• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.319-322
• /
• 2001

The proposed system was composed of pre-processor which was executing binary/high-pass filtering and post-processor which ranged from statistic data to prediction. In post-processor work, step one was filter process of image, step two was image recognition, and step three was destruction degree/time prediction. After these processing, we could predict image of the last destruction timestamp. This research was produced variation value according to growth of tree pattern. This result showed improved correction, when this research was applied image Processing. Pre-processing step of original image had good result binary work after high pass- filter execution. In the case of using partial discharge of the image, our research could predict the last destruction timestamp. By means of experimental data, this Prediction system was acquired ${\pm}$3.2% error range.

• Journal of radiological science and technology
• /
• v.44 no.4
• /
• pp.295-300
• /
• 2021

This study aims to present new chest AP examination exposure conditions through a study on the effect on image quality and patient dose by applying high tube voltage and scatter ray post-processing software during chest AP examination in digital radiography equipment. This study was used a human body phantom and in the chest AP position, the dosimeter was placed horizontally at the thoracic spine 6. The experiment was conducted by dividing into a low tube voltage (70 kVp, 400 mA, 3.2 mAs) group and a high tube voltage (100 kVp, 400 mA, 1.2 mAs) group. The collimation size (14″× 17″) and the source to image receptor distance(110 cm) were same applied to both groups. Radiation dose was presented to dose area product and entrance surface dose. Image quality was compared and analyzed by comparing the difference between the signal-to-noise ratio and the contrast-to-noise ratio of the image according to the application of the scatter ray post-processing software under each condition. The average value of the entrance surface dose in the low and high tube voltage conditions was 93.04±0.45 µGy and 94.25±1.51 µGy, which was slightly higher in the high tube voltage condition, but the dose area product was 0.97±0.04 µGy and 0.93±0.01 µGy. There was a statistically significant difference in the group mean value(p<0.01). In terms of image quality, the values of the signal-to-noise ratio and the contrast noise ratio were higher in the high tube voltage than in the low tube voltage, and decreased when the scattering line post-processing function was used, but the contrast resolution was improved. If there is a scatter ray post-processing function during chest AP examination, it is helpful to actively utilize it to improve the image quality. However, when this function is not available, I thought that applying a higher tube voltage state than a low tube voltage state will help to realize images with a large amount of information without changing the dose.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.6 no.2
• /
• pp.65-79
• /
• 2003

In this study GIS based pre- and post-processing tool for the Visual MODFLOW that is specific software to model groundwater flow is developed. This tool not only makes input data scientifically but also manages input and output data in terms of the groundwater flow analysis. In addition it can storage project products systematically into Oracle database. The most characteristic figure of this processing tool is to provide the module, which automatically or semi automatically develops various grid cell sizes using GIS ArcView and also produces DXF files reflecting various boundary conditions in the modeling zone. In particular, eminences of this research are to create 3 dimensional hydrogeological structures with 2 dimensional GIS ArcView and to conduct pre- and post- processing along with same topology and data format of the MODFLOW.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.6
• /
• pp.475-478
• /
• 2002

Post-harvest treatment for barley production requires many steps including drying, cleaning, and packing, and these steps be needed many labor input. Rice processing complex (RPC) is useful for post harvest management system in rice production. However, it is rare to be used for barley production. This study was conducted to explore the variations of quality and labor saving between conventional method and bulk-management system in post-harvest using RPC. The sorting rate was not different between manual method and bulk management. The hardness of non-polished grain was ranged 10,175-10,329 g/$3.14mm^2$, and that for non-polished grain was higher than that for polished grain, but there was not different between drying method. There was not be showed the hunter's value such as L, a and b according to drying method. Cooking characters such as water absorption ratio, swelling ratio, and water soluble extracts by circulated or continued dryer was higher than manual drying using solar heat. Labor input per ha for each cultivation process in bulk-management of barley using rice processing complex was 21 hours, compared to 46 hr/ha in the conventional method, labor input was greatly saved by up to 54.3% in the post-harvest bulk management system.

• Journal of Fashion Business
• /
• v.22 no.2
• /
• pp.107-117
• /
• 2018

Nettle fiber, a sustainable fiber, was applied to the fabrication of denim to identify changes in textile appearance and formation. For the weaving of nettle denim, nine specimens, distinguished by three kinds of composite use of nettle fiber and three stages of fabrication processes, were used. The kinetic characteristics of the nine specimens were measured by the KES-FB system, and the images of the specimens of finished denim textiles, captured with a CCD Camera, were analyzed. In terms of the extensibility (EM) of nettle denim, all specimens showed post-processing increase, thereby suggesting an easy transformation of the textile as a source material for denim fabric. The effects of washing on the woven formation of denim were also identified. The geometric roughness (SMD), the problematic property of bast-fiber-like nettle fiber, was found to be decreased by washing. In terms of the bending rigidity (B) of the textile, the post-processing shrinking percentage of elastic nettle denim was found to decrease; all specimens that underwent bio-washing only also manifested that post-processing elasticity increased. To improve the draping of nettle denim, a mixed spinning together with washing were found to be advantageous. In terms of the shear stiffness (G), which is closely associated with the appearance of clothes, the formation of textile was improved regardless of the types of processing, including bio-washing and bleach washing.

• Proceedings of the IEEK Conference
• /
• 2001.06d
• /
• pp.53-56
• /
• 2001

This paper presents a computationally efficient post-processing algorithm for HDTV. The proposed algorithm can reduce both blocking artifacts and mosquito noise while preserving the sharpness and naturalness of the reconstructed video signal. Performance improvements compared with other techniques are obtained according to simulation results.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.11-14
• /
• 2003

In block-based lossy video compression, severe quantization causes discontinuities along block boundaries so that annoying blocking artifacts are visible in decoded video imases. These blocking artifacts significantly decrease the subjective image quality. In order to reduce the blocking artifacts in decoded images, many algorithms have been proposed However studies on so called, corner outliers, have been very limited. Corner outliers make image edges look disconnected from those of neighboring blocks at cross block boundary. In order to solve this problem, we propose a corner outlier detection and compensation algorithm as post-processing in spatial domain The experiment results show that the proposed method provides much improved subjective image quality.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.5
• /
• pp.652-659
• /
• 1998

The present study is aimed to develop a new PIV operating software through optimization of vector tracking identification including versatile pre-processings and post-processing techniques. And the result exhibits an improved version corresponding various input and output multimedia compared to previous commercial software developed by other makers. An upgraded identification method called grey-level cross correlation coefficient method by direct calculation is suggested and related user-friendly pop-up menu are also represented. Post-processings comprising turbulence statistics are also introduced with graphic output functions.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.10a
• /
• pp.436-438
• /
• 2016

도로명주소는 2014년부터 본격 사용 중에 있으며 점차 활용이 증가하고 있다. 도로명은 행정구역과 함께 사용되며 거점을 표현하는 기준점으로서 도로명의 간결성은 우편/물류 등의 다양한 분야에서 주소정보를 입력하는 업무에서 중요한 요소이다. 본 논문에서는 도로명주소 체계에서 정의된 도로명 부여 규칙을 토대로 실제 사용 중인 도로명에 대해 살펴보고 도로명 주소 입력 간편화 등의 관점에서의 개선 방향을 제시한다.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.35-38
• /
• 2000

Low bit rate image/video coding is essential for many visual communication applications. When bit rates become low, most compression algorithms yield visually blocking artifacts that highly degrade the perceptual quality, and post-processing approaches provide one attractive solution. In this paper, we provide simple and very efficient blocking artifacts reduction method using constrained random value addition. Our method is simple enough to be used for real-time post-processing of video.