistage medium vector contributes to decreasing the regulation time when the modulation index is high. The vectors are rearranged to cope with the variable switching frequency of the model predictive control. Simulation and experimental results verify the validity of the proposed strategy.

• Clinical and Experimental Pediatrics
• /
• v.45 no.8
• /
• pp.973-979
• /
• 2002

Purpose : Recently, a number of rapid antigen detection tests have been available to diagnose group A streptococcal pharyngotonsillitis. The purpose of this study was to determine the sensitivity, specificity and consistency of the two rapid antigen detection tests. Methods : Among the patients who visited our clinic from November 2001 to February 2002, 61 patients who had clinical findings of pharyngeal erythema or edema, pharyngeal exudates and soft palatine petechiae were enrolled in our study. A total of 61 patients were tested with rapid antigen detection tests and throat culture. BD $LINK2^{TM}$ Strep A(Becton, Dickinson & Company, U.S.A.) and $QuickVue^{(R)}$ $In-Line^{TM}$(Quidel Corporation, U.S.A.) were selected for rapid antigen detection tests. Results : Of the 61 patients tested, 22 patients were confirmed as group A streptococcal pharyngotonsillitis by throat culture. The BD $LINK2^{TM}$ Strep A had a sensitivity of 81.8% and a specificity 89.7%. The positive and negative predictive values were 81.8% and 89.7%, respectively. The $QuickVue^{(R)}$ $In-Line^{TM}$ had a sensitivity of 77.3% and a specificity of 100%. The positive and negative predictive values were 100% and 88.6%, respectively. The kappa values of BD $LINK2^{TM}$ Strep A and $QuickVue^{(R)}$ $In-Line^{TM}$ were 0.72 and 0.81, respectively. Conclusion : In addition to high sensitivity, specificity and consistency, both kits are easy to use and simple to interpret, and therefore have the potential to be used with backup throat culture for diagnosis of acute pharyngotonsillitis.

• Journal of Korea Water Resources Association
• /
• v.40 no.4
• /
• pp.313-324
• /
• 2007

An irregular cell-based numerical model was developed to analyze underground space flooding. In this model, the flow characteristics in underground space were computed by link-node system. Also, the model can simulate the underground flood flow related to the influence of stairs and wall-structures. Empirical discharge formula were introduced to analyze weir-type flow for shopping mall, and channel-type flow for subway railroad respectively. The simulated results matched in reasonable range compared with the observed depth. The dual-drainage inundation analysis model and the underground space flood analysis model were integrated using visual basic application of ArcGIS system. The developed model can help the decision support system of flood control authority for redesigning and constructing flood prevention structures and making the potential inundation zone, and establishing flood-mitigation measures.

• The KIPS Transactions:PartC
• /
• v.16C no.3
• /
• pp.407-416
• /
• 2009

Recently, various application services in wireless sensor networks are more considered than before, and thus reliable and secure communication of sensor network is turning out as one of essential issues. This paper studies such communication in IEEE 802.15.4 based sensor network. We present IMHRS (IEEE 802.15.4 MAC-based Hybrid hop-by-hop Reliability Scheme) employing EHHR (Enhanced Hop-by-Hop Reliability), which uses Hop-cache and Hop-ack and ALC (Adaptive Link Control), which considers link status and packet type. Also, by selecting security suite depending on network and application type, energy efficiency is considered based on HAS (Hybrid Adaptive Security) Framework. The presented schemes are evaluated by simulations and experiments. Besides, the prototype system is developed and tested to show the potential efficiency.

• Journal of Korean Society of Transportation
• /
• v.22 no.2 s.73
• /
• pp.121-130
• /
• 2004

In these days, multiple-path generation method is highly demanded in practice and research areas, which can represents realistically travelers behavior in choosing possible alternative paths. The multiple-path generation algorithm is one of the key components for policy analysis related to ATIS, DRGS and ATMS in ITS. This study suggested a method to generate multiple Possible paths from an origin to a destination. The approach of the suggested method is different from an other existing methods(K-shortest path algorithm) such as link elimination approach, link penalty approach and simulation approach. The result of the multi-label vine-building shortest path algorithm(MVA) by Kim (1998) and Kim(2001) was used to generate multiple reasonable possible paths with the concept of the rational upper boundary. Because the MVA algorithm records the cost, back-node and back-back node of the minimum path from the origin to the concerned node(intersection) for each direction to the node, many potential possible paths can be generated by tracing back. Among such large number of the potential possible paths, the algorithm distinguishes reasonable alternative paths from the unrealistic potential possible paths by using the concept of the rational upper boundary. The study also shows the very simple network examples to help the concept of the suggested path generation algorithm.

• Journal of Power Electronics
• /
• v.14 no.2
• /
• pp.315-323
• /
• 2014

An optimized space vector pulse width modulation (SVPWM) method with common mode voltage elimination and neutral point potential balancing is proposed for an open-end winding induction motor. The motor is fed from both of the ends with two neutral point clamped (NPC) three-level inverters. In order to eliminate the common mode voltage of the motor ends and balance the neutral point potential of the DC link, only zero common mode voltage vectors are used and a balancing control factor is gained from calculation in the strategy. In order to improve the harmonic characteristics of the output voltages and currents, the balancing control factor is regulated properly and the theoretical analysis is provided. Simulation and experimental results show that by adopting the proposed method, the common mode voltage can be completely eliminated, the neutral point potential can be accurately balanced and the harmonic performance for the output voltages and currents can be effectively improved.