• 대한정형도수물리치료학회지
• /
• 제6권1호
• /
• pp.15-26
• /
• 2000

Purpose : This study was done to examine the actual effect of the scapular position in these flexibility tests. The purpose of this study was to examine the differences between the measurement of SRT(Sit-and-Reach Test) without intentional abduction of the scapular (pre-test) and with intentional abduction of the scapular (post-test). The hypothesis is: 1. There is no differences in the SRT result of the pre-test and the post-test. 2. There is no differences in the HJA(Hip Joint Angle) result of the pre-test and the post-test. 3. There is no differences in the Spine Motion Test(SMT) result of the pre-test and the post-test. Method : The total 60 people (30 men, 30 women) were participated in this study. In the pre-test, the subjects were asked to sit on the examination table and try the SRT motion; and then the HJA, SRT and the SMT numerical values were taken. In the post-test. the subjects were instructed to intentionally bring the scapula outward from the midline; and the HJA, SRT and the SMT numerical values were taken. Result : In the pre-test. the SRT result averaged 34.17cm. and in the post-test. the SRT result averaged 36.68cm. The difference was about 2.81cm which showed a significant mean statistically (p<0.01). The measurement increased by 8.22%. The HJA was $85.9^{\circ}$ in pre-test, and it was $85.5^{\circ}$ in post-test. giving the $0.4^{\circ}$ differences. Therefore, it didn't have a statistical mean (p>0.05). The SMT value was 69.56cm in the pre-test. and it was 69.28cm in the post-test, about 0.28cm decreased. Therefore, it didn't have a statistical mean (p>0.05). SRT values and HJA values were correlated (p<0.01). SMT values and SRT values (p<0.01), and SMT values and HJA values(p<0.05) were each in counter correlation. Conclusion : The result of the SRT without intentional scapular abduction (34.17cm) and with intentional scapular abduction (36.68cm) showed a significant increase about 8.22% (p<0.01). In SRT, the effect of the intentional scapular abduction on SMT showed no significant means, the pretest value being 69.56cm and the post-test value being 69.28cm (p>0.05).

• 정보보호학회논문지
• /
• 제22권4호
• /
• pp.809-817
• /
• 2012

OSI 7계층 DDoS 공격 기법중 하나인 HTTP POST DDoS 공격은 서버의 자원을 고갈시켜 정상적인 서비스를 방해하는 서비스 거부 공격 기법이다. 이 공격은 적은 양의 공격 트래픽만으로도 효과적인 공격이 가능하며 정상적인 TCP 연결을 이용하고 있어 정상적인 사용자 트래픽과 공격 트래픽을 구분하는 것이 어렵다. 본 논문에서는 HTTP POST DDoS 공격에 대한 대응 방안으로 비정상 HTTP POST 트래픽 탐지 알고리즘과 HTTP POST 페이지별 Content-Length 제한기법을 제안한다. 제안한 방안은 HTTP POST 공격도구인 r-u-dead-yet과 자체 개발한 공격 도구를 이용하여 HTTP POST DDoS 공격을 오탐 없이 탐지 대응하였음을 보여주었다.

• 경영정보학연구
• /
• 제19권4호
• /
• pp.171-182
• /
• 2017

범세계적 경제위기 이후 많은 기업들은 극심한 경쟁 하에서의 생존 및 경쟁력 강화/유지 전략으로 인수합병(M&A)을 고려하고 있으며, 특히 최근 들어 IT 기반 기술 집약적 기업의 인수합병이 증가하고 있다. 본 연구는 IT 산업에 내재되어 있는 특성에 대한 이해를 바탕으로 IT 기업 인수시 동반되는 위험을 인수합병 이후 기업의 성과에 대한 변동성을 이용하여 정량적으로 측정하고, 더 나아가 인수합병으로 인한 장기적 위험을 완화시킬 수 있는 요인들을 도출하고자 하였다. 1990년에서 2016년까지 이루어진 기업 인수합병 데이터를 이용하여 분석한 결과, 상장 이전 인수/합병 경험이 많은 기업이 IT 기업을 인수하는데 더 적극적이며, 네트워크 외부성 효과로 인해 시장형성 초기 선점효과의 역할이 증대됨에 따라 상대적으로 규모가 작은 비상장 IT 기업들도 많이 인수/합병 대상이 된 것으로 나타났다. 또한 IT 기업을 인수하는 경우 인수 기업의 사후적 기업 성과의 변동성이 증가하지만, 관련 (related) 산업 내에서 IT 기업을 인수할 경우 변동성 증가폭이 완화되는 것을 보여준다.

• Steel and Composite Structures
• /
• 제24권5호
• /
• pp.579-589
• /
• 2017

The objective of this work is to analyze post-buckling of functionally graded (FG) beams with porosity effect under compression load. Material properties of the beam change in the thickness direction according to power-law distributions with different porosity models. It is known that post-buckling problems are geometrically nonlinear problems. In the nonlinear kinematic model of the beam, total Lagrangian finite element model of two dimensional (2-D) continuum is used in conjunction with the Newton-Raphson method. In the study, the effects of material distribution, porosity parameters, compression loads on the post-buckling behavior of FG beams are investigated and discussed with porosity effects. Also, the effects of the different porosity models on the FG beams are investigated in post-buckling case.

• 한국정밀공학회지
• /
• 제17권5호
• /
• pp.116-123
• /
• 2000

This paper presents an NC code post-processor that adjusts feedrates to keep the variation of metal removal rate along the tool paths minimum. Metal removal rate is estimated by virtually machining the part, whose surface model is built from a series of NC codes defined in operation plan, with cutting-tool-assembly models, whose geometry are defined in a machining database. The NC code post-processor modifies the feedrates by the adjustment rules, which are based on the machining knowledge for effective machining. This paper illustrates a procedure fur grouping machining conditions and we also show how to determine an adjustment rule for a machining-condition group. An example part was machined and it shows that the variation of cutting force was dramatically reduced after applying the NC code post-processor. The NC code post-processor is expected to increase productivity while maintaining the quality of the machined part.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.279-284
• /
• 2000

The bridge is nation's principal structure and its influence for national economy is enormous. But it is essential for maintenance of deteriorated bridge because of the increased service life and the decreased performance. For the bridge reinforced by continuos slabs and post-tensioning, we evaluate th stress properties of girders and internal support. Results are almost coincidence between measured data in the field and analysed data by computer. We compared the effects by successive order of post- tensioning and order considered distribution of each girder's camber and stress. Bridge's camber and stress showed respectively symmetry and asymmetry shape by post tensioning order. For the effect of post-tensioning force partition, we divided the post-tensioning force into 3 types (100%, 20%, 30%), and the results show t도 difference of final stress and camber.

• 한국전기전자재료학회논문지
• /
• 제13권1호
• /
• pp.28-32
• /
• 2000

Structural and electrical properties of (Ba, Sr)TiO\ulcorner (BST) thin films prepared by pulsed laser depositon were investigated to verify the influences of post-annealing in oxygen ambient. Increase of post-anneal-ing time in oxygen ambient resulted in not only grain growth but also improvement of crystallinity of BST films. Although the post-annealing in oxygen ambient resulted in the increase of surface roughness, it assisted the dielectric constant increase by eliminating oxygen vacancies. The electrical property enhancement including high dielectric constant and low leakage current density was associated with introducing high pressure of oxygen during the post-annealing.

• 한국분무공학회지
• /
• 제22권2호
• /
• pp.87-95
• /
• 2017

Recently, as the interest in environmental issues have increased around the world, the regulation on vehicle exhaust have been tightened in each country. To satisfy such tightened exhaust regulation, automotive manufactures are forced to equipped Diesel Particulate Filter (DPF) at Diesel vehicles. If DPF is used for a long time, DPF regeneration should be performed. The objective of this study is to research on post injection for DPF regeneration. The result of the study was that it was desired that retarding post injection timing, lower load of engine and smaller the amount of main fuel injection, for DPF regeneration. Oil dilution was tended to increase as load was lower, amount of post injection was increased, and post injection timing was retarded.

• 대한소아치과학회지
• /
• 제25권3호
• /
• pp.627-634
• /
• 1998

Children who have severely destructive anterior primary dentition, as in nursing-bottle caries, in trauma, in rampant caries and in developmental defects, present the dentist with one of the most perplexing situations in dentistry. Especially, children with managed behavor difficultly is very severly situations. This paper reported a new technique for the utilization of resin post and strip crown to indirect methods on severely destructive primary anterior teeth. We name it "indirect short resin post crown" in this paper. Indirect technique be considered to be a simple, a retentive, intensive, color-stable and esthetic restoration.

• PNF and Movement
• /
• 제6권3호
• /
• pp.11-18
• /
• 2008

Purpose : The purpose of this study was to evaluate Influence of Stretching exercise on Flexibility of Trunk and Equilibrium Ability in Post-Adolescent. Methods : Stretching group(n=20), control group(n=20) measured trunk extension ROM, trunk flexion ROM, trunk lateral flexion ROM, and equilibrium ability at pre-intervention, post-intervention in 3 weeks, post-intervention in 6 weeks. Results : Trunk extension ROM, trunk flexion ROM, trunk lateral flexion ROM, and equilibrium ability of stretching group was significantly increased within the intervention period (p<.05). The trunk extension ROM, trunk lateral flexion ROM, equilibrium ability was significantly different among the experimental groups at in 3 weeks and in 6 weeks, but trunk flexion ROM was significantly different at only in 6 weeks(p<.05). Conclusion : In conclusion, it was found stretching exercise can increase Flexibility of Trunk and Equilibrium Ability. stretching exercise need to be applied for Post-Adolescent.